advanced search
1359 results
new
SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...
New in: 2024
new
SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - ...
new
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
new
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
new
TWIN-SHAFT HYDRAULIC SHREDDER, Hopper size: 2.5 x 1.8 x 1.2 m (or customised), construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel hexagonal shafts with differentiated speed 16-21 rpm, no. 30 blades, 50 mm, 2 teeth, very easy blade maintenance, welded profile connection frame 1.3 x 1.0 x 1.5 m approx., No. 2 gearboxes, No. 2 electric motors 37,5 kW ( 100 Hp) total power - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles ...
New in: 2024
new
SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 “ Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame ...
New in: 2010
used
Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ...
New in: 2009
used
Technical data baler:Manufacturer unoTech GmbH, Niederlangen, GermanyTyp 120 V5Year of construction 2009Press force main press 100 tonsSpecific press force 145 N/m²Max. cutting force 120 tonsPress force free stamper 25 tonsFeed channel 2,000 x 1,020 mm (l x w)Capacity per cycle time 1,5 m³Theoretic throughput rate 650 m³/hourBale size 1,100 x 750 mm (w x h)Driving motor 2 x 75 kWConnected load 160 kWRated current 280 ATying system 5-fold vertical, fully automaticThroughput rate at abulk weight of 20 to 30 kg/cbm up to 15 tons/hourbulk weight of 35 to 50 kg/cbm up to 23 tons/hourbulk weight of 60 kg/cbm up to 27 tons/hourbulk weight of 100 kg/cbm up to 44 tons/hourBale weight 600 up to 900 kg, depends on materialSPS controller (manuf., type) Siemens S7 300Operating panel (manuf., type) Siemens SIMATICTransport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x w x h)Machine weigh ...
New in: 2010
used
Technical data on the Lindemann shredding plant with light material separator, vibrating screen and conveyor technology:Manufacturer Lindemann GmbHType 820-20 (hammer mill)Year of construction 2010Drive power 110 kWRotor 820 mmThroughput capacity approx. 2 tonnes/hour, depending on materialScope of delivery:1 piece feed hopper with screw conveyor, colour grey1 piece hammer mill, Lindemann, type 820-20, colour beige/yellow1 piece discharge belt, roller belt conveyor, colour blue/grey1 piece magnetic roller conveyor, colour blue1 piece light material separator, colour white1 piece vibrating sieve, colour white1 blower, colour white1 piece Cyclone with big bag filling rack, colour white/greyComments:Unfortunately, no further technical data or information on the plant is available. However, the shredding plant is currently still set up, connected to electricity and could be inspected by appo ...
New in: 1999
used
Briquette diameter: mm 180, Briquette diameter large mm 195, Force main cylinder kN 8,500, Briquette density steel, cast iron Kg/dm 5,5, Briquette density aluminium Kg/dm3 2,4, Briquette density brass, copper Kg/dm3 7.0, Capacity steel/cast iron t/h 7.5, Capacity aluminium t/h 3.5, Capacity brass/copper t/h 8.0, Drive power standard kW 180, Footprint m x m 6.5 x 8.5, Machine weight t 45, Year: 1999, Immediately available, Briquette diameter: mm 180, Year: 1999
New in: 2016
used
ATLAS 350 MH blue, Technical data:, Engine:, Power: 180 kW/245 hp, Model: Deutz/Turbocharger, Cooling system: Water-cooled, Year of construction: 2016, Model: 2017, Operating hours: 7500 h, Weight: 38 tons, Machine is available immediately., Machine is in very good used condition., power: 180 kW/245 hp, model: 2017, Cooling system: Water cooled, Year of construction: 2016, model: 2017, Operating hours: 7500 hours, Weight: 38 t
New in: 1999
used
Specifications Maximum pressure: 30 tons Press force: 3.13 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 300-350 kg Power supply: 400V / 5.5 kW Year of construction: 1999 Productivity: approx. 3 bales/hr If you have any questions, please call us: +48 696 072 985
New in: 2013
used
Baler HSM VK 4212, built in 2013, including spare parts package Manufacturer: HSM Type: VK 4212 Year of construction: 2013 Hours: 17,321 Press force: 42 t Drive power: 22 kW Idle cycle time: 12.7 s Filling opening: 620 x 1140 mm (WxL) Capacity: 50 kg/m³: 9.05 t/h Bale size: 700 x 800 x 600-1200 mm Binding: 4-fold, automatic Transport dimensions: approx. 7,200 x 2,000 x 2,100 mm (LxWxH) Weight: approx. 6,300 kg Materials: paper, cardboard, die-cuts, foil
New in: 2018
used
CMG SINGLE SHAFT SHREDDER TODAY AT REDUCED PRICE, mod TRM 1500, 80,5 kw drive, rotor width 1.500 mm., rotor diam. 400 mm., constructed in 2018, machine offered reconditioned, Possible addition of [extraction belt with magnetic drum](https://www.germanplast.eu/listings/4115563-used-extraction-belt -450-x-3-500-mm-magnetic-drum) (as new +14.000€), Constructors description:, High efficiency shredders: patented blade design, Patented shredder blade design provides first-class cutting precision. The blade is inserted into a V-shaped opening on the rotor. This type of assembly guarantees the highest resistance to mechanical stress and the best cutting performance. The precision of shredding provides dimensional homogeneity and the absence of small particles. In addition to the unique design of the blades, each CMG shredder is equipped with advanced controls to independently adjust the motor ...
New in: 2003
used
ID3259 Doppstadt DW2560 BK Bison year/Year of construction 2003 approx. 8130 hours/hours 28 t Wood shredder, screening system new approx. 1200 hours ago, gearbox overhauled and shaft replaced approx. 1200 hours ago Wood shredder, screening plant new approx. 1200 hours ago, gearbox overhauled and shaft renewed approx. 1200 hours ago
New in: 2022
used
ID3254 Franzoi TAZ280 year/Year of construction 2022 approx. 50 hours/hours 16.5 t Wood shredder, 2-shaft shredder Wood Shredder, 2 Shaft Shredder
New in: 2014
used
ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder
New in: 2001
used
ID3252 Doppstadt SM618 Profi year/Year of construction 2001 approx. 1011 hours acc. Counter/hours according to counter 15 t Drum sieve, with 3 sieves (15/20?/50 mm perforation) Drum sieve, with 3 sieves (15/20?/50 mm perforation)
New in: 2001
used
Specifications Maximum pressure: 78 tons Pressing force: 95 tons/m² Duct cross-section: 750 x 1100 mm Bale weight: 450-600 kg Power supply: 400 V/ 55 kW Year of construction: 2001 Number of ties: 5-fold vertical, Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 24 tones
New in: 2024
new
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](https://www.germanplast.eu/listings/5003567-germanplast-vibrat ing-screen-round-type) (available separately), This machine is to be electrically conne ...