used AS for sale

PRASMATIC MSW 300 C packaging machine was built in Italy in 2012. The packaging machine is used for the automatic shrink-wrapping of products such as bottles or cans in packs of 6-9 pieces. High production efficiency is ensured by the use of state-of-the-art technology to optimise the packaging cycle, such as the cold film cutting system via a rotating blade and the unwinding and winding speed control function via brushless motors to correctly feed the film. The shrink wrapping machine has very low mileage – it was used for only two months of the year. Technical specifications of the PRASMATIC MSW 300C packaging machine - packaging speed: 35 packs/min - average size changeover time: 10 – 25 min - maximum reel diameter: 500 mm - maximum reel width: 680 mm - maximum reel weight: 80 kg - brushless motors - control panel with touch screen - rated current: 65 A - power supp ...

RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz

ENGEL ES 200/75 HL-V injection moulding machine was built in Austria in 2000. The highly reliable and robust machine is designed for processing plastics by injection moulding. The high-end components installed on the ENGEL ES 200/75 HL V injection moulding machine guarantee a significant increase in work efficiency and productivity. The machine operating with a force of 75 tonnes works with injection moulds of a minimum height of 200 mm, which are placed on 660 x 560 mm platens. All process parameters are programmed and controlled on the convenient and intuitive ENGEL CNC control, located on the body of the plastics processing machine. The total weight of the machine is 4700 kg. Technical specifications of the ENGEL ES 200/75 HL-V injection moulding machine - CNC control: ENGEL - clamping force: 75 t - injection volume: 135 cm3 - injection pressure: 1065 bar - injection speed: ...

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...

IRAC SR MINI EVOLUTION printing screen washing machine was built in Italy in 2017. The machine is used in the process of semi-automatic cleaning of printing screens using room temperature solvents. The offer includes: – printing screen washing machine: IRAC SR MINI EVOLUTION 1000X1000 LST (2017). – solvent distiller with air tank: IRAC ALPHA 50/R (2017) The SR MINI EVOLUTION screen washing machine is equipped with a fully programmable pneumatic control system, allowing easy management and optimisation of the machine’s working phases. Directly directed nozzles deeply clean the entire surface of the printing screen, which is then rinsed and blown off. A high level of safety in the use of the printing screen washing machine is ensured by the fully hermetic design, guaranteeing no emission of harmful fumes. The ALPHA 50/R solvent distiller is an economical and environmentall ...

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

AMADA HFE 170-3 L CNC press brake was built in France in 2000. The machine designed for bending workpieces with a maximum length of 3100 mm, has seven numerically controlled axes (Y1, Y2, X1, X2, R, Z1, Z2) and 170 tonnes of press force. This allows for very high machining accuracy and, thanks to the deflection arrow compensation function, the desired angle is present along the entire length of the bent sheet. All machining parameters are programmed on the intuitive and easy-to-use AMADA CNC control located on the arm. The press was used for 15656 hours (5.5 years of operation at 8 hours per day). The total weight of the press brake is 12400 kg. Technical data of the AMADA HFE 170-3 L press brake - CNC controller: AMADA - maximum press force: 170 t (1700 kN) - number of numerically controlled axes: 7 (Y1, Y2, X1, X2, R, Z1, Z2) - maximum workpiece length: 3100 mm - deflection  ...

FRECH DAK315H die casting machine manufactured in 1991 by the German company Oskar Frech Werkzeugbau GmbH + CO. KG. is designed for the production of castings by filling moulds with molten brass or aluminium. The reliable FRECH metal injection moulding machine with high-quality components works with casting moulds of a maximum height of 700 mm, which are closed with a force of up to 315 tonnes after being filled with molten material. Depending on the design of the choiceed mould, the aluminium die casting machine also allows for the use of an injection piston with a diameter of 40 to 80 mm. Previously, the machine used a piston with a diameter of 40 mm. The DAK315H aluminium die casting machine weighs approximately 14000 kg. Technical parameters of the FRECH DAK315H metal injection moulding machine - clamping force: 315 t (3150 kN) - injection force: 35 t (350 kN) - ejection for ...

SULAK BTS 01 ALPHA glass beveling machine was manufactured in 2014 in the Czech Republic. The easy-to-use glass grinding machine is designed for levelling and grinding flat or rounded edges of, among others, glass and mirrors. The machining of workpieces with a thickness of 3 to 12 mm is performed with water cooled diamond discs and polishing discs. Depending on the design of the diamond disc, the processed glass edges can have a trapezoidal profile, a flat profile or a C profile. The total weight of the machine is 280 kg. Technical data of the SULAK BTS 01 ALPHA glass edging machine - minimum glass size (L x W): 200 x 200 mm - maximum glass thickness: 12 mm - minimum glass thickness: 3 mm - spindle speed: 2800 rpm - number of spindles: 1 - power supply: 3x 400 V; 50 Hz - power: 1.6 kW - dimensions (L x W x H): 3060 x 750 x 1700 mm - BTS 01 ALPHA machine weight: 280 kg

VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...

RUIAN KODA MACHINERY pneumatic press was manufactured in 2020 in China. Operating with a maximum press force of 3 tonnes, the machine was part of a production line where it made rips for foil gloves. The pneumatic press allows for easy and quick replacement of punches of different sizes. The total weight of the machine is 200 kg. Technical specifications of the punch press RUIAN KODA MACHINERY - maximum press force: 3 t - working space (L x W): 260 x 260 mm - working stroke: 150 mm - pneumatic pressure: 0.5-0.8 MPa - power: 30 W - power supply: 220 V - press weight: 200 kg

RUIAN KODA MACHINERY punch press, built in China in 2020, was used in a production line to create film gloves rips. The machine has 3 tonnes of press force and the ability to change punches of different sizes. The total weight of the machine is 200 kg. Technical specifications of the RUIAN KODA MACHINERY pneumatic press - pressing force: 3 t - workspace (L x W): 260 x 260 mm - working stroke: 150 mm - pneumatic pressure: 0.5-0.8 MPa - power: 30 W - power supply: 220 V - total weight of the press: 200 kg

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

WaterJet STM MasterCut was manufactured in 2010 by the well-known Austrian company Stein-Moser GmbH. The machine performs precision machining of workpieces up to 180 mm thick using a pressurised water jet. The workpiece cutting process takes place on a large work area made of high-quality welded steel, with a length of 3000 mm and a width of 2000 mm, guaranteeing high stability and reducing the vibrations generated during machining. A modern CNC control installed in the control panel allows programming of the operating modes and full control of the machine. The STM WS3020 water cutting machine is equipped with a 37 kW BHDT HYTRON high-pressure pump, supplying the machine with high-pressure water. Technical parameters of STM MasterCut water cutting machine - working space (L x W): 3000 x 2000 mm - maximum workpiece thickness: 180 mm - positioning speed: 15 m/min - accuracy of po ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

TRUMPF TruLaser 3030 laser cutting machine was manufactured in 2011. The machine is equipped with modern components to provide precise cutting of workpieces made of mild steel, stainless steel and aluminium. High stability during processing is ensured by the steel body on which a state-of-the-art SIEMENS SINUMERIK 840D CNC controller is mounted for programming operating modes and control of the cutting process. The TruLaser 3030 Basic Edition laser cutting machine cuts metal sheets with a maximum weight of 900 kg and a thickness of 20 mm (mild steel), 12 mm (stainless steel) and 8 mm (aluminium) using a 3.2 kW laser beam, guaranteeing high precision and smooth and even workpiece edges. The laser is also equipped with an automatic pallet changing system. The total weight of the machine is 11500 kg. Technical data of the TRUMPF TruLaser 3030 laser cutting machine - CNC control: SIEM ...

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...

BYSTRONIC Byspeed 3015 laser cutting machine was built in Switzerland in 2004. The machine equipped with an extremely reliable BYSTRONIC Bylaser 4400 laser source with a power of 4.4 kW, performs the cutting and engraving process on workpieces with a maximum thickness of 25 mm (structural steel), 20 mm (stainless steel), 12 mm (aluminium) and 3 mm (brass, copper, titanium). Workpiece machining is performed on a large work table with a length of 3000 and a width of 1500 mm, allowing free access to the laser’s work area and for loading larger-size sheets weighing up to 890 kg. The control panel with BYSTRONIC ByVision CNC controller for programming the machining parameters has been placed on the arm to increase the machine operator’s comfort. Characteristics of the BYSTRONIC Byspeed 3015 laser cutting machine - maximum laser power: 4.4 kW - wavelength: 10.6 μm - laser beam di ...

The Prima Power Platino 1530HS laser was produced in 2006 by the Italian company Prima Industrie S.p.A. The 4 kW laser is equipped with a Primach 20L CNC control. The machine is used for cutting metal sheets with a thickness of 20 mm (black steel), 12 mm (stainless steel) and 8 mm (aluminum). The laser has an independent F axis with programmable focus position and nozzle distance. The maximum feeds in the X / Y / Z / F axes are respectively: 3050 mm, 1525 mm, 150 mm and 25 mm. The machine is equipped with: a Prima Power Convergent Lasers Division CX 3000 resonator with a power range from 200 to 3000 W and a cooling unit. In addition, the price of the laser also includes 3 cylinder regulators made of chrome-plated brass with a stainless steel diaphragm in the first stage of reduction and a bellows structure in the second stage of reduction, and 2 cylinder regulators for oxygen and nitroge ...

ELWIK RT-C hot runner control system is a device for ensuring the right temperature during the injection process. The mould temperature controller, built in a panel system, adjusts temperature in the range from 0 to 500°C using a coding switch. The advanced technology and safety features included in the device guarantee uninterrupted and reliable operation of the mould temperature controller. The P, PI, PID parameters are set automatically by the temperature controller to the injection moulding machine, thanks to an auto-adaptation function that ensures that the pre-set temperature is not exceeded. The heater is dried when the supply voltage is reduced, completely protecting it from burning out. The mould temperature controller is equipped with six heating zones with a 16 A load per zone, making it possible to process any type of plastic. Technical specifications of the ELWIK RT-C ...

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

DECKEL MAHO DMU 60 T CNC vertical machining centre was built in Germany in 1999. The machine performs precision machining of workpieces weighing up to 350 kg, in three axes with feeds of 600 mm (X axis), 525 mm (Y axis) and 500 mm (Z axis). Workpieces are placed on a tilting rotary table with the dimensions (L x W): 900 x 500 mm and they may also be machined horizontally, thanks to the mounted detachable milling head The high-performance spindle of the milling centre rotating at a speed of 12000 rpm, together with the advanced HEIDENHAIN Mill+ numerical control, guarantee excellent precision, quality and a significant reduction in machining time. The milling centre’s tool magazine has a capacity of 25 tools and provides tool changes in a very short time. The CNC milling machine is also equipped with a post-processor with CAD/CAM software and a desktop computer. The total weight of t ...

ELB SHLIFF SWBD-30 VA II surface grinding machine was manufactured in 1970 in Germany. The machine is equipped with an electromagnetic table consisting of three electromagnetic clamping plates, each 3000 mm long and 450 mm wide. It is possible to process workpieces on the work table of the magnetic grinder with a length of up to 3000 mm, width of up to 500 mm and maximum weight of 2000 kg. The grinding height depends on the grinding wheel wear – with a new grinding wheel it is possible to grind the workpiece with a maximum height of 450 mm, while with the used grinding wheel the grinding height is 540 mm. Grinding machine ELB SHLIFF SWBD 30 has also a mandrel for balancing grinding wheels, holders for grinding wheels and electro-automatic magnetic pole switch in electromagnetic plates. The machine underwent a complete overhaul carried out in 2002 by the Polish company JOTES. Tech ...

PRIMA POWER PLATINO 1530 laser was manufactured in 2001 in Italy. The machine is designed for cutting metal sheets made of structural steel, stainless steel and aluminium. The processed sheet may be up to 15 mm thick (structural steel), 8 mm thick (stainless steel) or 5 mm thick (aluminium). The feed rates in the X/Y/Z axes are 3000 mm (X axis), 1500 mm (Y axis) and 140 mm (Z axis) respectively. The laser cutting machine is equipped with a high performance ROFIN SINAR SLAB DC025 resonator with a power of 2500W, created for fast and precise cutting in metal sheets and guaranteeing the highest quality of cut elements. The installed PRIMACH 20L CNC control allows memorising many different work programmes and controlling every aspect of machining. The machine is offered with a wide range of equipment, including: CAD/CAM software SiCam v14 (license for one workstation) and post-processo ...

BALKANCAR T-10232 0,5T hoist was manufactured in 1970 in Bulgaria. The hoist is powered by a BALKANCAR КГ 1605-6 electric motor with a power of 0.75 kW and is designed to lift workpieces with a maximum weight of 500 kg, to a height of up to 12 metres. The buttons on the control pendant allows to determine the direction of movement of the workpieces in the up-down or right-left axis. The electric hoist has never been used and its weight is 154 kg. Technical specifications of the BALKANCAR T-10232 hoist - maximum lifting capacity: 500 kg - maximum lift height: 12 m - lifting speed: 8 m/min - travel speed: 20 m/min - cable diameter: 5.7 mm - electric motor: BALKANCAR КГ 1605-6 - power of electric motor: 0,75 kW - rotational speed of electric motor: 910 rpm - voltage: 200 V; 50 Hz - total weight of T 10232 device: 154 kg

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE B” material - hydromechanical q ...

PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in 2005, is used in the process of processing thermoplastics by injection moulding. The characteristic feature of the machine is a two-plate hydraulic mould closing system with attached closing cylinders, working with a force of 25 tons. The machine’s screw with 22 mm in diameter rotates at a speed from 10 to 370 rpm and is driven directly by a hydraulic motor. The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows for high automation of the injection process with setting and control of the injection parameters from the control panel located on the body of the machine. The injection moulding machine is offered with a wide range of equipment, including a plastic feeder and a MITSUBISHI E600 HMI panel. Total weight of the machine is 1470 kg. Characteristics of PONAR ŻYWIEC UT-025 H injection moulding ...

Strap cutting machine was built in 2019. The purpose of the machine is to cut seat belts and other materials such as PVC tape, nylon and velcro to a specific length. The raw material is taken from a roll and then precisely measured and cut using a cutting knife. The machine was built with the highest quality components from reputable brands. An installed controller allows you to set the correct temperature of the cutting knife, which by melting the edges of the cut material prevents it from delaminating and fraying during cutting. The tape cutting machine has never been used and is brand new. Technical specifications of the strap cutting machine - PC software: KEYENCE - temperature controller: OMRON - servomotors: MITSUBISHI ELECTRIC (3 pcs.) - rotary table: SMC INDUSTRIAL AUTOMATION (3 pcs.) - table rotation angle: 190° - electric heater: LIMATHERM SENSOR - inductive pr ...

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

BOVONE ELB 10/45 glass bevelling machine built in 2004 in Italy, is used in the process of grinding flat and inclined edges made of glass. Glass with a thickness between 3 and 30 mm is processed with the highest precision and accuracy using ten spindles. Exceptional stability during machining is ensured by a structure made of top-quality cast iron. The glass bevelling machine is maintained on an ongoing basis – in 2021, it underwent an extensive service during which components such as bearings on the spindles or cofferdam brushes were replaced. The glass edging machine is equipped with an infeed and outfeed conveyor with a load capacity of 800 kg. The machine weighs 4,200 kg. Technical specifications of the BOVONE ELB 10/45 glass straight line edging machine - number of spindles: 10 - minimum thickness of glass: 3 mm - maximum thickness of glass: 30 mm - minimum dimensions of ...

The SCHIESS RF 30 gear hobbing machine is a specialist machine for machining large gear wheels. The machine is designed for machining of gears by processing individual pitches of a gear wheel. The milling machine processes a workpiece with diameter from 60 mm to 3500 mm and a weight of up to 25 t. The spindle of the milling machine rotates at a speed from 6 to 69 rpm. The SCHIESS RF 30 machine is designed for milling with: – cylindrical milling cutters in steel / cast iron up to module: 24/30 – disc milling cutters in steel / cast iron up to module: 33/42 – end mills in steel / cast iron up to module: 33/42 50/65 Technical data of the SCHIESS RF 30 milling machine - largest diameter of the milled workpiece: 3500 mm - llargest diameter of the milled workpiece in the circumferential method and with tooth pitch up to 45 3000 mm - lsmallest diameter of the milled part: 60 m ...

WENZHOU HT-GF500B automatic disposable gloves making machine built in China in 2020, is intended for the production of foil gloves used for example, in grocery stores or in production. A solid machine body made of high-quality steel ensures high stability of the structure even at maximum production speed. The machine for making plastic gloves produces up to 220 pieces of disposable gloves in one minute, with a maximum length of 400 mm and a maximum width of 300 mm. The manufactured foil gloves have two layers of foil with a thickness of 0.008 mm to 0.02 mm, thanks to which they effectively protect hands against bacteria and viruses. The total weight of the machine is approximately 1600 kg. There are six such machines on sale, all built in 2020. Characteristics of the WENZHOU HT-GF500B automatic disposable gloves making machine - number of produced gloves: 180-220 pcs/min - num ...

Waterjet CLASSICA CL 610 was built in 2012 by Waterjet Corporation s.r.l. The machine allows to cut sheet metal with a thickness of 180 mm on a working area of size (L x W) 3400 x 2000 mm. The water cutting machine is controlled by a S 510 CNC controller and its total weight is 3000 kg. Technical data of the CLASSICA CL 610 water cutting machine - CNC control: S 510 - cutting area (length x width): 3400 x 2000 mm - maximum cutting thickness: 180 mm - accelerated feed: 0 – 30 mt/min - positioning accuracy: ± 0.075 mm - repeatability: ± 0,05 mm - dimensions (L x W x H): 4500 x 2300 x 1800 mm - weight: 3 000 kg

ECKERT DIAMENT FIBER laser was built in 2011. High-performance laser FIBER with power of 2 kW allows cutting sheets of black steel with thickness of 12 mm, stainless steel with thickness of 8 mm and aluminum with thickness of 8 mm. The cutting process takes place on a pendulum exchange table with dimensions (length x width) 3000 x 1500 mm. The machine is equipped with a Precitec HP 1.5 YAG SSL+EG8010 cutting head and a YLR-2000 Compact IPG 2 kW laser resonator. The entire system is operated using a CNC controller EckLaser 2872. The laser cutting machine has worked a total of 22503 hours. Technical data of laser cutting machine ECKERT DIAMENT FIBER - laser power: 2 kW - thickness of cutting black steel sheet: 12 mm - thickness of cutting stainless steel sheet: 8 mm - thickness of cutting aluminum sheet: 8 mm - table dimensions (L x W): 3000 x 1500 mm - type of table: pendulum  ...

PEMAMO MDR 120E horizontal honing machine was manufactured in 2002 by the Swiss company PEMAMO HONING PHOSA SA. The machine is used for specialised honing of bores, such as piston cylinders, in order to achieve the required dimension, tolerance and high surface quality. Thanks to the honing machine, shape defects such as scratches, axis curvature or waviness are removed. The honing machine performs finishing of bores with diameters from 1.5 mm to 40 mm, using a spindle rotating from 310 to 1860 times per minute. The horizontal honing machine is provided with an AR 340 semi-automatic expansion unit with a repeatability of 1 µm. The total weight of the machine is approximately 135 kg. Technical data of the PEMAMO MDR 120E honing machine - minimum honing diameter: 1.5 mm - maximum honing diameter: 40 mm - rotational speed of the spindle: 310-1860 rpm - semi-automatic expansion un ...

SENFENG FLK 120 automatic mask making machine manufactured in 2020 in China, is used for the fully automatic production of masks consisting of three layers of fabric materials. The masks produced are used in the medical industry, as well as protecting us in everyday life by filtering harmful substances in the air, such as dust and bacteria. The machine producing surgical masks automatically cuts, folds and stitches the fabric used in their production. Ear bands with a diameter of 3 mm, as well as nose strips with a width of 2 to 3 mm are added to the masks. The mask making machine guarantees a high production output, producing 90 to 120 masks per minute with a production quality rate of up to 98-99%. The surgical mask making machine is equipped with a Delta PLC controller featuring a touch screen, making the work on the machine much easier. The total weight of the automatic mask ma ...

PONAR ŻYWIEC SG-180FE-2B plastic mill built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main advantages of the device are its comfortable operation and low noise level during machine’s work. SG 180FE 2B granulator is equipped with 9 rotary knives and 2 fixed knives with a length of 180 mm, capable of milling up to 30 kg of plastic elements per hour. The machine is offered with dust extraction. Total weight of the machine is 120 kg. Technical data of granulator PONAR ŻYWIEC SG-180FE-2B - length of blades: 180 mm - number of rotary blades: 9 - number of fixed blades: 2 - capacity: 30 kg/h - maximum rotation speed: 940 rpm - throat depth: 200 x 220 mm - dust extraction - motor power: 1,5 kW - power supply: 380 V; 50 Hz - ...

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

ERMAK CNC HVR 3100 x 13 hydraulic guillotine shears built in Turkey in 2008, are designed for cutting workpieces made of among others mild steel or stainless steel. The metal sheet with a maximum length of 3100 mm and a maximum thickness of 8 mm (plain steel) or 13 mm (stainless steel), is held during machining by 14 hydraulic clamps. The angle of the cutting blade can be freely adjusted in the range from 0.5° to 2.0°. Full control over the operation of the CNC HVR 3113 machine is guaranteed by the control panel located on the guillotine shears body with installed CYBELEC DNC 60 CNC controller, allowing programming of many different machining processes. The guillotine shears is equipped with among others new cutting blades and a foot control pedal, making the operator’s work much more comfortable and simple. The total weight of the machine is 13400 kg. The total weight of the mach ...