subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 703)
There are two machines available (1) Pasteuriser Bertsch, output: 8500l/h, controls: Siemens S7 (2) Centrifuge Westfalia, output: 8500l/h, with sieve, the documentation is available. ... mais informação
Cutting capacity: 130 cuts/min, operating pressure: 7-10bar, connected load: 19kW, length: 1260mm, width: 2059mm, height: 1845-1895mm, weight: 1.5t, with documentation and frame for the molds, an on-site inspection is possible, but not under power. ... mais informação
There are two identical cutting machines available, weight: 90kg, with documentation. ... mais informação
Trolley dimensions: 920x910x1950mm, connected load: 24kW, length: 1560mm, height: 2560mm, with documentation, a few years ago the electrics were completely overhauled. ... mais informação
Max. output: 1,2t/h, length: 2620mm, width: 1180mm, height: 1680mm, weight: 1t, with trolley. ... mais informação
Connected load: 13kW, six additional belts are available as spare parts. ... mais informação
Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible.
Was used for the production of double cream cheese, low-fat quark, as well as 20/40% quark and skyr, milk with 3.7% fat was also concentrated to 37% dry matter, throughput capacity: approx. 3500-5000 litres with a service life of 8 hours, includes (1) stage 1 with six 6 inch pressure pipes, each with two spiral wound modules, filter Mikrodyn Nadir DS-IP020-6338E1, filter area: 13.4m²/module, total filter area: 160.8m², flow rate centrifugal pump: 145m³/h, 3.5bar (2) Stage 2 with four pressure pipes in the same design as in stage 1, filter area: 107.2m², flow rate centrifugal pump: 160m³/h, 5bar (3) P&F module Tetra M37/9/2, filter area: 9m², flow rate positive displacement pump: 75m³/h, 6bar, an on-site inspection is possible.
Compressed air connection: 6 bar, connected load: 0.75 kW, can be inspected on site. ... mais informação
Suitable for filling sausages, as well as potato and sausage salads, caliber: 55/60mm, throughput: 3-4 sausages/min, capacity per hopper: approx. 100kg, year of construction: 90s, without documentation, an on-site inspection is possible. ... mais informação
Capacity: 200-800kg/h. The machine is used for the production of stretched curd. Includes: Rising bowl: Prima, cutting device: Prima, lifting and tilting device: Frontmatec Hygiene - for holding 200 and 300 liter standard loading trolleys for efficient use in the food industry. ... mais informação
Operating temperature min./max.: 0°C/30°C, water consumption: 4-8l/min, belt width: 280mm, belt length infeed/outfeed: 5192mm/2484mm. Dimensions X/Y/Z: 3300mm/900mm/1400mm, weight: approx. 900kg. Documentation available. ... mais informação
Capacity: 50l, machine dimensions: Length: 880mm, Width: 680mm, Height with flap closed/open: 1030mm/1350mm. On-site inspection is possible. ... mais informação
Mobile double clipper. These user-friendly and efficient machines handle natural, artificial, and fibrous casings for a variety of portioned food and non-food applications. Durable stainless steel construction. Applications – sausage, fresh ground meats, soy tofu/tempeh/seiten chubs, vegan sausage, fresh ground fish, surimi/fish sausage paste, raw/frozen/refrigerated pet food, pumpable cheese, soup, sauce, and industrial explosives chub packages. Capacity up to 130 cycles / min depending on the product. Air pressure: 6 bar. Power: 380 V - 50 Hz - 0,5 Amp. Stainless steel control panel with Siemens S7-200 PLC and on/off switches., Including ± 40 reels of clips, type XEC21-210T., Additional features:, This machine can be combined with the vacuum filler, Stock Number #1059 (Vemag HP3), see photo. Additional piping in between the 2x machines is excluded., Type of Machine: Double clipper, ...
Compact and versatile vacuum filler for small producers. An individual machine for the production of specialities and equipped with the proven double screw technology as used in large industrial machines. Double screws made out of stainless steel. Double screw housing made of high-quality industrial plastic approved for contact with food. The perfect solution for maximum cost-effectiveness, the HP3 is predestined for the transition from a piston filler to a Vemag vacuum filler. Can handle soft and firm masses. Minimu residual product volumes. Quick and easy cleaning. Perfect hopper infeed geometry for a continuous product flow. Hygienic vacuum ssytem with easily accesible cleaning area. Controls with 7 Touchscreen display and precise servo technology with intelligent control unit. The machine has only: 175 operating hours! Filling output: up to 2.000 kg/h. Portion weight: 0 - 100.000 gra ...
Pot autoclave, make Ascott, type 250E, year of manufacture 2020for the fully automated production of canned goods,, Contents: 250 liters,, Operating pressure: 3 bar,, Connected load: 18.5 kW,, Dimensions: Width: 880 mm, Depth: 1,000 mm, Height: 1,200 mm,, Boiler diameter: 640 mm,, Boiler height: 750 mm,, power: Machine cycle: 15 - 40 seconds, Dimensions / weight: (WxLxH): 820 x 900 x 1070 mm, 227 kg
The GALAN 930 is designed for, but not limited to, processing of high volumes of sturdy, stringy or hard products. Also soft and fragile products can be cut with GALAN 930. With a cutting area of 160 mm (6 1⁄4”) x 360 mm (14 1⁄4”) all common muscles can be cut, and the up to 4 mm (5/32”) thick scimitar blades and the up to 2 mm (5/64”) thick circular blades allow also the processing of very cold, even frozen products. Using different belt, scimitarblade- and circularblade- profiles the machine is adapted to our your production needs., - Fresh cutter for large and productions, - Continuous product supply, - Cutting area 160mm (6 ¼”) x 370mm (14 ½”), - Knife-sets available from 5mm (1/4) to 180 mm (7), - Minimum slicing thickness 4 mm (1/8”), - Down-holder pressure pneumatically adjustable, - Pneumatic belt tensioning, - Very easy to clean due to easy to open covers and ...
All stainless steel meat mincer for flaked frozen meat. One of the best meat Grinders on the market 220 mm Diameter plate One knife, one mince plate set up With end ring support hoist ... mais informação
Linco Flex-cut up line : - Tail cutter - wing tip cutter - Middle wing cutter - wing cutter - pre-cutter - Front half cutter - Breast cap cutter - Saddel splitter - Drum cutter - Chops cutter - unloader More pictures on request ... mais informação
A bacon cutter from Treif is sold Type: Felix Year of construction 2016 incl. 2 pairs of creels of your choice Machine is in good condition and ready for immediate use Price from stock 6800 net ... mais informação