used AS for sale

Inv. Num. : 6670 Type: MASTURN MT 54 Producer: MAS Created: 2003 Parameters: Control system: Heidenhaim TE 4110 MP Max. turning length: 800 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 310 mm Maximum spindle speed: 3000 1/min Tool head: Duplomatic VDi30 Spindle bore: 80 mm Spindle taper: MORSE 5 Number of tool head positions: 8 Length: 3300 mm Width: 2500 mm Height: 1700 mm Weight: 2600 kg Equipment: Technical Documentation Tool holder Bake

Inv. Num. : 6260 Type: RZ-01 Producer: KOMFI Generated: 2001 Parameters: Equipment: Lower Replacement Pressure Roller Replaceable chrome screen cylinder (small worm pattern) Paper anilox roller (pattern coarse canvas)

Inv. Num. : 6253 Type: GIP 2520 MAN Producer: FARO TRICOORD 3000 Created: 2006 GO2016 Parameters: Software: TOUCH DEMIS Axis X: 5500 mm Axis Y: 2000 mm Axis Z: 2500 mm Table dimensions: 6500 x 4000 mm -: 2 x 8000 kg Equipment: Monitor Keyboard Manual Measuring head Renishaw Accessories Renishaw 2016: complete modernization incl. new measuring system

Inv. Num. : 6248 Type: A 270S-350-60 Producer: Arburg Generated: 2001 Parameters: Operating hours: 47,000 h Clamping force: 35 t Screw diameter: 22 mm Injection capacity: 30 cm³ Injection mass: 27 g Maximum spray pressure: 2340 bar Min. mould height: 175 mm Equipment: Spares Technical documentation The machine has sealed hydraulic blocks. partial replacement of hydraulic hoses Integrated side transducer Integrated sorting flap

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Operating hours: 12800 h Switch-on hours: 6000 h Number of axis: 6 horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Inv. Num. : 6612 Type: Trumatic 500 Producer: Trumpf Created: 1955 Parameters: Operating hours: 69739 h Compressive force: 220 kN Maximum length of the sheet plate: 2500 mm Maximum blade width: 1250 mm Machine weight: 11050 kg 4 cassettes for a single tool and a cassette for a 6-way multitool

Inv. Num. : 5636 Type: LPB-7320 Producer: Tema Generated: 2001 Parameters: Service system: PLC Maximum glass size: 1 7 x 3 0 m Compressed air consumption: 150l/min Space in the oven: 500 mm Rated current: 21 kW Power supply: 380 V/60

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970

Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 2100 kg -with: - ELUMATEC E 355 control system - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - 2 x suction system fixed + moving along - Separate control cabinet  ...

Inv. Num. : 6070 Type: Bysprint Fiber 3015 Producer: Bystronic Created: 2017 Parameters: Laser power: 4 kW Work table length: 3000 mm Work table width: 1500 mm Availability: 1Q/2023

Inv. Num. : 6271 Type: Trumatic L4030 Producer: TRUMPF Generated: 2000 Parameters: Control system: Siemens Sinumerik 840 Laser ON: 89383 BEAM ON: 45361 Laser power: 4 kW Work table length: 4000 mm Work table width: 2000 mm Equipment: 2 x Head

Inv. Num. : 6410 Type: DBS-200RCS Producer: S.A.F. Created: 2012 Parameters: Machine dimensions: 11.5 x 5.15 x 3.86 m The line consists of: - Blasting chamber - Dust collector OP 9 - Blowgun - Exhaust fan - DONALDSON TORIT filter cartridges -Lift - Two-stage abrasive cleaner - Summary conveyor belt - Electric control panel with control panel - Compressor ALMIG BELT 37-8 - Automatic steam trap Bekomat 13 - Compressor BELT 4-37

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade

Inv. Num. : 6021 Type: UKM 2004 DE-PL Producer: MAUTING Created: 2006 Parameters: Number of smoking trolleys: 4 pieces Rated current: 95 kW Size of the smoking trolley: 800x800 mm Doors on both sides Heating is provided by a register for heated water via gas/electric boiler or hot water The smoke generator is equipped with a smoke scrubber Wood chips are used to produce smoke (different varieties possible) The smokehouse is equipped with water and chemical distribution for the rehabilitation of the chamber and the periphery

Inv. Num. : 6345 Type: WHN 13.4.C Producer: TOS Produced: 1988 Parameters: Control system: MEFI CNC 836 Work table length: 2200 mm Work table width: 1800 mm Spindle drive power: 37 kW Maximum spindle speed: 2800 1/min Travel X-axis: 2000 mm Travel Y-axis: 1600 mm Travel Z-axis: 1200 mm Machine weight: 32.000 kg Replaced ball screw. Measurement of each ESSA axis separately. Drive for each XYZ axis.

Inv. Num. : 6331 Type: M918 Techno Producer: VICIVISION Generated: 2019 Parameters: Measuring range: 900x180 mm dimension of the part: 925x240 mm weight of the part: 60 kg Width: 920 mm Depth: 1030 mm Height: 2000 mm Weight: 431 kg

Inv. Num. : 6295 Type: HX-360-W3/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg

Inv. Num. : 6296 Type: HX-360-W2/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg

Inv. Num. : 6294 Type: 2-50 Producer: OmniTrac Generated: 2018 Parameters: Linear range (diameter): 50 (100) m Minimum measuring distance: 0 mm Machine height: 430 mm Machine length: 198 mm Machine width: 198 mm Machine weight: 10.9 kg

Inv. Num. : 6291 Type: MF630/15C Producer: Quaser Generated: 2017 Parameters: Control system: Heidenhain iTNC 640 Number of synchronized axes: 5pcs Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 15000 1/min Travel X-axis: 800 mm Travel Y-axis: 700 mm Travel Z-axis: 610 mm Maximum tool weight: 300 kg Machine height: 2530 mm Machine length: 3710 mm Machine width: 3230 mm Machine weight: 9050 kg Equipment: Workpiece probe Renishaw Jigs Axis X Y Z C A Tools

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.

Inv. Num. : 6074 Type: GR-2300-900-WWB Producer: GRINDINGMASTER Created: 2002 Parameters: Sanding belt length: 1900 mm Sanding belt width: 930 mm Cutting thickness: 1-150 mm Rated current: 44 kW Weight: 2350 kg Machine dimensions: 2700 x 2000 x 2000 mm

Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg

Inv. Num: 5422 Type: ML3015eX PLUS Producer: Mitsubishi Generated: 2017 Parameters: Control system: MITSUBISHI M 700 Engine hours: 21480 h Spindle hours: 1480 h Laser power: 4.5 kW Maximum table load (even): 930 kg Feed length X-axis: 3100 mm Feed length Y-axis: 1565 mm Feed length Z-axis: 150 mm Machine length: 10210 mm Machine width: 3130 mm Machine Weight: 10700 kg

Catalog No. : 5750 Type: MCFV 1060 Producer: TAJMAC Made in: 2005 Characteristic: Control system: Fanuc Series 18i-MB5 Length of the working table: 1270 mm Width of the working table: 590 mm Maximum table load (evenly distributed): 1350 kg Maximum rotary speed of the spindle: 12000 1/min X-Axis travels: 1016 mm Y-Axis travels: 610 mm Z-Axis travels: 760 mm Equipment: Rotary table Internal cooling 4th axis Workpiece probe MP12 2022: New spindle Chip conveyor High pressure pump Ball bar 2021: X and Y axis laser compensation 2022: GO spindle - new ball screw on X and Y axis - replacement of the rod for holding tools - new bearings - geometry

Inv. Num. : 5461 Type: PMM 12 10 6 Producer: Leitz Created: 1999 Parameters: Axes X/Y/Z: 1200/1000/600 mm Maximum table load: 1200 kg Machine height: 3800 mm Machine length: 3500 mm Machine width: 2400 cm Machine weight: 6 t equipment: Technical documentation Automatic change of the measuring keyboard (7 positions - including various touches)

Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg

Inv. Num. : 5479 Type: PC W 200 HA Producer: ŠKODA Created: 1987 Parameters: Spindle drive power: 77 kW Minimum spindle speed: 0.8 1/min Maximum spindle speed: 630 1/min Mechanical feed length axis X: 4000 mm Maximum feed speed axis X: 4000 mm/min Maximum feed speed axis Y: 4000 mm/min Maximum feed speed axis Z: 4000 mm/min Cone: ISO 60 Spindle diameter: 200 mm Maximum turning-out depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Ride of the stand on the bed: 5000 mm

Pass width mm: 1300 02 Engines KW: 1 + 1 02 Brushes Brush diameter mm: 300 Vacuum table Control cabinet KW: 8.5

Control system: TRUMPF Power on: 35071 h Cutting time: 14638 h Laser power: 3 kW Table dimensions: 3000 x 1500 mm Travel distances: X: 3000 mm Y: 1500 mm Z: 115 mm Max. Thickness of material Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg

Largest workpiece height: 630 mm Largest workpiece diameter: 800 mm Largest workpiece weight: 2000 kg Engine power: 40 kW Dimensions: 2600x2500x3700 mm Machine Weight: 10000 Kg Electrical table voltage Electrical rotation of the knife head Shaped copy via template Two-axis measurement Ball screw Suitable for CNC conversion Accessories: Clamping pressure gauges Tools

Laser sensor Error detection automatically Shape recognition Laser printer (DIN A4) Number 2 Monochrome cameras PHOTONFOCUS 160 MB Number 2 Barriers + Accessories

With the help of our rental machines, you can bridge the time periods during which there is an increased demand for compressed air. This is useful, for example, in the event of unexpected peaks in demand or the failure of one of your own compressors. The usual high BOGE quality standards also apply to our used rental machines – in addition to various compressors, a wide range of high-performance compressed air components is available for you. Before renting, all machines are carefully reworked and tested – we give you a guarantee for this. Visit the BOGE compressors Used Machinery Shop

BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...

As good as new Scoll compressor TECHNICAL DETAILS Power supply: 400 V / 50 Hz / 3 Ph Flow rate: 1780 litres/min Power: 15 kW Pressure: 8.0 bar[g] Nominal power: 2 x 7.5 kW Sound level: 65 dB(A) MACHINE DETAILS Length: 1400 mm - Width: 920 mm - Height: 1020 mm Machine weight: 485 kg Compressor 1: 6 operating hours Compressor 2: 5 operating hours Functionally tested, without warranty

New airend BOGE BA 30 as a replacement for Termomeccanoca SCA10D (TM SCA 10 D) The installation dimensions are the same. BOGE Id.Nr.: 201021766P ( incl. gasket DN 60x D110x 2 and O-Ring-90x3-N-FKM (Viton) 75)

New airend BOGE BA 15 as a replacement for Termomeccanoca SCA8D-R (TM SCA 8 D-R) The installation dimensions are the same. BOGE Id.Nr.: 201021166P ( incl. gasket 60 x 60 x 2 and O-Ring-76x3-N-FKM (Viton) 75)

New devices that are no longer needed Product information "Eaton Undervoltage Release, 208-240VAC 259499" The Eaton Low Voltage Release, 208-240VAC 259499, is an optional accessory that offers an extensive portfolio of applications for worldwide use. Its installation is flexible and easy thanks to modular functional groups. The use of the undervoltage release enables an immediate shutdown of the circuit breaker NZM, or switch-disconnector N when the control voltage drops below 35-70% US. The undervoltage release, when de-energized, prevents the main switch contacts from touching during switch-on attempts, which ensures high safety. The undervoltage release is not at the same time as leading auxiliary switch NZM. -XHIV.. or working current release NZM.. -XA.. can be installed. It is suitable for circuit breakers and load switches. The rated control supply voltage Us at AC 50 Hz is  ...

Stock No.: 503455 Machine/ Device Type: Suction Conveyor Manufacturer: PIOVAN Type: C10L Easy 2 Year of Make: 2001 - Suction conveyor C10l A016 Easy 2 with - Side compressor F42 (0.85m x 0.56m x 0.40m)

Plastic edge protectors Length: 79 mm, leg length: 22 x 22 mm, for strap width 36 mm Price 59,00 per 1000 pieces Also available in partial quantities!

The Junior 4.4 air cushion machine is a new, reliable, easy-to-use machine. This machine is designed to make air cushions made of "Bio Green" film in various dimensions to produce. The "Bio Green" films made of HDPE with DPA additives will be available in 12 – 24 months under Exposure to UV rays, moisture and bacteria degradable (ASTM D6954-04 certificate) and therefore very environmentally friendly. 1 table model Air-O-Pack Junior 4.4 Power: 8 – 15 m/min Setting options: adjustable chain length, temperature, speed, air volume Digital display and control unit Digital storage for air volume and temperature Fast film change Low noise max 60 dB Electrics 220/110 V, motor 120 W Warranty 6 months, excluding wearing parts Options at an extra cost Mobile chassis MS-01 € 270,-- mobile storage basket MB-02 € 270,-- Foot pedal € 60,-- Sensor control € 60,-- ...

for crushing fruit and vegetable tins made of plastic and cardboard, Packing material dimensions max W 450 x max H 450 mm L unlimited with 1 discharge conveyor belt, B=500 mm with 1 big-bag holding device with extractor belt

Offered are sturdy wooden boxes with loose lids (1 x used) in top condition as export packaging or for storage. with runners for movement with a pallet truck, forklift, etc. Dimensions: width 80 cm, length 107 cm, height 60 cm In stock: 14 pieces Only pick-up possible

Pad printing machine Pad printing is an indirect printing process based on the gravure printing principle. It is particularly suitable for printing on plastic and metal objects and can also be used when the printing area is uneven. The eponymous silicone tampon transfers the color to the print area Little-used machine with accessories

SK40 Spindle with 10,000 rpm High-pressure cooling through the spindle Lehmann rotary axis (4th axis) can be viewed under span, bearing of the X-axis makes slight noise, but has no dimensional fluctuation

WEINIG Unimat 500 – 5 spindles • Planing width max. 230 mm • Planing height max. 120 mm • Feed electronically frequency-controlled 5-30 m/min. • Feed motor 4 KW • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 11 KW • 3rd spindle on the left with electr. Axle adjustment FORWARD – BACK • 4th spindle top 7.5 KW with electr. Axis adjustment HIGH-LOW • 5th spindle bottom 5.5 KW • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatic, high-low controlled • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Driven rubber roller in the run-out table • Electronic digital displays on 1/100 mm • Manual lubricant pump • Central positions of the lubrication points • GR ...

CAPASITY 60 T

We have for sale a very good conditioned A1 with very low working hours. Tetra Pak® A1 for Tetra Classic® Aseptic (TCA) is a filling machine for aseptic packaging of liquid food. Tetra Pak® A1 for TCA puts aseptic packaging technology at your disposal, enabling you to produce the Tetra Classic® Aseptic package. Tetra Pak® A1 For TCA 150S Used Aseptic Filling Machine Make: Tetra Pak® Model: TCA A1 150 ml Slimline Area of use: juice, milk, water, tea, wine, other liquids Working hours: 2218 Year of manufacture: 2004 Capacity: approx. 10000 p/h Condition: very used good condition Tetra Straw Applicator 1 Make: Tetra Pak® Year of manufacture: 2005 Working hours: 2110 Tetra Pak® 10 m Conveyors

Sandvik 18/60-2 screening machine Brand: Sandvik Type: XS 108 master-flo Screen area : 6000 x 1800 mm – 2 deckers Drive: 18.5 kW electric motor