subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 703)
There are two Multi-Purpose Heaters Juwo available, capacity tank 1/2: 3000/2500l, with documentation. ... más información
There are two machines available (1) Pasteuriser Bertsch, output: 8500l/h, controls: Siemens S7 (2) Centrifuge Westfalia, output: 8500l/h, with sieve, the documentation is available. ... más información
Was used for the production of double cream cheese, low-fat quark, as well as 20/40% quark and skyr, milk with 3.7% fat was also concentrated to 37% dry matter, throughput capacity: approx. 3500-5000 litres with a service life of 8 hours, includes (1) stage 1 with six 6 inch pressure pipes, each with two spiral wound modules, filter Mikrodyn Nadir DS-IP020-6338E1, filter area: 13.4m²/module, total filter area: 160.8m², flow rate centrifugal pump: 145m³/h, 3.5bar (2) Stage 2 with four pressure pipes in the same design as in stage 1, filter area: 107.2m², flow rate centrifugal pump: 160m³/h, 5bar (3) P&F module Tetra M37/9/2, filter area: 9m², flow rate positive displacement pump: 75m³/h, 6bar, an on-site inspection is possible.
Capacity: 50l, machine dimensions: Length: 880mm, Width: 680mm, Height with flap closed/open: 1030mm/1350mm. On-site inspection is possible. ... más información
There are two identical cutting machines available, weight: 90kg, with documentation. ... más información
Trolley dimensions: 920x910x1950mm, connected load: 24kW, length: 1560mm, height: 2560mm, with documentation, a few years ago the electrics were completely overhauled. ... más información
Max. output: 1,2t/h, length: 2620mm, width: 1180mm, height: 1680mm, weight: 1t, with trolley. ... más información
Connected load: 13kW, six additional belts are available as spare parts. ... más información
Compressed air connection: 6 bar, connected load: 0.75 kW, can be inspected on site. ... más información
Suitable for filling sausages, as well as potato and sausage salads, caliber: 55/60mm, throughput: 3-4 sausages/min, capacity per hopper: approx. 100kg, year of construction: 90s, without documentation, an on-site inspection is possible. ... más información
Capacity: 200-800kg/h. The machine is used for the production of stretched curd. Includes: Rising bowl: Prima, cutting device: Prima, lifting and tilting device: Frontmatec Hygiene - for holding 200 and 300 liter standard loading trolleys for efficient use in the food industry. ... más información
Operating temperature min./max.: 0°C/30°C, water consumption: 4-8l/min, belt width: 280mm, belt length infeed/outfeed: 5192mm/2484mm. Dimensions X/Y/Z: 3300mm/900mm/1400mm, weight: approx. 900kg. Documentation available. ... más información
Mobile double clipper. These user-friendly and efficient machines handle natural, artificial, and fibrous casings for a variety of portioned food and non-food applications. Durable stainless steel construction. Applications – sausage, fresh ground meats, soy tofu/tempeh/seiten chubs, vegan sausage, fresh ground fish, surimi/fish sausage paste, raw/frozen/refrigerated pet food, pumpable cheese, soup, sauce, and industrial explosives chub packages. Capacity up to 130 cycles / min depending on the product. Air pressure: 6 bar. Power: 380 V - 50 Hz - 0,5 Amp. Stainless steel control panel with Siemens S7-200 PLC and on/off switches., Including ± 40 reels of clips, type XEC21-210T., Additional features:, This machine can be combined with the vacuum filler, Stock Number #1059 (Vemag HP3), see photo. Additional piping in between the 2x machines is excluded., Type of Machine: Double clipper, ...
Compact and versatile vacuum filler for small producers. An individual machine for the production of specialities and equipped with the proven double screw technology as used in large industrial machines. Double screws made out of stainless steel. Double screw housing made of high-quality industrial plastic approved for contact with food. The perfect solution for maximum cost-effectiveness, the HP3 is predestined for the transition from a piston filler to a Vemag vacuum filler. Can handle soft and firm masses. Minimu residual product volumes. Quick and easy cleaning. Perfect hopper infeed geometry for a continuous product flow. Hygienic vacuum ssytem with easily accesible cleaning area. Controls with 7 Touchscreen display and precise servo technology with intelligent control unit. The machine has only: 175 operating hours! Filling output: up to 2.000 kg/h. Portion weight: 0 - 100.000 gra ...
The GALAN 930 is designed for, but not limited to, processing of high volumes of sturdy, stringy or hard products. Also soft and fragile products can be cut with GALAN 930. With a cutting area of 160 mm (6 1⁄4”) x 360 mm (14 1⁄4”) all common muscles can be cut, and the up to 4 mm (5/32”) thick scimitar blades and the up to 2 mm (5/64”) thick circular blades allow also the processing of very cold, even frozen products. Using different belt, scimitarblade- and circularblade- profiles the machine is adapted to our your production needs., - Fresh cutter for large and productions, - Continuous product supply, - Cutting area 160mm (6 ¼”) x 370mm (14 ½”), - Knife-sets available from 5mm (1/4) to 180 mm (7), - Minimum slicing thickness 4 mm (1/8”), - Down-holder pressure pneumatically adjustable, - Pneumatic belt tensioning, - Very easy to clean due to easy to open covers and ...
All stainless steel meat mincer for flaked frozen meat. One of the best meat Grinders on the market 220 mm Diameter plate One knife, one mince plate set up With end ring support hoist ... más información
Linco Flex-cut up line : - Tail cutter - wing tip cutter - Middle wing cutter - wing cutter - pre-cutter - Front half cutter - Breast cap cutter - Saddel splitter - Drum cutter - Chops cutter - unloader More pictures on request ... más información
A bacon cutter from Treif is sold Type: Felix Year of construction 2016 incl. 2 pairs of creels of your choice Machine is in good condition and ready for immediate use Price from stock 6800 net ... más información
An injector from Rühle is sold Type: IR 29 Year of construction 2019 Capacity: approx. 2000 kg/h Belt width: 360 mm With steaker attachment The machine is in very good condition ... más información