máquinas de processamento de carne e peixe usadas para venda

Lachnit conveyor technology mobile jack for 200 litre meat container, name: EDESTAHL-LIFT-KIPPMASCHINE, Type: 300 S, Serial number: 4561, Year of manufacture: 2017, Cross weight: 900 kg, 400 V, 50 Hz, 3.3 kW, Load capacity weight: 350 kg, Lifting height: 3650 mm, Overall dimensions: 1600 mm x 1100 mm x 3260 mm. 97cfg3mbu Although the tilt height is over 3000 mm, the machine can be retracted, so that you can drive through doors into other rooms with a height of 1950 mm. Lachnit is the only one who does this.

Lachnit conveyor technology mobile jack for 200 litre meat container, name: EDESTAHL-LIFT-KIPPMASCHINE, Type: 300 S, Serial number: 4561, Year of manufacture: 2017, Cross weight: 900 kg, 400 V, 50 Hz, 3.3 kW, Load capacity weight: 350 kg, Lifting height: 3650 mm, Overall dimensions: 1600 mm x 1100 mm x 3260 mm. 97cfg3mbu Although the tilt height is over 3000 mm, the machine can be retracted, so that you can drive through doors into other rooms with a height of 1950 mm. Lachnit is the only one who does this.

POLY CLIP ICA 8700 YEAR 2008 CALIBER UP TO 200 MM  ... mais informação

Make : CFS / GEA MODEL : UNISLICER Y.O.M : 2009 Condition: Good Touch Screen  ... mais informação

Offer a keypad/computer for various Kerres smoke systems. Completely intact - we kept it in reserve during operation!  ... mais informação

Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. filling: 300 kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 Volt Alimex Paddle Mixer M 400 Year of manufacture: 2021 / new machine Volume: 400 liters Max. Loading: 300 Kg Speed: 1 forward speed and 1 reverse speed each Power: 4.4 kW / 400 V

Filling Machine Vemag DP 3, Vacuum Filling Machine, with rotary gear, new DHV (long version) incl. 4 filling tubes complete 14-20mm, Numerous other filling tubes, accessories, operating instructions, 2 sets of rotor blades, Top maintained machine, built in 2013, only 3831 operating hours, Connection 400V, 6kW, dimensions LxWxH approx. 75x88x175cm, weight approx. 445kg, very good used condition, fully functional Price without DHV with filling tubes 17.500,-€

K+G Wetter Cutter 90 liters SM 90 STL Type 261  ... mais informação

Bizerba FW82T/22 Meat Grinder used completely made of stainless steel Smooth running 2.35kW Machine should be thoroughly cleaned before use Video about test run available  ... mais informação

Alexanderwerk W82U5 Meat grinder used completely made of stainless steel Smooth running 1.1kW Machine should be thoroughly cleaned before use H82 5-piece Unger cutting system with coded perforated disc! Video about test run available  ... mais informação

The frame mounted inline Stephan Microcut MCH 20K is suitable for a wide range of applications in the food industry. It combines efficient mixing, fine cutting and emulsifying in one simple operation with minimum space requirement. Typical applications such as: emulstions, dressings, sauces, mayonaisse, ketchup, liquid products and pureed food. Previously used in a processed cheese / vegan cream cheese plant. Rotor - stator principle. Efficient fine grinding. Perfect cut. Homogenous mixing. Stable emulsions. Constant product quality. In the microcut there is no metal-to-metal contact of the cutting elements.Infeed hopper (± 120 liter) with feeding spiral with gear motor for high viscose products and big pieces, who moves the product to the cutting / emulsifiying set. Capacity up to 1.200 kg per hour, depending on product and desired particle size. Motor: 15 kW - 380 V - 27,5 A - 2.925 r ...

Mixing machine, mixing machine, bowl capacity approx. 60 litres, Manufacturer unknown (presumably. Ramon from Spain), Machine completely in stainless steel, bowl freely rotating, Connection 400V, dimensions LxWxH approx. 83x55x116cm, weight approx. 75kg, used, functional  ... mais informação

meat grinder Seydelmann AD114, Machine completely made of stainless steel, with various types of stainless steel. discs and knives, Connection 400V, 14.5kW, dimensions LxWxH approx. 100x90x127cm, weight approx. 500kg, used, functional  ... mais informação

Filling machine Frey Kompakta 2, piston filling machine 30 liters, with casing holding device, accessory, year of construction 2003, Top maintained machine, only 1371 operating hours, turning with new bearings, instruction manual Connection 400V, dimensions LxWxH approx. 80x73x122cm, weight approx. 363kg, very good used condition

Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm ... mais informação

Usable length: approx. 1,000 mm, usable width: approx. 200 mm, stable stainless steel frame, designed to be mobile, total dimensions (LxWxH): approx. 1,050 x 620 x 1,080 mm, new motor, new belt, belt speed: approx. 30m/sec. Length: approx. 1,100 mm, width: approx. 800 mm, height: approx. 1,100 mm = 06/08/20 dh

used for frozen and fresh fish, sorting section with 12 pushers, Capacity: 120 weighings / min. Size of the sorting stations: approx. 400/300/250 mm (LxWxH), Weighing unit consisting of infeed, weighing belt and transport: 300/400/300 x 200 mm, with 12 ejectors installed in a row (stainless steel - compressed air cylinder FESTO).

Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72  ...

FOSS inline fat analysis system, Detection speed: The basic version achieves up to 75 mm / sec and this one up to 150 mm / sec – 9 m / min, Hourly output: up to approx. 830 Meat boxes or blocks / 15,000 kg loose meat, Incl. 3 phantoms for control sample/setting (rich/lean/detector setting), Includes stainless steel cleaning trolley, including conveyor belt, optionally with inclined conveyor belt (surcharge: Euro 15,000.00), Condition: used, very good - 1 year warranty on the X-ray tube, Weight: approx. 1,000 kg, Length x width x height: approx. 2,500 x 1,225 x 2,500 mm, The price includes free delivery, but does not include installation, which must be carried out by Voss., https://www.fossanalytics/de-de/products/meatmaster-ii, power: up to approx. 830 meat boxes / 15,000 kg loose meat, Dimensions / weight: approx. 2500 x 1225 x 2500 mm, approx. 1,000 kg

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...