máquinas de processamento de carne e peixe usadas para venda

Product number: 2886 Type: BulkLoader 1000 Serial number: E050970605035 Year of construction: 2021 Belt width: 1000 mm Belt speed: 0.25 - 1 m/min. Infeed height: 1350 mm Infeed hopper size: 1400 x 1900 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 0.12kW Dimensions: 2800 x 2000 x 2400 mm Manual hydraulic lift for cleaning and spray pipe for belt cleaning GEA Conveyor Serial number: E050970105234 Year of construction: 2022 Belt width: 1000 mm Power: 3x400V, 50Hz, 1.1kW Dimensions: 1100 x 1600 x 1600 mm GEA BeltConveyor Serial number: E020970105211 Year of construction: 2022 Belt width: 1000 mm Infeed height: 700 mm Outfeed height: 1050 mm Power: 3 x 400V, 50Hz, 1.7kW Dimensions: 2500 x 1600 x 1150 mm With extractable belt of 600 mm Total dimensions of line: 5750 x 2000 x 2400 mm

Product number: 2885 Type: DKS 701 Serial number: S17251 Year of construction: 2018 Product size: max 200 x 230 mm Chamber length: 700 mm Slice thickness: 1 - 30 mm Power: 3 x 400V, 50Hz, 2.45kW Dimensions: 1800 x 800 x 1350 mm Weight: 280 kg  ... mais informação

Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Product number: 2702 Type: uiendoseur & sausafvuller Serial number: 07008 Year of construction: 2007 Capacity: 13 x 8 cups per minute Depositors: 2 pieces Compressed air: 5 - 6 Bar Power: 3 x 380V, 50Hz, 16A Dimensions: 2300 x 24500 x 2250 mm Two independant depositors used to fill onions or sauce on top of cups over a conveyor.

Product number: 2402 Type: LW 3014 ST Serial number: 44343 Year of construction: 2006 Capacity: 7 baskets Inside diameter: 1100 mm Inside length: 5210 mm Volume: 11200 litres Heating: steam, max 2000 kg/hr Steam pressure: 4 Bar, DN80 Cooling water: 3 - 6 Bar, DN100 Compressed air: 6 - 8 Bar, 37 Nm³/min Power: 3 x 400V, 50Hz, 36kW Baskets: 18 pieces, stainless steel Inside dimensions baskets: 870 x 920 x 910 mm Dimensions: 9000 x 2000 x 2400 mm Including Alfa Laval M10-MFG heat exchanger Including stainless steel tank for condensate Including OKS Otto Klein 3000 litre pressure vessel

Product number: 2217J Type: CBF400 Serial number: 1409 Year of construction: 2001 Belt width: 400 mm Power: 3 x 400V, 50Hz, 6kW Dimensions: 4250 x 950 x 1700 mm Weight: 825 kg  ... mais informação

Product number: 2398 Type: K324AC8VA Serial number: 13346-1 Year of construction: 2013 Bowl: 325 litres Speeds: 6 speeds forward, variable Bowl: 2 speeds Mixing: 2 speeds backwards Knifes: S24 knifesystem Controls: Command 4000 Cooling: N², liquid nitrogen Water: 4 - 6 Bar Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 217kW Weight: 5000 kg With lifter and unloader for 200L tote bins Including spare Emod 200kW main motor

Bandentschwarter Maja ESB 441, various bearings renewed, Dimensions LxWxH approx.: 50x80x128cm, weight approx. 189kg, good used condition, fully functional  ... mais informação

Meat grinder Mado Optimo 2, type MEW 624, 114 stuffing grinder, Machine in stainless steel, 2 speeds, Removable screw housing, with reverse operation, Connection 400V, 6kW, year of construction 2008, Dimensions LxWxH approx. 107x72x115cm, weight approx. 247kg, good used condition, fully functional

Press clearance for boneless hams, Spanish type format, from the manufacturer ROSER, model 02. Rectangular mold in stainless steel. Against molds of technical plastic material Boneless ham format Spanish type of 6 to 7 kg. Interchangeable mold formats. Hydraulic drive. Regulation of massage and pressing time. Safety system operated by two pushbuttons. Built in AISI-304 stainless steel. External measurements: length 1090 mm x width 1650mm x height 2050mm. Weight: 1800kg. Power consumption: 4Kw. 400V. Air consumption: 5 liters/min Production of: 30/120 pcs /h. Ham press, ham press, rectangular ham press, meat machinery, machinery for sausages, machinery for hams. Its condition is excellent re-release. Equipment revised and guaranteed practically new.

LIQUIDATION of the packaging machine, automatic packaging machine brand WALDYSSA model W36. Packaging for trays with stretch film. It is the ideal choice for the different food sections of small and medium-sized points of sale where a significant speed and production rhythm is required, maintaining small dimensions and simplicity of use. External measurements: 4200 mm long x 1410 mm high x 1040 mm wide. Input tape measurements: 2500 mm long x 800 mm high x 300mm wide. Weight 330kg. Electrical power 380V, 3.1KW, 50HZ, Stretch film packaging machine, tray packer, tray packer, packaging machinery. Its condition is excellent re-release. Equipment reviewed and guaranteed.

LIQUIDATION of special vacuum system for piston stuffers that lack vacuum. Manufactured by ANDHER model VAE-10. Its status is of re-release (occasion). Patented system for vacuum stuffing, using concentric funnels attached to any type of stuffer. Improve finish and quality naturally, save gut! The machine is ready to plug in and work with. Thanks to manufacturing based on design and high technology, ANDHER VAE-10 is a Patented System that achieves: - More quality in the product, by eliminating the air inside the casing without added chemistry. - Savings in process time, by not having to puncture the gut to extract the air. - Significant savings in casing, by compacting and completely filling the interior with meat, getting more kilos with less gut. - Improve the presentation, as there are no air spaces. - Reduce the loss and the time of curing or oreo of the sausage. - Eliminate  ...

Thermoforming machine completely rebuilt and revised in its entirety re-release. Manufacturer: DIXIE (GEA GROUP), model: VA2000. Construction aspects: Built in stainless steel materials. EC type-approval. Hygienic design, IP-62. Ease of use and maintenance: High performance. Quick format change, no tools. Operating programs. Programmable feed speed. Minimal maintenance. Vacuum pump BECKER 160 m3/H. Dimensions of the container to be formed inside (format): 150 mm x 120 mm x 4 units per cycle. Overall dimensions: 5600 mm long x 1100 mm wide x 1720 mm high. Suction device for excess film. Electrical power. 380v, 50HZ, 25-35A,

Packaging machine for automatic tray sealing. Manufactured by RETON SUPER SEDER model ET-55GFI. Used equipment, its condition is excellent, fully restored and with guarantee. Measures of the last of the tray to be sealed 310 mm x 330 mm, minutes for film reels of width 400mm. Overall machine dimensions 2200 mm x 1000 mm x 1600 mm high

LIQUIDATION of thermoforming packaging machine completely rebuilt and revised in its entirety re-release. Manufacturer: CFS- KRAMER GREBE- TIROMAT, model: 2500/320. Construction aspects: Built in stainless steel materials. EC type-approval. Hygienic design, IP-62. Ease of use and maintenance: High performance. Quick format change, no tools. Operating programs. Programmable feed speed. Minimal maintenance. Vacuum pump 250 m3/H. Dimensions of the tray to be formed (format): 280 mm x 220 mm. Overall dimensions: 5700 mm long x 900 mm wide x 1920 mm high. Suction device for excess film. Electrical power. 380v, 50HZ, 25-35A,

Rotary packaging machine manufactured by EFABIND, model R4. Specially designed for the process of positioning tubs, dosing and sealing of food liquids. Container measurements: diameter 95mm x 2 containers. It has a production capacity of 1000 – 8000 containers / hour. Made of stainless steel in its entirety. External measurements 2030mm wide x 1300mm deep x 2100mm high.

Automatic traysealer, for preformed containers of last generation, very fast, efficient and with 2 sets of mold. Used equipment completely revised and reconditioned. From the manufacturer CFS, model STAR 2 HS. Built entirely in stainless steel. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing molds, 1st for containers 1/2GN 2 trays per sealing last, Dimensions of the welding area, for the molding of 2 containers at the same time (1/2GN): 260 x 320 mm. Sealing area measures 700 x 300mm. 2nd for containers 1/4GN 5 trays per sealing last. Welding area dimensions, for molding 5 contain ...

Automatic rotary traysealer from the manufacturer VC999, model TS900. It is a traysealer made in Switzerland, with rotary table in 4 positions. The machine is prepared to make up to 4 containers at the same time: only sealing, empty/sealing and vacuum/sealing/modified atmosphere. It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. VC999/TS900 has been designed to offer a compact solution (occupies just under 3m3) and allows, thanks to a high technological content, to meet high production needs (up to 2400 pieces / hour). The solidity and versatility of this model, together with an optimal value for money, have made the VC999/TS900 one of the most successful and highest quality machines on the world market. Built with first-class components, with exclusive noble materials (stainless steel and anodyne ...

Automatic traysealing machine, for preformed containers. Semi new used equipment. From the manufacturer INAVEN MASCHINEN AG (VC999), model TS1200 N. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 2 sealing lasts in different formats. Lasts for sealing 2 containers at the same time. • External dimensions 4400 mm long x 870 mm wide x 1790 mm high, input tape 2700 mm long, output tape 1120 mm long. • Power 6 kW; • Power supply 400 V, 50 Hz; • Measures of containers by molds: 1st Mold 225x180 mm x 2 containers 2nd Mold 180x130 mm x 2 containers • Film width 460 mm; • Roller width 480 mm; � ...

Liquidation of ILPRA automatic traysealer of the FOODPACK series, model 500 v/g. It is a traysealer of Italian manufacture, with rotary table in 2 positions. The machine can perform 4 different packaging functions: sealing only, vacuum/sealing, vacuum/sealing/modified atmosphere (MAP). It is suitable for the use of a wide range of packaging of any material (PP, PS, APET, CPET, cardboard, etc.) using compatible film. Foodpack 500 has been designed to offer a compact solution (occupies just under 2 m / 2 ) and allows, thanks to a high technological content, to meet high production needs (up to 1440 pieces / hour) depending on the type of mold from 1 to 4 containers per cycle. The solidity and versatility of this model, together with an optimal value for money, have made the Foodpack 500 V/G one of the most successful machines. Built with first class components, with exclusive noble materia ...