used AS for sale

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

TRUMPF TruLaser 3030 laser cutting machine was built in 2009 in Germany. The machine designed for cutting workpieces made of steel or aluminium, is ideal for any production facility where precision and the quality of the manufactured parts are the highest priority. The workpieces are machined by an extremely powerful laser beam which, in combination with extensive equipment, allows for rapid cutting of thin sheets with a thickness of up to 1.5 mm. This ensures that the finished workpieces have perfectly smooth and even edges, regardless of the machined material. The offered equipment includes an easy-to-use SIEMENS SINUMERIK 840D CNC controller with 500 MB memory for NC programmes, a table with hydraulic pallet changer and three cutting heads. The TRUMPF TruLaser 3030 Basic Edition laser cutting machine weighs 10500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - max ...

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

DEMAG JC-P 1600 KG pillar jib crane manufactured in 2016 is used in supporting unloading and assembly work, as well as for machine operation in areas with limited space requirements. The compact design with increased stability is equipped with an rotating mechanism controlled by an electric inverter and a highly built-in jib, allowing for particularly high hook heights. All of this makes the DEMAG JC-P 1.6 T pillar crane ensure fast work and high safety in handling workpieces with a maximum weight of 1600 kg. Technical data of DEMAG JC-P 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 5000 mm

ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg

STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

MAZAK SUPER TURBO X510 Hi PRO Supercharged laser cutting machine manufactured in 1999 in Japan, is designed for precision cutting of sheet metal made of structural steel, stainless steel and aluminium. The compact design with high stability makes the machine ideal for small factories as well as for series production. The MAZAK SUPER TURBO-X510 Hi-PRO Supercharged laser cutting machine has a large work table with a length of 3050 mm and a width of 1525 mm on which ball supports are used to facilitate the loading and unloading of workpieces. Workpieces with a maximum thickness of 20 mm are machined with the utmost precision using a stable 2 kW laser beam, guaranteeing excellent machining results. The machine is equipped with, among others, a MAZATROL CNC controller and SiCam 14.10 software for programming the cut shapes and generating the necessary files. The total weight of the machine ...

KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement:  ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

BYSTRONIC ByStar 4020 laser cutting machine was built in 2006 in Switzerland. The machine, designed to cut workpieces made of among others stainless steel and aluminium, uses a laser beam with a power of 4.4 kW and a thickness of just a few μm, which guarantees the highest precision and energy efficiency at low operating costs. Laser cutting of workpieces with a maximum thickness of 25 mm takes place on a stable work table designed to provide unobstructed operator access to the workspace. After machining, the edges of the workpieces are distinguished by their unparalleled smoothness and absence of irregularities. The BYSTRONIC laser cutting machine is offered complete with equipment consisting of among others a BYSTRONIC CNC controller, a dust extraction unit and an EF COOLING cooling unit. The total weight of the machine is 18300 kg. Technical specifications of the BYSTRONIC BySt ...

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

BODOR P3015 fibre laser cutting machine was built in 2020. The machine designed for even the most demanding challenges is equipped with state-of-the-art technology, guaranteeing excellent cutting quality at low operating costs. During the performed process, the robust structure with welded bed frame achieves excellent mechanical properties as well as high stability and rigidity. Sheet metal made of e.g. aluminium, brass and stainless steel is machined by a cutting head with many useful functions. One of these features is Auto Focus, which automatically adjusts the focal position to compensate for errors or failures. Furthermore, the cutting head is able to detect protruding obstacles, which can cause damage and high maintenance costs. The nozzle is changed by the P3015 fibre laser fully automatically in a very short time. The BODOR fiber laser is equipped with the intelligent Bodor ...

TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

STROJARNE PIESOK XZMP 3150/6.3C 3-roll plate rolling machine built in Czechoslovakia in 1983 is designed for pre-bending and rolling sheet metal into cylindrical or conical covers and segments. The machine is distinguished by a fully welded structure with increased rigidity and three high-quality 300 mm diameter rollers with longitudinal grooves for easy alignment of the sheet. The bottom rollers, driven by a high-performance motor with two stages of rotation, allow for vertical repositioning during pre-bending and coiling, and also allow for an offset to an inclined position when the claw couplings are opened. As a result, each of the four lower roll bearings can be freely adjusted in the pitch range. The XZMP plate rolling machine has a control panel with a function to monitor the position of the lower rollers directly on the numerical indicators. The total weight of the STROJARNE  ...

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2014. Distinguished by its robust and stable construction, the machine ensures a high degree of safety, long-term trouble-free operation and excellent precision, even during the most intensive and demanding machining of e.g. steel or aluminium. The machine’s entire workspace with a length of 3000 mm and a width of 1500 mm is equipped with an extraction table, which effectively eliminates contaminants generated during machining and ensures comfortable working conditions. The JANTAR 2 plasma cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller, an ECKERT filter fan and double-sided AC servo motors. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - double-sided AC servo motors - plasma source:  ...

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a selector mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire selector mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance  ...

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

HACO ERMS 36-135 CNC press brake was built in Belgium in 2006. The machine, with its robust construction and high press force of 135 tons, is ideal for even the most demanding machining of workpieces with a length of 3600 mm. To ensure a high level of safety and ease of use, the ERMS 135T CNC press is equipped with the intuitive HACO ATS 560 control and light curtains which prevent unwanted entry of the operator into the working area. The total weight of the press is approximately 88000 kg. Technical data of the HACO ERMS 36-135 press brake - maximum press force: 135 t - maximum sheet metal length: 3600 mm - controller: HACO ATS 560 - bending speed: 10 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - slider stroke: 200 mm - reaction time: 75 ms - distance between body walls: 3150 mm - safety distance: 300 mm - light curtains - foot control - motor power: 15 kW - ...

EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW

ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

HYSTER 5.5 FORTENS forklift built in 2009 is dedicated for fast and safe transportation of loads with a maximum weight of 5500 kg. Thanks to its reliable design characterised by maximum stability and excellent visibility in all directions, the forklift is ideal for even the most demanding challenges inside and outside warehouses. The vehicle’s LPG ignition engine features super-fast glow plugs to ensure fast and reliable engine starting in all conditions. The HYSTER H5.5FT gas forklift weighs 8160 kg Technical specifications of the LPG forklift truck HYSTER 5.5 FORTENS - maximum lifting capacity: 5500 kg - maximum lifting height: 4445 mm - weight centre (5000 kg load): 600 mm - weight centre (4650 kg load): 700 mm - weight centre (3800 kg load): 1000 mm - mast type: triplex - hydraulic accumulator: HYDRA SMOOTH - drive type: gas - vehicle weight: 8160 kg

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

KT7 CNC KRP 150 X 300 SILVER plasma cutting machine built in Poland in 2019, offers its user fast and precise machining of sheet metal weighing up to 4 tonnes. The compact design and all components of the machine have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. For cutting workpieces, the machine uses a fully automatic torch with a special Torch Sensor Control (TSC) system, which prevents damage to a torch during operation. The KT7 CNC plasma cutting machine is also equipped with an integrated control module with SheetCAM CAM software and additional functions to improve the machine’s operation. Technical data of the KT7 CNC KRP 150 X 300 SILVER plasma cutting machine - work table surface (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110-270 mm - polished slats and gears - ball convey ...

ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...

EUROMAC MTX INDEX 1250/30 punching machine was manufactured in Italy in 2008. The machine used for punching in various types of sheet metal, achieves the highest precision and accuracy in machining, thanks to its capacious turret head and high press force of 30 tonnes. The process is performed on a large brush table, which significantly reduces noise level and protects the workpiece surface from scratches and nicks. The EUROMAC 1250 hydraulic punching machine is controlled via a FabriWIN CNC 68 controller with many useful functions. For transport of the machine, tables 4,5,6 are removed and the holding bar is rotated by 90°. Technical specifications of EUROMAC MTX INDEX 1250/30 punching machine - press force: 30 t - feeds in X axis: 1250-2000 mm - feeds in Y axis: 1250 mm - automatic repositioning in the X axis: up to 10000 mm - working speed (cutting, stroke 20 mm): 780 1/min  ...

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

STAR SB-20R type G CNC turning centre was manufactured in 2014 in Japan. The machine is distinguished from other machines of its type by its compact size and a range of features that allow it to perform virtually any type of machining on workpieces with a maximum diameter of 20 mm. The maximally durable and rigid design additionally ensures the incredible stability and rigidity of the process, required to achieve excellent turning precision and quality. Inside the large working area there are two spindles (main spindle and sub-spindle) with C-axis, which are driven by reliable high-power motors. The sub-spindle, in combination with the driven tools, allows completely independent machining after capture. The lathe also features a revolutionary guide sleeve change system, which allows the machine to switch between guide sleeve and no guide sleeve mode. The STAR SB20R type G Swiss-typ ...

STAR SV-38R CNC turning centre built in 2015 in Japan, stands out for its unparalleled flexibility and broad functionality, which makes the machine ideal for complex applications in many industries t.e. automotive or aerospace. With the help of two spindles (main spindle and sub-spindle) with C-axis, the STAR SV 38R CNC lathe performs precision machining of inclined surfaces, including front and back angle holes in up to 11 axes. Both spindles of the machine are driven by reliable, high-power motors, which is used for the versatile use of cutting tools taken from the tool holder or the 10-position turret tool head. A special system for guiding the end of the Z-axis spindle through the headstock also guarantees high rigidity and stability at the cutting point. The STAR SV38R lathe is offered with an extensive range of equipment, including an FMB turbo 5-55 / 3200 A bar feeder, workpie ...

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

C 6250 x 2000 conventional lathe was manufactured in 2010 in China. The machine, characterised by a rigid design with an induction-hardened bed significantly increases the production capacity of any workshop and factories with the utmost precision. The spindle, with adjustable speed from 11 to 1600 rpm is driven by a reliable and high-powered main motor, which is used for versatile tool use. The C 6250×2000 universal lathe with digital readout in three axes weighs 2640 kg. Technical data of the C 6250 x 2000 metal lathe - maximum workpiece length: 2000 mm - turning length in bridge choice: 210 mm - workpiece diameter (turning in bridge choice): 720 mm - workpiece diameter (turning above bed): 500 mm - workpiece diameter (turning over slide): 300 mm - longitudinal feed range: 0.028 – 6.33 mm/rev - transverse feed range: 0.014 – 3.16 mm/rev - maximum spindle speed: 1600 rpm ...

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

KAWASAKI 3CP180L-AC03 palletizing robot manufactured in 2018, increases the productivity of production lines in many industries by automating the process of palletising products. This extremely reliable KAWASAKI CP180L packaging robot is distinguished by its short cycle times, wide movement range and 4 dynamic axes with high axial speeds necessary to quickly move goods with a total weight of 180 kg. Outside the working area of the machine there is a convenient and easy-to-use controller, whose high funcionality allows the robot to be used comprehensively in the production process. The KAWASAKI industrial robot weighs 1600 kg. Technical specifications of the KAWASAKI 3CP180L-AC03 robot - number of axes: 4 - arm reach: 3255 mm - maximum payload: 180 kg - palletising capacity: approx. 1800 cycles/hour - axis movement range JT1 axis: ± 160° JT2 axis: +95° / -46° JT3 axis: +15 ...

DUGARD EAGLE 660 VMC CNC machining centre built in 2007 in Taiwan, is used for precision milling, drilling, threading, boring and reaming of workpieces with rotary tools. The machine, with its extensive machining capabilities, is distinguished by its extremely stable base, which provides rigidity and support for the guideways on which the X,Y,Z axes are guided. To ensure a high level of safety, specially designed sliding guards protect the operator from moving parts, coolant and workpiece fragments. All the processes, from tool selection to the machining cycle, are performed fully automatically by the milling centre. The implemented SIEMENS SINUMERIK 810 D CNC control minimises the operator’s handling of the machine, while the capacious 24-position magazine selects the shortest possible access path to the tool. This solution increases production efficiency while significantly reduci ...

BYSTRONIC BySprint 3015 laser cutting machine manufactured in 2000 in Switzerland for precision sheet metal machining. Technical data of BYSTRONIC BySprint 3015 laser - CNC controller: BYSTRONIC - laser power: 1.8 kW - dust extraction unit: KELLER LUFTTECHNIK - power requirement: 30 kW - power supply: 3x 400 V; 50 Hz - weight of machine BySprint 3015: 600 kg

MACRI ITALIA PROVAR 5-90 U-D tube bending machine, built in Italy in 2010 is used for the fully automatic process of fixed radius and variable radius workpiece bending on two different dies. The machine is characterised by a highly rigid steel structure, modern components and extensive equipment. All 5 axes of the machine (X, Y, Z, B1, B2) are equipped with reliable brushless servomotors in order to provide the user with high dynamics and excellent positioning accuracy when machining tubes and profiles with a maximum length of 5100 mm. The installed state-of-the-art MACRI software allows, among others, to program the positioner force, perform an anti-collision test with 3D simulation, import files from 3D programmes and program the speed of movement of each axis for each bend. The PROVAR 5-90 U-D mandrel bending machine weighs 6000 kg. Technical specifications of the MACRI ITALIA PROV ...