advanced search
36789 results
New in: 2001
used
Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly.
New in: 2007
used
A Ringler suction system with 2 Ringler motors is available. On-site inspection is possible.
used
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 75 to stroke: 15 mmV-RING nominal force: 75 to stroke: 13 mmTOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mm distance between columns (H-frame): 560 mm passline opening (free passage in side columns): 270 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step max.: 999.99 mm sheet ...
New in: 1998
used
X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, number of T-slots/width/spacing: 5/18/120mm, table dimensions: 1800x700mm, max. workpiece weight: 2.5t, connected load: 16.5kW, weight: 10.1t, with documentation and tool cones, without tools.
New in: 2018
used
Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm
New in: 1971
used
PRESS DESIGN drive system: knuckle-joint feedstock transport direction: right to left SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 70 /minCOUNTER RAM nominal force: 22 toV-RING nominal force: 25 toTOOL DIMENSIONS lower table (left-right): 430 mm lower table (front-back): 490 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 230 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 180 mm sheet thicknes ...
used
Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced.
used
New in: 2002
used
SLIDE total force (nominal): 880 to stroke: 305 mm cutting velocity min.: 5 mm/s cutting velocity max.: 70 mm/s closing velocity: 200 mm/s returning velocity: 200 mm/sV-RING nominal force: 400 to stroke: 40 mmCOUNTER RAM nominal force: 200 to stroke: 40 mmTOOL DIMENSIONS lower table (left-right): 1010 mm lower table (front-back): 1600 mm upper table (left-right): 1000 mm upper table (front-back): 1000 mm shut height max.: 460 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 450 mm sheet thickness max.: 16 mm feeding step min.: 1 mm feeding step max.: 999.9 mm sheet length min: 3950 mm speed max.: 48 m/min Vertical adjustment: 140 ...
New in: 1977
used
Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced.
New in: 1973
used
Max. working width: 3000mm, max. sheet thickness: 8mm, with documentation.
New in: 1981
used
CONTROLS PLC PRESS DESIGN drive system: hydraulic frame design: C-frame, single sided table cushion: yes PRESS FORCES total force (nominal): 160 toPRESS TABLE table surface (left-right): 1250 mm table surface (front-back): 600 mm thickness of bolster plate: 100 mmSLIDE table surface (left-right): 750 mm table surface (front-back): 450 mm stroke: 500 mmSLIDE (HYDR. PRESS) approximation velocity max.: 200 mm/s return velocity max.: 250 mm/sTOOL ASSEMBLY DIMENSIONS distance table - slide max.: 800 mm throat (C-frame): 360 mmELECTRICAL SPECIFICATIONS total power consumption: 20.5 kW mains voltage: 380 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1250 m ...
used
Control system: Contour 2 lid, the machine has no operating hours counter, the control system parameters must be reloaded onto the machine, the buffer battery is empty, an on-site inspection is possible.
New in: 1986
used
With dual stroke, max. punching force: 40t, stroke: 30-60mm.
New in: 1990
used
PRESS DESIGN drive system: hydraulic frame design: C-frame, single sided PRESS FORCES total force (nominal): 12 toSLIDE stroke: 200 mmELECTRICAL SPECIFICATIONS mains voltage: 380 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 1000 kg
New in: 1983
used
Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible.
New in: 1976
used
Max. punching force: 40t, stroke: 10-50mm, the automatic lubrication needs overhauling.
New in: 1971
used
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: link drive feedstock transport direction: left to right SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 80 /minCOUNTER RAM nominal force: 22 to stroke: 8 mmV-RING nominal force: 25 to stroke: 15 mmTOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 220 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mm feed velocity max. ...
used
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective.
New in: 2004
used
Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.