advanced search
1359 results
New in: 1991
used
Specifications Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000)mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1991 Productivity: approx. 3 bales/hr
New in: 2020
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1050 mm Year of construction: 2020 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 8.5 tons/hour Theoretical throughput to density 50kg/m3: 11.6 tons/hour
New in: 2015
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1200 mm Year of construction: 2015 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 6.7 tons/hour Theoretical throughput to density 50kg/m3: 9 tons/hour Press capacity: max 190 m³/h
used
DREHER HEAVY DUTY GRANULATOR, (photos taken before reconditioning), One machine from heavy scraps to regrind, S 60-65 SRV GF, Infeed 650 x 600 mm., solid rotor 650 mm wide 600 mm Ø, n.8 rotating knives, n.3 still knives, throughout rate 500-1.500 kg/h depending on screen, 75 kw drive, NEW electric panel, screen : bespoke to project, Machine totally reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of blower, pipes, etc., Total dimensions: LxWxH 1,36 x 2,8 (3,3 open) x 3.64, This is a hevy duty granulator especiallly constructed, for the efficient granulation of thick walled plastic parts such as, lumps, chunks, plates, pipes. One machine does the job with great saving!, It can handle very heavy parts without need of pre-shredding, installed power : 75, HIGHLIGHTS: HEAVY DUTY MACHINE
New in: 2001
used
TECNOVA WATER RING PELLETIZER, Type TTC1000 vertical, Drying centrifuge with water tank and re-circulating pump, n. 1 spare pump, cyclone for granulate discharging, pulpit electric panel, now producing 1200 kg on a 160 mm extruder, Construction year 2001, Machine offered reconditioned
used
Channel baling press, already dismantled, 11,000kg, Bj. 1985, 35Kw, ready for collection from the Vienna location
New in: 2023
new
CROCODILE SHOVEL with 2 rear hyd. Cylinders, strong double-stiffened hold-down, available in different working widths and with different mounts, Other mounts such as Atlas, Avant, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer also available!
used
automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t
New in: 2018
used
Screw conveyor for various materials in very high-quality design with replaceable wear parts, electrically driven, feed length approx. 7 m, feed width approx. 1 m, discharge in the middle, hardly run, very good condition, for example suitable for filling a conveyor belt with the wheel loader, etc.
New in: 2013
used
Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.
New in: 2012
used
Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.
New in: 2014
used
Drum screening machine for sieving compost, humus, sand, wood chippings, waste fractions, shredded goods etc., machine is technically completely overhauled, 1 x screening drum as required new or as good as new included, good ready for use,
New in: 2014
used
Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.
New in: 2016
used
Drum screening machine for sieving compost, humus, wood chips, biomass, sand, garbage, etc., very good condition, service new, incl. 1 sieve drum as required,
New in: 2023
used
DUAL SHAFT SHREDDER (next-to-new), Shredding chamber 1.500 x 900 mm, 37 kW a.c.drive with inverter, Sturdy supporting structure, Generous loading hopper, Machine dimensions LxWxH 3,53 x 1,99 x 2,98 mt., for plastics, wood, WEEE, industrial waste, bulk domestic waste and more, installed power : 37
New in: 1991
used
Höcker shredder with waste compactor and conveyor belt • incl. waste compactor • incl. conveyor belt • Year of construction: 1991 • Type: Pacomat 2
New in: 2006
used
New in: 2015
used
Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...
New in: 2012
used
Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available
New in: 1997
used
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately