Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg
Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg
Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg
Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg
Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other)Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg
Description: JPC HT 18 mini-excavator, equipped with twin-cylinder diesel engine, joystick and electric controls, swing arm, hydraulic hammer system, never used, 0 hours The color of the excavator may vary depending on availability (yellow, red, other)Approx. Onsite Dimension. (l x w x h): 2,700 x 1,100 x 2,600 mm, weight approx.: 1,650 kg
Description: Serial number: 22C050362 Operating hours read: 86.4 h Own weight: 880 kg Capacity: 0.025 m³ Power: 7.6 kW Equipment: with front-mounted dozer blade, Seats: 1 with 2 pcs. Armrests, still wrapped, with backhoe W approx. 360 mm, 1 pc. Grapple B 610 mm, 1 pc. Slope bucket with swivel function W approx. 750 mm, 1 pc. Backhoe bucket B 170 mm, 1 pc. Ripper B 500 mm, 1 pc. Earth auger L approx. 1,400 mm, 1 pc. Hydraulic chisel with attachment L approx. 950 mm Condition note: various abrasions and paint damage all around mini excavator Location: A-3242 TexingApprox. Onsite Dimension. (l x w x h): 2,500 x 1,000 x 2,200 mm, weight approx.: 1,000 kg
Description: FIN: WNCE1602H00002096 Model: EZ36 Power: 18.2 kW Operating weight: 3,973 kg Transport weight: 3,801 kg read operating hours: 435 h Inspection sticker read: 11/2021, next service according to inspection sticker: 03/2023 Equipment: with front-mounted dozer blade, length approx. 175 cm, with rotatable quick-release plate GELL, 1 pc. Backhoe bucket GELL with tines, length 66 cm, fabric upholstery, seats: 1, 2 pcs. Front headlights, 2 pcs. rear headlights, cab heating, glazed safety cab, upper windshield retractable inwards, lower windshield removable, windshield wiper system, radio preparation, antenna, loudspeaker, wiring, LED headlights, Powertilt Known defects: various abrasions, paint damage and rust spots all around 'excavator Location: A-3242 TexingApprox. Onsite Dimension. (l x w x h): 5,500 x 1,800 x 2,600 mm, weight approx.: 3,900 kg
Description: Serial number WF16027794, up to a maximum of 15 t, with radio and evaluation device, including trolley, readability 5 kgApprox. Onsite Dimension. (l x w x h): 800 x 500 x 1,100 mm, weight approx.: 80 kg
Description: with radio and evaluation device, weighing range up to 10 t, including trolleyApprox. Onsite Dimension. (l x w x h): 900 x 400 x 900 mm, weight approx.: 30 kg
Description: maximum 600 kg, with radio evaluation deviceApprox. Onsite Dimension. (l x w x h): 400 x 300 x 150 mm, weight approx.: 15 kg
Poclain travel motor, number: 05816293, code B2433OU, suitable for Bomag rollers
Spring promotion!! In stock!Genie GS-3246 E-Drive from 2023 NEW!Working height: 11.78m, platform height: 9.78mPlatform length: 2.26mPlatform length extended: 3.18mLength: 2.44m Width: 1.16mOwn weight: 2,367kgLoad capacity: 318kgMax. people: inside 2 p outside 1 p.Two-wheel front wheel drive 24V(4x6V)Non-marking solid rubber tires
Description: Concrete mixing bucket, 250 litres, standardd connection, pressure 215 bar, flow rate 90lt/min, automatic material unloadingApprox. Onsite Dimension. (l x w x h): 1,500 x 900 x 700 mm, weight approx.: 370 kg
6 m lifting height, 2500 kg load capacity, with pallet forks & hyd. additional control circuit, 4905 kg net weight, Hp / kw: 75 hp / 56 kW, Working hours: 50, Year of construction: 2020, Lifting capacity (kg): 2500, Lifting height (cm): 600
Description: serial number: 33388397 model range: Crocodile , operating pressure: 280 - 320 bar operating weight: 1300 kg Approx. Onsite Dimension. (l x w x h): 1,250 x 800 x 1,000 mm, weight approx.: 1,500 kg
This Robot BW2041 series dry mounted dirty water pumps features a vortex impeller, which ensures good solids handling. This pump is for the application as dirty water pump or sewage pump. , In stock and immediately available, , Throughput capacity: 135 m3/h, Max dirt passage: 100 mm, Motor brand: DEUTZ F2M 1011F, Max. head: 25 MWK, Max dirt passag: 1800 rpm, , = More information =, , Year of manufacture: 2004, Empty weight: 1.500 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Al ...
Description: Kit consisting of 2 buckets for excavators, 200 mm digging bucket + 800 mm leveling bucket, attachment for all JPC excavators from mod ht12 up to mod ht25Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 20 kg