used AS for sale

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

STROJARNE PIESOK XZMP 3150/6.3C 3-roll plate rolling machine built in Czechoslovakia in 1983 is designed for pre-bending and rolling sheet metal into cylindrical or conical covers and segments. The machine is distinguished by a fully welded structure with increased rigidity and three high-quality 300 mm diameter rollers with longitudinal grooves for easy alignment of the sheet. The bottom rollers, driven by a high-performance motor with two stages of rotation, allow for vertical repositioning during pre-bending and coiling, and also allow for an offset to an inclined position when the claw couplings are opened. As a result, each of the four lower roll bearings can be freely adjusted in the pitch range. The XZMP plate rolling machine has a control panel with a function to monitor the position of the lower rollers directly on the numerical indicators. The total weight of the STROJARNE  ...

HACO TS 3006 hydraulic guillotine shears manufactured in Belgium in 2006, are used in manufacturing plants to cut steel sheets with a maximum length of 3100 mm and a thickness of 6 mm. The machine has vertically aligned knives with four cutting edges, which ensure high precision and quality machining of workpieces regardless of the thickness and type of sheet. The angle of the cutting knives and the gap between them are adjusted by means of two levers at the rear of the machine. During machining, the workpiece is pressed against the cam in order to take an accurate measurement on the gauge located between the front stop and the bottom knife. Two parallel hydraulic cylinders drive the cutting bar (the upper knife attached to the slider) to perform the movement in the up-down direction. The HACO guillotine shears are offered with equipment which includes a foot control, a modern HACO SP ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2014. Distinguished by its robust and stable construction, the machine ensures a high degree of safety, long-term trouble-free operation and excellent precision, even during the most intensive and demanding machining of e.g. steel or aluminium. The machine’s entire workspace with a length of 3000 mm and a width of 1500 mm is equipped with an extraction table, which effectively eliminates contaminants generated during machining and ensures comfortable working conditions. The JANTAR 2 plasma cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller, an ECKERT filter fan and double-sided AC servo motors. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - double-sided AC servo motors - plasma source:  ...

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a selector mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire selector mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance  ...

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

HACO ERMS 36-135 CNC press brake was built in Belgium in 2006. The machine, with its robust construction and high press force of 135 tons, is ideal for even the most demanding machining of workpieces with a length of 3600 mm. To ensure a high level of safety and ease of use, the ERMS 135T CNC press is equipped with the intuitive HACO ATS 560 control and light curtains which prevent unwanted entry of the operator into the working area. The total weight of the press is approximately 88000 kg. Technical data of the HACO ERMS 36-135 press brake - maximum press force: 135 t - maximum sheet metal length: 3600 mm - controller: HACO ATS 560 - bending speed: 10 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - slider stroke: 200 mm - reaction time: 75 ms - distance between body walls: 3150 mm - safety distance: 300 mm - light curtains - foot control - motor power: 15 kW - ...

EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW

ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

HYSTER 5.5 FORTENS forklift built in 2009 is dedicated for fast and safe transportation of loads with a maximum weight of 5500 kg. Thanks to its reliable design characterised by maximum stability and excellent visibility in all directions, the forklift is ideal for even the most demanding challenges inside and outside warehouses. The vehicle’s LPG ignition engine features super-fast glow plugs to ensure fast and reliable engine starting in all conditions. The HYSTER H5.5FT gas forklift weighs 8160 kg Technical specifications of the LPG forklift truck HYSTER 5.5 FORTENS - maximum lifting capacity: 5500 kg - maximum lifting height: 4445 mm - weight centre (5000 kg load): 600 mm - weight centre (4650 kg load): 700 mm - weight centre (3800 kg load): 1000 mm - mast type: triplex - hydraulic accumulator: HYDRA SMOOTH - drive type: gas - vehicle weight: 8160 kg

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

KT7 CNC KRP 150 X 300 SILVER plasma cutting machine built in Poland in 2019, offers its user fast and precise machining of sheet metal weighing up to 4 tonnes. The compact design and all components of the machine have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. For cutting workpieces, the machine uses a fully automatic torch with a special Torch Sensor Control (TSC) system, which prevents damage to a torch during operation. The KT7 CNC plasma cutting machine is also equipped with an integrated control module with SheetCAM CAM software and additional functions to improve the machine’s operation. Technical data of the KT7 CNC KRP 150 X 300 SILVER plasma cutting machine - work table surface (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110-270 mm - polished slats and gears - ball convey ...

ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...

EUROMAC MTX INDEX 1250/30 punching machine was manufactured in Italy in 2008. The machine used for punching in various types of sheet metal, achieves the highest precision and accuracy in machining, thanks to its capacious turret head and high press force of 30 tonnes. The process is performed on a large brush table, which significantly reduces noise level and protects the workpiece surface from scratches and nicks. The EUROMAC 1250 hydraulic punching machine is controlled via a FabriWIN CNC 68 controller with many useful functions. For transport of the machine, tables 4,5,6 are removed and the holding bar is rotated by 90°. Technical specifications of EUROMAC MTX INDEX 1250/30 punching machine - press force: 30 t - feeds in X axis: 1250-2000 mm - feeds in Y axis: 1250 mm - automatic repositioning in the X axis: up to 10000 mm - working speed (cutting, stroke 20 mm): 780 1/min  ...

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

STAR SB-20R type G CNC turning centre was manufactured in 2014 in Japan. The machine is distinguished from other machines of its type by its compact size and a range of features that allow it to perform virtually any type of machining on workpieces with a maximum diameter of 20 mm. The maximally durable and rigid design additionally ensures the incredible stability and rigidity of the process, required to achieve excellent turning precision and quality. Inside the large working area there are two spindles (main spindle and sub-spindle) with C-axis, which are driven by reliable high-power motors. The sub-spindle, in combination with the driven tools, allows completely independent machining after capture. The lathe also features a revolutionary guide sleeve change system, which allows the machine to switch between guide sleeve and no guide sleeve mode. The STAR SB20R type G Swiss-typ ...

STAR SV-38R CNC turning centre built in 2015 in Japan, stands out for its unparalleled flexibility and broad functionality, which makes the machine ideal for complex applications in many industries t.e. automotive or aerospace. With the help of two spindles (main spindle and sub-spindle) with C-axis, the STAR SV 38R CNC lathe performs precision machining of inclined surfaces, including front and back angle holes in up to 11 axes. Both spindles of the machine are driven by reliable, high-power motors, which is used for the versatile use of cutting tools taken from the tool holder or the 10-position turret tool head. A special system for guiding the end of the Z-axis spindle through the headstock also guarantees high rigidity and stability at the cutting point. The STAR SV38R lathe is offered with an extensive range of equipment, including an FMB turbo 5-55 / 3200 A bar feeder, workpie ...

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

C 6250 x 2000 conventional lathe was manufactured in 2010 in China. The machine, characterised by a rigid design with an induction-hardened bed significantly increases the production capacity of any workshop and factories with the utmost precision. The spindle, with adjustable speed from 11 to 1600 rpm is driven by a reliable and high-powered main motor, which is used for versatile tool use. The C 6250×2000 universal lathe with digital readout in three axes weighs 2640 kg. Technical data of the C 6250 x 2000 metal lathe - maximum workpiece length: 2000 mm - turning length in bridge choice: 210 mm - workpiece diameter (turning in bridge choice): 720 mm - workpiece diameter (turning above bed): 500 mm - workpiece diameter (turning over slide): 300 mm - longitudinal feed range: 0.028 – 6.33 mm/rev - transverse feed range: 0.014 – 3.16 mm/rev - maximum spindle speed: 1600 rpm ...

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

KAWASAKI 3CP180L-AC03 palletizing robot manufactured in 2018, increases the productivity of production lines in many industries by automating the process of palletising products. This extremely reliable KAWASAKI CP180L packaging robot is distinguished by its short cycle times, wide movement range and 4 dynamic axes with high axial speeds necessary to quickly move goods with a total weight of 180 kg. Outside the working area of the machine there is a convenient and easy-to-use controller, whose high funcionality allows the robot to be used comprehensively in the production process. The KAWASAKI industrial robot weighs 1600 kg. Technical specifications of the KAWASAKI 3CP180L-AC03 robot - number of axes: 4 - arm reach: 3255 mm - maximum payload: 180 kg - palletising capacity: approx. 1800 cycles/hour - axis movement range JT1 axis: ± 160° JT2 axis: +95° / -46° JT3 axis: +15 ...

DUGARD EAGLE 660 VMC CNC machining centre built in 2007 in Taiwan, is used for precision milling, drilling, threading, boring and reaming of workpieces with rotary tools. The machine, with its extensive machining capabilities, is distinguished by its extremely stable base, which provides rigidity and support for the guideways on which the X,Y,Z axes are guided. To ensure a high level of safety, specially designed sliding guards protect the operator from moving parts, coolant and workpiece fragments. All the processes, from tool selection to the machining cycle, are performed fully automatically by the milling centre. The implemented SIEMENS SINUMERIK 810 D CNC control minimises the operator’s handling of the machine, while the capacious 24-position magazine selects the shortest possible access path to the tool. This solution increases production efficiency while significantly reduci ...

BYSTRONIC BySprint 3015 laser cutting machine manufactured in 2000 in Switzerland for precision sheet metal machining. Technical data of BYSTRONIC BySprint 3015 laser - CNC controller: BYSTRONIC - laser power: 1.8 kW - dust extraction unit: KELLER LUFTTECHNIK - power requirement: 30 kW - power supply: 3x 400 V; 50 Hz - weight of machine BySprint 3015: 600 kg

MACRI ITALIA PROVAR 5-90 U-D tube bending machine, built in Italy in 2010 is used for the fully automatic process of fixed radius and variable radius workpiece bending on two different dies. The machine is characterised by a highly rigid steel structure, modern components and extensive equipment. All 5 axes of the machine (X, Y, Z, B1, B2) are equipped with reliable brushless servomotors in order to provide the user with high dynamics and excellent positioning accuracy when machining tubes and profiles with a maximum length of 5100 mm. The installed state-of-the-art MACRI software allows, among others, to program the positioner force, perform an anti-collision test with 3D simulation, import files from 3D programmes and program the speed of movement of each axis for each bend. The PROVAR 5-90 U-D mandrel bending machine weighs 6000 kg. Technical specifications of the MACRI ITALIA PROV ...

GEKA BENDICROP 60 SD ironworker machine was manufactured in 2016 in Spain. Equipped with 5 work stations, the ironworker machine performs precise hole punching, corner cutting, flat bar cutting, as well as bar cutting and bending. The vertical movement of the shears is performed by two adjustable hydraulic cylinders with a central positioned actuator, which guarantees excellent cutting quality throughout the entire life of the machine. The GEKA ironworker machine weights 1750 kg. Technical specifications of the GEKA BENDICROP 60 SD hydraulic ironworker machine General data - maximum press force: 60 t - number of cylinder strokes: 32/min - dimensions (L x W x H): 2010 x 1400 x 2006 mm - weight of machine BENDICROP 60 SD: 1750 kg Hole punching station - maximum bore size (diameter x thickness): ø 40 x 11 mm - throat depth: 500 mm - additional table for hole punching fi 100 ...

ERMAK HAP 2600 X 80 CNC hydraulic press brake was manufactured in 2005 by the Turkish company ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine characterised by high performance and robustness, performs precision bending of workpieces with a maximum length of 2600 mm and a thickness of 6 mm with a force of 80 tonnes. The machining parameters in the X and R axes are programmed easily and conveniently through the CYBELEC DNC 60 CNC controller located on a mobile arm. The HAP 2600-80 press brake also offers a high level of operator safety, thanks to an emergency button and light curtains made by FIESSLER ELEKTRONIK to prevent unauthorised entry into the machine’s working area. The total weight of the press brake is 5600 kg. Technical specifications of the ERMAK HAP 2600 X 80 CNC press brake - press force: 80 t (800 kN) - feed in X/R axis: 500/160 mm - maximum sheet metal length: ...

LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...

FANUC S-420iW industrial robot was manufactured in Japan in 1996. A handling robot characterised by maximum performance and reliability has many applications in the industrial sector. The arm with a long reach of 2850 mm and a load capacity of 155 kg, together with 6 axes equipped with mechanical brakes, will meet even the most demanding challenges. The S-420i W robot has an integrated FANUC R-J2 controller, which uses advanced technology to improve and optimise overall productivity. The total weight of the machine is 1600 kg. Technical specifications of the FANUC S-420iW articulated robot - integrated controller: FANUC R-J2 - number of axes: 6 - arm reach: 2850 mm - payload: 155 kg - portable teach pendant: FANUC - motion range of robot axes J1 axis: 360° J2 axis: 142° J3 axis: 135° J4 axis: 600° J5 axis: 260° J6 axis: 720° - movement speed of robot axes J1 axis:  ...

KOLTECH TUU 1250 CNC above floor wheel lathe was manufactured in Poland in 2007. The wheel lathe is a special-purpose machine designed for the turning process of the running profile of wheelsets used in various types of rail vehicles. The lathe uses high-end components to guarantee efficient and precise machining of both used and new wheelsets for the railway industry. The solidly constructed structure with friction drive allows a wheelset with a maximum weight of 4 tonnes to be fed into and out of the machine from hall level. The TUU1250 machine performs the following operations: – reconditioning of the wheel profile of used wheelsets, – turning of the wheel profiles of new wheelsets, – turning of the clamping ring of the wheelset wheels, – facing of the inner and outer face surfaces of the wheels, – facing of the active surfaces of brake discs, installed on the wheels ...

TOS SN 500S/1500 universal lathe was built by the Czechoslovakian factory TOS Trenčín. The conventional lathe is used for machining rotating parts such as a shaft or disc with a maximum length of 1500 mm, in single unit or small batch production. The machine’s rigid, stable design with a high-power main motor significantly increases production efficiency and allows full utilisation of the tools. The TOS SN500-S lathe for metal performs machining on workpieces with a maximum diameter of 500 mm (turning over bed), 270 mm (turning over support) or 700 mm (turning in bridge). Workpieces machined on the machine are characterised by excellent quality and precision. The total weight of the TOS SN 500 S 1500 lathe is 1895 kg. Technical parameters of the TOS SN 500S/1500 metal lathe - maximum turning length: 1500 mm - turning diameter in the bridge: 700 mm - turning diameter above th ...

MAZAK VTC 20C milling centre was manufactured in 1997 in the UK. The machine designed for precise and dynamic machining of workpieces with a maximum weight of 1000 kg has a high quality steel construction, which ensures rigidity and stability during milling. Inside the milling machine is a large work table with a length of 2000 mm and a width of 510 mm, and a reliable spindle that rotates at a maximum speed of 7000 rpm. The VTC 20 C machining centre processes workpieces in three axes with feeds of 1660 mm (X axis), 510 mm (Y axis) and 510 mm (Z axis). The installed MAZATROL M PLUS CNC control allows full use of all the machine’s capabilities. The VTC 20-C vertical machining centre weighs 7320 kg. Technical data of the MAZAK VTC 20C milling centre - CNC controller: MAZATROL M PLUS - work table dimensions (L x W): 2000 x 510 mm - feed rates in the X/Y/Z axis: 1660/510/510 mm -  ...

EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum wor ...

EAGLE EVISION 1530 F2.0 AF FIBER laser, manufactured in 2013 in Poland with its excellent rigidity and high stability, achieves the highest precision and quality in machining stainless steel, structural steel and aluminium sheets. The EVISION 1530 F2.0 AF laser cutting machine uses a high-quality 2 kW laser beam, which makes laser cutting smooth and trouble-free. The edges of the machined sheet metal are distinguished by their extraordinary smoothness, and the workpieces themselves are free of any irregularities. The large work table with a length of 3000 mm and a width of 1500 mm, together with the state-of-the-art EAGLE CNC control, make the machine capable of handling even the most demanding machining operations. The fibre laser weighs approximately 20 tonnes. Technical specifications of the EAGLE EVISION 1530 F2.0 AF laser - laser beam power: 2 kW (2000 W) - CNC control: EAGLE  ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

FARO EDGE 2.7 M coordinate measuring arm was built in 2014. The efficient and productive portable measuring arm verifies the quality of workpieces of any shape by measuring components in 2D and 3D with an accuracy of ± 0.017 mm. The mounted measuring head and the non-contact laser scanning function also allow for comparative analysis of individual components and assemblies with CAD files. The machine has been designed with convenience and ease of use in mind, as evidenced by the excellent weight distribution and balance maintained. The FARO EDGE measuring machine consists of: – a 2.7 metre long measuring machine with base plate and probe, – battery and cables, – a removable handle, – a non-standard case (hard case). Applications of the FARO EDGE 2.7 M machine - measuring and verifying the dimensions of machine parts of any shape - measurement of shape deviation and c ...

BYSTRONIC BySprint FIBER 6520 fiber laser was manufactured in 2016 in Switzerland. The extremely high-tech machine achieves the highest productivity and precision in cutting thin metal sheets made of among others carbon steel, copper and brass, thanks to the use of innovative fibre optic technology. The workpieces are cut by a specially designed cutting head with an integral capacitive sensor that receives a high-quality beam with a power of 6 kW. The ByPos Fiber function adapts the focal length to the material and production range, resulting in extremely smooth edges without any irregularities. Designed for maximum user comfort, the laser cutting machine design features a large work table of 6500 length and 2000 mm width with micro-welds to support small, long and thin parts. The entire work area also features a special protection system designed to provide the user with a high level ...

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

ZMM C11MB conventional lathe, manufactured in Bulgaria, is used for machining workpieces with a maximum length of 1000 mm and a diameter of 460 mm (turning above bed) or 350 mm (turning above support). The offered C-11MB x 1000 mm universal lathe of indestructible design has been equipped with a 7.5 kW main motor and a high-speed spindle to provide the user with maximum productivity and reliability for many years. Technical data of the ZMM C11MB metal lathe - maximum workpiece diameter (turning above bed): 460 mm - maximum workpiece diameter (turning over support): 350 mm - maximum workpiece length at the tusk: 1000 mm - maximum spindle speed: 2000 rpm - minimum spindle speed: 16 rpm - number of spindle speeds: 18 - spindle passage: 65 mm - motor power of ZMM C-11MB lathe: 7.5 kW

FANUC Arc Mate 100iC robotic welding machine manufactured in 2014, is designed for welding workpieces with even the most complex shapes. The FANUC robotic welding system is equipped with: – robotic arm: FANUC Arc Mate 100iC (2 units) – 3-axis manipulator: PEHh-3-450 – controller: FANUC SYSTEM R-30iB – welding source: LINCOLN ELECTRIC Power Wave S350 (2 units) – light curtains – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500 (2 pcs.) – torch cleaning device: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN ELECTRIC 4R100 (2 pcs.) – wire reel cassette with clamping system (2 pcs.) – operator’s panel – water cooler: LINCOLN ELECTRIC COOLARC-50 (2 pcs.) – control cabinet – attaching fixtures (2 pcs.) – strain relief hanger and cable relief (2 pcs.) – covers with service door and lock with safety switch – platform (2 pcs.) In order to ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...