máquinas de procesamiento de carne y pescado usadas para la venta

Kolbe MWE32 Mixed Meat Grinder completely made of stainless steel, screw, screw housing and union nut made of special alloy smooth running Wheeled on wheels Machine should be thoroughly cleaned before use Video about test run available  ... más información

Kolbe MWE98 Mixed Meat Grinder complete in stainless steel, auger, auger housing and union nut made of special alloy Smooth running Mobile on castors Machine should be thoroughly cleaned before use B98 5-Piece Under Cutting System! Video about test run available  ... más información

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

Free-fall mixer Stainless steel drum Angle adjustments of the drum and emptying possible via lateral adjusting wheel Volume: approx. 140 litres Voltage: 230V Weight: approx. 96kg The machine comes from a mill in which it was used to mix flour. Accordingly, residues are still present and the machine must be thoroughly cleaned before use The lid does not close 100% tightly and the sprocket has already been repaired

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Delitech IFOOMA 15 Liter Cutter Stainless Steel used Stainless steel cutter with 3 cutter head and knife shaft brake Two speeds for knife shaft and bowl The bowl is made of solid cast stainless steel and the case is made entirely of stainless steel. Since an auxiliary contactor is currently hanging, the machine does not stay on in 2nd gear. That's why we opened the case and saw the best workmanship here as well. The electronics are also installed in a stainless steel housing, which can be pulled out of the machine on rails to check the fuses, for example. Width: 815mm Depth: 590mm Voltage: 400V Power: 2.4/3kW knife shaft; 0.45/0.55kW bowl drive Knife shaft speed: 1400/2800rpm Bowl speed: 9/18rpm Knives: 3 Bowl volume: 15 liters Weight: 110kg Year of construction: 2016 Machine must be thoroughly cleaned before use. Video about test run available

Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, tidy and smooth running Timer switches off the machine after the set time has elapsed very good condition, should still be thoroughly cleaned before use Video about test run and further pictures available

White PF90/180-REG portioning machine used Hourly output approx.: 2000 servings Ejector diameter: 90mm (Other drums on request) Thickness adjustment via drum possible Operation via foot pedal, if you go down from it, the machine stops Poti for speed regulation is fixed, should be made viable, or replaced Machine with corresponding signs of use and wear but in good condition neat and quiet running Machine must be thoroughly cleaned before use New list price 2019 in this equipment: 16850,- EUR net Video about test run and other pictures available

Dadaux TITANE 45 Liter Cutter Stainless Steel used Stainless steel cutter with 6 cutter head and knife shaft brake Two speeds for knife shaft and bowl Machine has the following defects: Screw for plaster opening is missing 4 feet missing Noise protection cover broken Main switch toggle broken Lamp cover of the control panel is missing Bowl runs slightly out of round The shortcomings have already been taken into account in the pricing Video about test run available

Alexanderwerk W82U5 Meat grinder used completely made of stainless steel Smooth running 1.1kW Machine should be thoroughly cleaned before use H82 5-piece Unger cutting system with coded perforated disc! Video about test run available  ... más información

Bizerba FW82T/22 Meat Grinder used completely made of stainless steel Smooth running 2.35kW Machine should be thoroughly cleaned before use Video about test run available  ... más información

Stephan MCV10 Microcut, continuous cutter, colloid mill, koial mill, emulsifier Voltage: 400V Speed: 2850rpm Stainless steel funnel Machine heavily soiled and with rust deposits on the housing without nameplate very loud run, because bearing damage, therefore sale as spare parts donor or hobbyist object Video about test run available

Alexanderwerk GMD70 II lifting swaging machine used Stainless steel boiler and kneading arm Boiler with drain hole for cleaning water with protective grille made of stainless steel Machine was built by Diosna and is the size of an S35 two speeds, but rough running, should therefore possibly be subjected to a bearing change Timer switches off the machine after the set time has elapsed otherwise good condition, should still be thoroughly cleaned before use Video about test run available

MADO used Selekta bone bandsaw Machine runs loud, and therefore has no brake at a bargain price before use the machine must be cleaned thoroughly  ... más información

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of construction: 2004 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of construction: 1995 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original stainless steel base Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of construction: 1995 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

akuum-ham press Technical data: completely made of stainless steel Mobile stainless steel frame 1 container for approx. 40-50 kg inclusive Total ext: H130 x w75 x T130 cm incl. Busch vacuum pump: 40 m³/h See pictures original Super condition!  ... más información

Chicken grill Manafacture: UBERT Specifications: Model Chicken Grill: UBERT ROTISSERIE RT88E 400V / 50Hz / 28.8 kW / 41.6 A Year of construction: 2012 can be moved on castors 15 skewer shots including 17 skewers Dimensions: WxDxH: 127 x 90 x 220 cm Original price EUR 23.818,- Selling back as if from the customer Untested as a spare part/defect at a bargain price! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicing machine packaging line Slicing / Depositing / Packing KUCHLER S.A.M. P2 Specifications: Slicer type: SAM P310 f v Type foil dispenser: SAM KP 21 Airless Type Packer: SAM IL - 4 - 220 Airless Type of labeller: Mettler Toledo UC-GTT-M 400 volts / 50 Hz / 3.79 A Year of construction: 2014 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Performance up to 150 packages per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated Original price in this version approx. EUR 55,000 Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.