subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 703)
Compressed air connection: 6 bar, connected load: 0.75 kW, can be inspected on site. ... mais informação
Cutting capacity: 130 cuts/min, operating pressure: 7-10bar, connected load: 19kW, length: 1260mm, width: 2059mm, height: 1845-1895mm, weight: 1.5t, with documentation and frame for the molds, an on-site inspection is possible, but not under power. ... mais informação
Was used for the production of double cream cheese, low-fat quark, as well as 20/40% quark and skyr, milk with 3.7% fat was also concentrated to 37% dry matter, throughput capacity: approx. 3500-5000 litres with a service life of 8 hours, includes (1) stage 1 with six 6 inch pressure pipes, each with two spiral wound modules, filter Mikrodyn Nadir DS-IP020-6338E1, filter area: 13.4m²/module, total filter area: 160.8m², flow rate centrifugal pump: 145m³/h, 3.5bar (2) Stage 2 with four pressure pipes in the same design as in stage 1, filter area: 107.2m², flow rate centrifugal pump: 160m³/h, 5bar (3) P&F module Tetra M37/9/2, filter area: 9m², flow rate positive displacement pump: 75m³/h, 6bar, an on-site inspection is possible.
Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible.
Capacity: 200-800kg/h. The machine is used for the production of stretched curd. Includes: Rising bowl: Prima, cutting device: Prima, lifting and tilting device: Frontmatec Hygiene - for holding 200 and 300 liter standard loading trolleys for efficient use in the food industry. ... mais informação
Capacity: 250 cuts/min, minimum product temperature: -6°C, chamber dimensions X/Y/Z: 600mm/210mm/180mm, blade diameter: 420mm, max. product length: 600mm, cutting thickness range: 0.5mm-30mm. Dimensions X/Y/Z: 1900mm/900mm/2320mm, weight: approx. 420kg. On-site inspection is possible. ... mais informação
Main material: stainless steel, dimensions X/Y/Z: 1490mm/1050mm/2600mm, weight: 500kg. On-site inspection is possible. ... mais informação
Max. tray size: 340mm/280mm, film width: 270mm, speed: 4-5 cycles per minute including gas or vacuum, control: standard Siemens PLC. On-site inspection is possible. ... mais informação
Capacity: 50l, machine dimensions: Length: 880mm, Width: 680mm, Height with flap closed/open: 1030mm/1350mm. On-site inspection is possible. ... mais informação
A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets. ... mais informação
Bowl capacity: 45 l, blade shaft speed: 5100 rpm, cutting speed: 100 m/s. Documentation available. On-site inspection is possible. ... mais informação
Filling opening diameter: 98mm, material: stainless steel, max. output: 1400kg/h, perforated disk: 3mm, dimensions X/Y/Z: approx. 1000mm/850mm/1400mm, weight: approx. 300 kg. ... mais informação
Capacity: 120l, dimensions X/Y/Z: 1300mm/1050mm/1370mm, weight: approx. 900kg. Motor: Voltage: 400V, frequency: 50Hz, power: 42kW (motor rewound in 2000). Including ejector, control with external switch cabinet, 6 + 3 cutter head, galvanized open-end wrench for changing cutter head and documentation. Lap counter defective.
Skinner Weber Type: ASB 560 400V 50Hz 3N Power: 1.1 kW Knife width: 560 mm Cut width: 0-4 mm, optionally 4-8, 6-10, 8-12 mm Dimensions: 2120 x 1000 x 1300 mm Infeed belt width: 490 mm Made of stainless steel Weight: 400 kg Pieces in stock: 1 Condition: Used, in good condition ... mais informação
Can Seaming Machine STA 1200 D With automatic lid feeder Sophisticated, semi-automatic can seaming machine in stainless steel for use in butcheries, laboratories, wet and dry undertakings. Suitable for seaming round tin cans and composite cans. The STA 1200D features an automatic lid feeder with separating magazine. 360° - View Technical data Capacity: max. 1000 cans/hour Rec. annual capacity: max. 200,000 cans/year Diameter: 52 – 99 mm Height: 30 – 300 mm special sizes on request Power supply: 0.75 kW, 3 x 400 VAC+N+PE / 16 A / 50Hz Dimensions: 80 x 50 x 170 cm Weight: 235 kg Air consumption: approx. 4.4 m³/h at 6 bar Acc. to ISO8573-1:2010/7:4.4 (Compressor not included)
Used Wiegand TVR-6-Effect + High Concentrator Evaporator, previously used for whey. Still mounted inside the factory in Spain., 1.Effect, Diameter of the stage 1.050 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 2.Effect, Diameter of the stage 1.050 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 3.Effect, Diameter of the stage 1.000 mm, Diameter of the tubes 31 mm, Length of the tubes 10.000 mm, 4.Effect, Diameter of the stage 600 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, 5.Effect, Diameter of the stage 450 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, 6.Effect, Diameter of the stage 400 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, High Concentrator, Diameter of the stage 400 mm, Diameter of the tubes 41 mm, Length of the tubes 10.000 mm, Additional features:, Including:, - High Conc ...
Kaufler KR370 Slicer Serial: 1210103 2022, Stainless, The Kerslicer range of pendula action slicers offers a slicer/applicator for either online or offline slicing with the possibility for targeting of products, shingled, stacked or just continuous production, slicing thickness from 0mm - 10mm, capacity up to 120 strokes per minute, mobile, 3Ph
Handtmann 310-01 Collating module Serial: 41311 2018, Stainless, collating module for automatic collating of sausages in natural, collagen or alginate casing, new levels of economic efficiency and excellent product quality. This is facilitated by the GM310 collating module due to the customised collating of fresh sausage. Up to 600 portions per min both single or twin lane, 80mm to 400mm individual portions.
Handtmann ZB311 Feed belt Serial: 41312 2018, Stainless, feed belt for external feeding, positioning and loading of single trays, in conjunction with the GM310 collating module (we also have this in stock) guarantees precise sausage depositing into the trays, the ZB311 feed belt is an effective product handling module for sausages in natural, collagen or alginate casing, 13 to 40mm casing calibre, 80 to 310mm portion length, up to 450 portions per min, 3Ph
Clipping machine Manufacturer: Poly Clip Model: PDC 700 For fibrous, plastic, natural and collagen casings Semi-automatic Calibres up to 115 mm Suitable for following clip sizes: S 735 / 740 / 744 Air pressure: 4-6 bar Electric power: 0.1kW ... mais informação