used AS for sale

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

HAAS MINI MILL HE CNC machining center built in the USA in 2001 is distinguished by its incredible milling precision and accuracy, making it ideal for a wide range of applications in any production facility. Made from the highest quality raw materials, the stable, compact design with sliding doors effectively dampens the vibrations generated during machining and provides easy access to the work space. The work space is equipped with a T-slot table, a reliable high-speed spindle and a 10-position tool magazine. To minimise the need for the operator to operate the machine, all machining parameters are programmed in the intuitive HAAS CNC control, which fully automatically executes the machining cycles. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC control: HAAS - work table surface area (L x W): 914 x 305 mm ...

HAAS MINI MILL HE CNC vertical milling center was built in 2006 in the United States. This compact machine, with its emphasis on high productivity and precision milling, is ideal for any production facility, even during the most intensive challenges. Behind the sliding doors there is a large work space equipped with a T-slot table, a 10-position tool magazine and a reliable high-speed spindle. Machining programmes are created in just a few steps in the intuitive HAAS CNC controller, which performs cycles fully automatically and minimises the operator’s need to operate the machine. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC controller: HAAS - feed rates in the X/Y/Z axis: 406/305/254 mm - work table surface (L x W): 914 x 305 mm - maximum workpiece weight: 227 kg - maximum spindle rotational speed: 600 ...

WJATECH WJA D096P A MA screen printing conveyor dryer built in Poland in 2020 is dedicated to the advertising industry, where efficient drying of prints on fabrics or textiles is required. Fast achievement of the right temperature and a conveyor belt with a large working space make the WJATECH screen printing dryer the best solution in this field. Technical specifications of the WJATECH WJA D096P A MA screen printing conveyor dryer - HMI panel: WEINTEK - main switch - power: 64 kW - working pressure: 6 bar - power supply: 3×400 VAC; 50 Hz - dimensions (L x W x H): 4500 x 2200 x 1700 mm - weight of machine: 900 kg

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

HAAS VF-1 CNC vertical machining center built in 2014 in the United States is distinguished by its excellent milling precision and accuracy, making it able to stand up to even the most intensive production requirements. This highly efficient and reliable machine features a robust, steel design with compact dimensions that effectively dampens any vibrations and ensures maximum stability of the machining process. Behind the sliding door, there is a large work area with a T-slot table, a 20-position tool magazine and a powerful spindle. All tools taken from the magazine are continuously measured by a measuring probe to prevent damage or tool breakage. The HAAS VF1 vertical milling center is also equipped with an intuitive HAAS CNC control that allows the creation of machining programmes in just a few steps. The VF-1 CNC machining center weighs 3539 kg. Technical specifications of the  ...

DOOSAN LYNX 2100 LMA CNC turning center was manufactured in 2021 in South Korea. The machine offers best-in-class turning performance and precision, thanks to a wide design, a highly stable bed, a low-vibration spindle and a full guide guard that protects against coolant leaks and chips from entering into the machine. All this makes the DOOSAN LYNX 2100LMA CNC lathe ideal for any industrial facility where quality and precision are top priorities. The used spindle is driven by a reliable electric motor with high power, which is used for the versatile use of tools taken from the 12-position headstock. The turret, on the other hand, is controlled by a powerful servomotor which guarantees fast and accurate tool selection. All machining parameters are programmed in the intuitive DOOSAN FANUC i Series CNC control with many useful features, whose excellent optimisation allows maximising mach ...

METALPRES KM4E folding machine was built in 1980. Distinguished by its stable, robust construction, the machine designed to fold various types of sheet metal with a maximum length of 2 metres offers excellent quality and precision of machining. The applied manual control together with the angle setting allows the machine to be adapted to the individual needs of the user. In 2023, the METALPRES hydraulic folding machine underwent a general overhaul worth around 14000 PLN net, during which the clutch, sleeves, electrical installation including the cabinet were replaced and the knives were sharpened. Technical data of the folding machine METALPRES KM4E - maximum sheet metal length: 2000 mm - maximum sheet thickness (black steel): 5 mm - maximum sheet thickness (stainless steel): 4 mm - technical documentation - dimensions of the machine (L x W x H): 2600 x 1200 x 1700 mm

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

STEP-MET NCW 1250 X 1.5 slitting line built in Poland in 2011, is used in the process of slitting thin steel sheets with a maximum thickness of 1.5 mm into equal-sized stripes. The material is slit longitudinally by high-quality cutting rollers, which guarantee the highest product quality while making optimum use of the raw material. The NCW 1250 X 1.5 slitting line consists of several modules, including, among others, an easy-to-operate control cabinet that allows adjustment of the operating speed and cutting width. The STEP-MET slitting line consists of the following components: – sheet metal decoiler – sheet metal winder – control cabinet Technical data of the STEP-MET NCW 1250 X 1.5 slitting line - maximum sheet metal thickness: 1.5 mm - maximum sheet metal width: 1250 mm - minimum sheet metal width: 25 mm - maximum sheet metal coil weight: 6 t - cutting speed ran ...

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

DMG GILDEMEISTER CTX 310 CNC turning center was manufactured in 2002. The machine with its small size and extensive equipment can fully automate the machining process of workpieces with a maximum diameter of 390 mm while maintaining high precision and reduced operating costs. The GILDEMEISTER CTX 310 CNC lathe is equipped with a 12-position tool head, an easy-to-use SIEMENS SINUMERIK 840 D CNC controller and a reliable powerful spindle rotating at a maximum speed of 5000 rpm. The total weight of the machine is 3400 kg. Technical specifications of the DMG GILDEMEISTER CTX 310 lathe - CNC controller: SIEMENS SINUMERIK 840 D - turning diameter (in tusk): 390 mm - turning diameter (over bed): 310 mm - minimum turning diameter: 8 mm - maximum spindle rotational speed: 5000 rpm - spindle passage diameter: 50 mm - 12-position tool head - tool holder: VDI 30 - operating hours: 35979 ...

EXERON DIGMA HSC 300 CNC vertical machining center built in 2006 in Germany is a highly reliable machine that can cope with machining even the hardest materials. To achieve this, the compact design including the bed was made of top-quality mineral casting, which effectively dampens any vibrations and ensures optimum dynamics and high precision in the machining process. The EXERON milling center is offered with an intuitive HEIDENHAIN CNC controller, digital axis drives and the REGO-FIX rotary tool clamping system. The total weight of the machine is approximately 5000 kg. Technical specifications of the EXERON DIGMA HSC 300 CNC milling machine - feed rates in the X/Y/Z axes: 300/300/300 mm - rapid traverse: 20 m/min - feed rate range: 2-40000 mm/min - portal travel lateral: 570 mm - portal travel upwards (from spindle end): 360 mm - drive torque: 17 Nm - air pressure: 7 bar - p ...

VINDEX OW-1 stretch wrapping machine is used in many industries to wrap high and heavy loads with stretch film. After selecting the appropriate button on the control cabinet, the process is fully automatic, reducing the time required for wrapping and increasing productivity at the same time. Distinguished by its robust and stable design, the VINDEX automatic pallet wrapping machine has run for a small amount of time during testing and is ready to be implemented in the storage process. Technical specifications of the VINDEX OW-1 pallet wrapping machine - maximum load height: 2100 mm - maximum pallet weight: 2500 kg - maximum pallet dimensions (L x W): 1200 x 800 mm - power supply: 1-phase

DECKEL MAHO DMC 50 V CNC machining center was built in Germany in 1995. The machine distinguished by its robust, stable construction is used in precision face and hole machining using rotary tools. The machine is ideal for use in any production facility thanks to its reliable components, such as the high-performance FRANZ KESSLER DMS100.AL.4.FOM spindle and the 20-position tool magazine with automatic tool changing, which guarantee perfect milling precision and accuracy. The DECKEL MAHO CNC vertical machining center weighs 7000 kg. Technical specifications of the DECKEL MAHO DMC 50 V CNC milling machine - work table dimensions (L x W): 700 x 400 mm - feed rates in the X/Y/Z axis: 500/420/500 mm - speed of feeds in the X/Y/Z axis: 1-2000 mm/min - feed motor power in the X/Y/Z axis: 3.5 kW - maximum workpiece weight: 800 kg - maximum spindle rotational speed: 15000 rpm - maximum  ...

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials  ...

MAAD HSSM 1550/1.5 folding machine which was built in Poland in 2017, is designed for folding thin steel sheets with a maximum thickness of 1.5 mm along a straight line at a specific angle. This functional machine, based on an innovative design, guarantees comfortable operation and a wide range of applications, which makes it ideal for many different industries. The MAAD segment folding machine has a clamping bar and a bending bar equipped with interchangeable segment knives of different lengths. Mounted on inbus screws, the segments are made of the highest quality steel, which ensures long-lasting operation of the machine while maintaining excellent bending parameters. After pressing a button on the control panel, the HSSM 1500/1.5 electric segment bending machine operates in automatic mode. The bending bar moves to the set angle and then returns to its initial position. The total we ...

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

TRUMPF TruLaser 3030 laser cutting machine built in Germany in 2007 provides excellent laser cutting quality while maintaining low operating costs. Designed for even the most demanding challenges, the machine machines workpieces with a maximum thickness of 12 mm with high precision and quality, making it suitable for any production facility. The stable 2 kW laser beam used during cutting produces very smooth and even edges along the entire length of the workpiece, regardless of the type of material. To further improve the workflow and reduce machine downtime to a minimum, the work table is equipped with an integrated automatic pallet changing system which allows workpieces to be loaded and unloaded simultaneously during the cutting process. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - laser power: 2 kW (2 ...

TRUMPF TruLaser 3030 laser manufactured in 2007 in Germany, is the best choice for any production facility. This reliable and highly efficient machine provides excellent laser cutting quality while maintaining low operating costs, thanks to the use of a reliable laser source with the highest energy efficiency. The stable 2 kW laser beam makes the workpiece edges extremely smooth and even after machining. Machining is performed on a high-quality work table with an integrated automatic pallet changing system. This system allows simultaneous loading and unloading of workpieces during the cutting process, resulting in increased production efficiency and significantly reduced machine downtime. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - laser power: 2 kW (2000 W) - feed rate in the X/Y/Z axis: 3104/ ...

NAKAMURA-TOME SUPER NTM3 CNC turning centre was manufactured in 2004 in Japan. Distinguished by its wide machining capabilities and extensive equipment, the machine allows fully automated production processes, while maintaining high precision and reduced operating costs. The high-quality construction additionally effectively dampens any vibrations and ensures maximum process stability, which results in excellent turning results. Workpieces are machined in up to 11 axes using reliable tools stored in three 24-position tool heads. The NAKAMURA SUPER NTM3 CNC lathe is offered with an extensive range of equipment including a BREUNING IRCO SiMag bar feeder, a FANUC 16i-TB CNC controller and additional toolholders. The CNC dual-spindle lathe weighs 12000 kg. Technical specifications of the NAKAMURA-TOME SUPER NTM3 CNC lathe - number of axes: 11 - CNC control: FANUC 16i-TB - number of  ...

EAGLE eVision 1530 F4.0 4kW fiber laser built in 2016 in Poland, is designed for machining sheet metal made of among others stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDSON TORIT DCE multi-chamber extraction system. The total weight of the machine is approximately 18000 kg. Technical specifications of the EAGLE eVision 1530 F4.0 laser cutting machine - laser power:  ...

FEHLMANN PICOMAX 55 CNC 2/3 CNC machining center was built in 2007 in Switzerland. Designed for high-precision machining of workpieces, the PICOMAX 55 CNC 2/3 CNC vertical milling center is offered with an intuitive HEIDENHAIN CNC controller and complete tooling for an SK 32 tool holder. The total weight of the machine is 2450 kg. Technical data of the FEHLMANN PICOMAX 55 CNC 2/3 CNC milling machine - CNC control: HEIDENHAIN CONTROL 530i - T-slot table - tool holder: SK 32 - complete tooling for an SK 32 tool holder - number of T-slots: 5 - operating hours: 50000 h - power: 16 kVA - power supply: 3x 400 V; 50 Hz - weight of machine: 2450 kg

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

TRUMPF TruLaser 3030 laser cutting machine was built in 2009 in Germany. The machine designed for cutting workpieces made of steel or aluminium, is ideal for any production facility where precision and the quality of the manufactured parts are the highest priority. The workpieces are machined by an extremely powerful laser beam which, in combination with extensive equipment, allows for rapid cutting of thin sheets with a thickness of up to 1.5 mm. This ensures that the finished workpieces have perfectly smooth and even edges, regardless of the machined material. The offered equipment includes an easy-to-use SIEMENS SINUMERIK 840D CNC controller with 500 MB memory for NC programmes, a table with hydraulic pallet changer and three cutting heads. The TRUMPF TruLaser 3030 Basic Edition laser cutting machine weighs 10500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - max ...

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

DEMAG JC-P 1600 KG pillar jib crane manufactured in 2016 is used in supporting unloading and assembly work, as well as for machine operation in areas with limited space requirements. The compact design with increased stability is equipped with an rotating mechanism controlled by an electric inverter and a highly built-in jib, allowing for particularly high hook heights. All of this makes the DEMAG JC-P 1.6 T pillar crane ensure fast work and high safety in handling workpieces with a maximum weight of 1600 kg. Technical data of DEMAG JC-P 1600 KG pillar jib crane - maximum lifting capacity: 1600 kg - arm length: 5000 mm

ATLAS COPCO FX 7 refrigeration dryer was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous for pipes and pneumatic tools. The ATLAS COPCO compressed air dryer is distinguished by its capacity of 3000 l/min, low compressed air consumption and a pressure dew point of +3°C, guaranteeing clean and dry air throughout its service life. The total weight of the device is 44 kg. Technical parameters of the ATLAS COPCO FX 7 refrigeration dryer - working pressure: 13 bar - pressure dew point: 3°C - capacity: 3000 l/min - pressure drop: 0.38 bar - connection: 1″ - maximum ambient temperature: 43°C - power: 1 kW - power supply: 230 V; 50 Hz - dimensions (L x W x H): 500 x 370 x 804 mm - weight of device: 44 kg

STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

MAZAK SUPER TURBO X510 Hi PRO Supercharged laser cutting machine manufactured in 1999 in Japan, is designed for precision cutting of sheet metal made of structural steel, stainless steel and aluminium. The compact design with high stability makes the machine ideal for small factories as well as for series production. The MAZAK SUPER TURBO-X510 Hi-PRO Supercharged laser cutting machine has a large work table with a length of 3050 mm and a width of 1525 mm on which ball supports are used to facilitate the loading and unloading of workpieces. Workpieces with a maximum thickness of 20 mm are machined with the utmost precision using a stable 2 kW laser beam, guaranteeing excellent machining results. The machine is equipped with, among others, a MAZATROL CNC controller and SiCam 14.10 software for programming the cut shapes and generating the necessary files. The total weight of the machine ...

KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement:  ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

BYSTRONIC ByStar 4020 laser cutting machine was built in 2006 in Switzerland. The machine, designed to cut workpieces made of among others stainless steel and aluminium, uses a laser beam with a power of 4.4 kW and a thickness of just a few μm, which guarantees the highest precision and energy efficiency at low operating costs. Laser cutting of workpieces with a maximum thickness of 25 mm takes place on a stable work table designed to provide unobstructed operator access to the workspace. After machining, the edges of the workpieces are distinguished by their unparalleled smoothness and absence of irregularities. The BYSTRONIC laser cutting machine is offered complete with equipment consisting of among others a BYSTRONIC CNC controller, a dust extraction unit and an EF COOLING cooling unit. The total weight of the machine is 18300 kg. Technical specifications of the BYSTRONIC BySt ...

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

BODOR P3015 fibre laser cutting machine was built in 2020. The machine designed for even the most demanding challenges is equipped with state-of-the-art technology, guaranteeing excellent cutting quality at low operating costs. During the performed process, the robust structure with welded bed frame achieves excellent mechanical properties as well as high stability and rigidity. Sheet metal made of e.g. aluminium, brass and stainless steel is machined by a cutting head with many useful functions. One of these features is Auto Focus, which automatically adjusts the focal position to compensate for errors or failures. Furthermore, the cutting head is able to detect protruding obstacles, which can cause damage and high maintenance costs. The nozzle is changed by the P3015 fibre laser fully automatically in a very short time. The BODOR fiber laser is equipped with the intelligent Bodor ...

TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...