advanced search
36783 results
New in: 1976
used
Max. punching force: 40t, stroke: 10-50mm, the automatic lubrication needs overhauling.
New in: 1971
used
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: link drive feedstock transport direction: left to right SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 80 /minCOUNTER RAM nominal force: 22 to stroke: 8 mmV-RING nominal force: 25 to stroke: 15 mmTOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 220 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mm feed velocity max. ...
used
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective.
New in: 2004
used
Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.
New in: 1992
used
CONTROLS electronic controls PRESS DESIGN frame design: 4 column PRESS FORCES total force (nominal): 400 toPRESS TABLE table surface (left-right): 1200 mm table surface (front-back): 800 mmSLIDE slide force: 400 to table surface (left-right): 1200 mm table surface (front-back): 800 mm stroke: 500 mmSLIDE (HYDR. PRESS) approximation velocity max.: 290 mm/s working velocity min.: 25 mm/s return velocity max.: 290 mm/s return force: 35 toTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1100 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2255 mm space requirements -front/back-: 1660 mm t ...
New in: 1987
used
Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.
used
Several Schlebach machines are available for complete thin sheet processing. 1) Profiling machine Quadro TP without cassettes, infeed width: 300mm-8000mm, control: Schneider Magelis. Including electronic length measurement, motor-driven roller knife for cross-cutting, documentation and spare parts list. 2) Infeed table EZT 12050 RS 10 with pivoting roller cutter (max. +10°). Length measurement min.: 1000mm, speed: 10m/min, infeed width: 1250mm, max. capacity non-ferrous metals/sheet steel/stainless steel sheet: 0.80mm/0.70mm/0.50mm. Documentation available. 3) Decoiler 2/600, max. coil width: 600mm, max. coil weight: 2000kg, max. coil inner diameter: approx. 510mm, max. coil outer diameter: approx. 1500mm. Documentation available. 4) Pair of exchangeable cassettes for Quadro, stations: 12, swivel capability: no, special profiling for non-ferrous metals with 0.5mm thickness. Documentatio ...
New in: 1981
used
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes quick die change system: yes feedstock transport direction: right to left PRESS FORCES total force (nominal): 315 to nominal work capacity: 45 kNmPRESS TABLE table surface (left-right): 2250 mm table surface (front-back): 1100 mm thickness of bolster plate: 150 mm height above floor level: 1000 mmSLIDE slide force: 315 to table surface (left-right): 2250 mm table surface (front-back): 880 mm stroke: 210 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke rate (min.): 25 /min stroke rate (max.): 80 /min main drive power: 60 kWSLIDE EJECTOR / CUSHION working principle: ...
New in: 2000
used
X-travel: 2000mm, y-travel: 1000mm, z-travel: 1000mm, table dimensions: 2200x1000mm, number of T-slots/ width/ distance: 7/ 22/ 140mm, max. workpiece weight: 7.2t, connected load: 40kW, weight: 17t, operational hours counter machine on: 33,852h, with documentation and accessories, without operating hours counter, has been regularly serviced, on-site inspection is possible, available from May 2024.
New in: 1992
used
Working width: 3050mm, workpiece thickness: 3-15mm, connected load: 9.6kVA, length: 4986mm, width: 2000mm, height: 1670mm, weight: 2.7t, including documentation.
New in: 2008
used
PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 1 number of slide actions: 1 table cushion: no PRESS FORCES total force (nominal): 125 toPRESS TABLE table surface (left-right): 1100 mm table surface (front-back): 630 mmSLIDE table surface (left-right): 700 mm table surface (front-back): 400 mm stroke: 150 mm stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS) slide adjustment: 90 mm stroke adjustment: yes stroke min.: 15 mm stroke max.: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 70 /min main drive power: 15 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 400 mmELECTRICAL SPECIFICATIONS ...
New in: 1983
used
New in: 1995
used
Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.
New in: 2016
used
PRESS DESIGN drive system: hydraulic openings in uprights: yes number of suspensions: 1 number of slide actions: 1 slide ejectors / cushion: yes opening in table: no PRESS FORCES total force (nominal): 800 toPRESS TABLE table surface (left-right): 1300 mm table surface (front-back): 1300 mmSLIDE stroke: 700 mmSLIDE EJECTOR / CUSHION nominal force: 5 to stroke: 20 mmTOOL ASSEMBLY DIMENSIONS distance table - slide max.: 1200 mm distance between columns (H-frame): 1325 mmELECTRICAL SPECIFICATIONS total power consumption: 400 kWDIMENSIONS / WEIGHTS total height: 6100 mm total weight approx.: 55000 kgATTACHMENTS (PRESSES) press automation: yes acc. to actual accident protection r ...
used
X-travel: 2520mm, y-travel: 3520mm, z-travel: 160mm, table dimensions: 2500x3500mm, control: CNC Microstep 980, length: 4320mm, width: 3100mm, height: 1820mm, weight: 900kg, including production computer with flat screen and Cenon CAM software, combination cutting/folding device, dust extraction device, industrial vacuum cleaner (1200W, 36l container volume), cooling and spraying device, automatic Z-adjustment, control cabinet, control and simultaneous interpolation of up to 5 axes, true 3D machining possible, continuous path with dynamic, pre-calculation, high machining speed exponential acceleration ramps, 4 digital outputs, 4 digital inputs, spindle interface (digital and analog), connection options are spindle controller, electronic workpiece leveling, automatic Z-adjustment, automatic tool change, automatic tool change, automatically switched tool cooling, safety device, control pan ...
used
Max. workpiece thickness: 20mm, including one unused and originally packed set of blades.
New in: 1971
used
CONTROLS PLC BECKHOFF SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (min.): 28 /min stroke rate (max.): 70 /minV-RING nominal force: 25 toCOUNTER RAM nominal force: 22 toTOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 200 mm sheet thickness max.: 5 mm feeding step min.: 0 mm feeding step max.: 999 mm pilot release system: yes measuring wheel: optional ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzATTACHMENTS -FINEBLANKING PRESS- waste cutter: yes Example of an overhaule ...
used
Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.
New in: 1985
used
Max. pressing force: 250kN, stroke: 13-38mm, stroke speed: 875-1500/min, connected load: 20kW.
used
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 toSLIDE slide force: 6 to stroke: 114 mmSLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kWSTRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kgATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engagement: yes n ...