FOLCIERI GRANUATOR TOP800, 800 mm. wide rotor, 530 mm rotor Ø, 90 kw ABB drive, constructed in 2002, complete with control cabinet, now connected and running, available either AS IS or RECONDITIONED, installed power : 90
LINDNER MICROMAT MS2000, rotor length 2.025 mm., n.104 knives, knives size 43x43x23 mm., screen size 50 mm., V-belt 75 kw drive 400V 3Ph.50 Hz 1500 rpm, rotor speed 80 rpm, hydraulic ram, constructed in 1997, offered RECONDITIONED, installed power : 75
- Mutton NZ 700 E - Year of construction 2007 - incl. magnet - Incl. all-metal detector and ejection - Incl. feed belt and discharge belt - good condition
Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/yearFor sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components:1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW302 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations1 piece ventilation sy ...
Technical data single-deck ballistic separator for three separation fractions:Manufacturer Lubo Screening & Recycling Systems B.V.Type Elliptical 10EBB05Year of construction 2015Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kgNote on the separation process:The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans.Condition of the machine:The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in a well- ...
Technical data shredder:Manufacturer Lindner Recyclingtech GmbHType Micromat 2000Year of construction 2012Operating hours 5,842 hours, as of MarchDrive power 160 kWFilling opening 2,790 x 2,405 mmFilling height 2,594 mmCutting chamber volume 4.5 m³Number of sieve sheets 4 piecesDischarge width 2,225 mmInput density 160 up to 200 kg/m³Input granulate
Technical data shredder:Manufacturer Vecoplan AGType VAZ 1300 M FF TYear of construction 2014Operating hours 3,033 hoursDrive type HiTorc driveDrive power 90 kWSpeed variable, 0 up to 360 rpmRotor length 1,295 mmRotor diameter 370 mm35 cutting crowns 40 x 40 mmMachine dimensions without hopper 3,170 x 2,365 x 1,500 mm (l x w x h)Weight 6.4 tonnesApplication description of the manufacturer:The VAZ 1300 M FF Rotary Shredder with the SureCutTM Cutting System is designed specifically for single-stage reduction of plastic films and synthetic fibers being reclaimed for extrusion. The FF Series is built for high throughput, has built-in metering capabilities and thermal monitoring controls. Benefits of the SureCutTM Cutting System include precise cut lengths and high bulk densities.Comments:The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possib ...
Technical data shredder:Manufacturer Vecoplan AGType VAZ 1100 XL KYear of construction 2014Operating hours 1,224 hoursElectromechanical drive Drive power 37 kWSpeed 160 rpmRotor length 1,070 mmRotor diameter 370 mm48 cutting crowns 40 x 40 mmMachine dimensions without hopper 2,550 x 1,900 x 1,110 mm (l x w x h)Weight 3,1 tonnesApplication description of the manufacturer:The Vecoplan VAZ® 1100 K XL Rotary Shredder is designed especially for size reduction of difficult industrial materials such as plastics, dunnage, wood scrap, medical waste, municipal waste, furniture parts, pallets, carpet, cardboard and paper.Comments:The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.
Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
Baler Presona LP 50 EH2, built in 2005, baling force 50 t Specifications: Manufacturer: Presona Sweden Type LP 50 EH2 Year of construction 2005 Press force 50 t Drive 37 kW Throughput rates at bulk density of 50 kg/m³: 11-13 t/h 100 kg/m³: up to 25 t/h Filling opening: 1250 x 1100 mm Bale size 1100 x 720 mm Bale weight: 400-550 kg Bonding 5-fold Transport dimensions approx. 8100 x 2120 x 2680 mm (LxWxH) Weight approx. 15 t The press is currently still in operation and can be viewed on request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.
Cutting force: 900 t., Cutting width: 940 mm, Max cutting stroke: 600 mm, Cutting length variable, Cutting strokes per min. approx. 4, Pressure material clamping cylinder: 180 t., Pressing force press cover cylinders: 2 x 350 t, Pressure force supply cylinder: 120 t., Press box dimensions, opened: 7000 x 2400 mm., Press box dimensions, closed: 7000 x 940 x 600 mm, Cutting capacity square: 110 mm (e.g. with normal, steel 37 kg/mm²), round 120 mm plate 70 x 700 mm, Production capacity approx. 20 tons/hour,, depending on the type of scrap, cutting length and the load on the machine., Drive power: 1x diesel engine, Scania DC16 500 HP., Pumps High-pressure axial piston pumps with self-regulating flow. Manufacturer Bosch-Rexroth., Year of manufacture: 2012, Weight of the machine approx.: 75,000 KG, Cutting force: 900 tons., Cutting width: 940 mm, Max cutting stroke: 600 mm, Pressure material ...
Hazemag feed hopper with take-off conveyor Brand: Hazemag Dim. Bunker : 6800x1900/1000x1200 mm Trigger strap: belt width 1200mm, length 8M. Drive: Slip-on gearbox 1.5 kW
used blower, Reitz MXE 160-003130-00 22kW as good as new Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.
used blower, Herbold MFT 55/500 11kW Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.
used blower, Herbold MFT 8/280 Sale only to professionals, under exclusion of any warranty, prior sale, errors excepted.
Technical data Feed hopper with hydraulic moving floor and bag opener:Manufacturer BRT HARTNER GmbHType HP5-3035Year of construction 2015Hopper volume 30 m³ Drive line 17.5 kWDimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h)Condition of the machine:The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high.Comments:The documentation (Manual, CE-declarat ...
This ECS is used to separate the non-ferrous metal fraction from other scraps in plastic recycling lines.., It can handle very small parts but even larger ones, up to 400 mm, depending on the model., Metals which will be separated are : copper - alluminium - brass - bronze, Constructed in a workmanlike manner, durable and efficient machines made in Italy, these devices offer excellent performances in any plastic processing line., To get a customized offer, please send us :, - material processed and size, - contamination % and type, - max contaminants size, - throughput rate of the line
fire: IDROMEC, Model: T1000x8000LS, Status: Used, non-refurbished, approx. 2,800 working hours, Year of construction: 2008, Shearing force: 1000 ton, Hold down force: 140 ton, Box length: 8 meters., shear throat: 900x700mm, Open box width: 3280mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Control cabin yes, Remote control AUTEC, PLC: Semi-automatic cutting and baling cycle, Supporting legs: N.4 oversized hydraulic supporting legs/feet, Total weight: approx. 75 ton, Warranty: none, fire: IDROMEC, model: T1000x8000LS, Year of construction: 2008, shearing force: 1000 ton, Hold down force: 140 tons, box length: 8 meters., shear throat: 900x700mm, Open box width: 3280 mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Total weight: approx. 75 ton, Warranty: none
LINDNER VEGA SINGLE SHAFT SHREDDER, type VEGA 1.650, 90 kw drive, rotor width 1.650 mm., loading hopper : 2,6 m3, shredding surface 1.100 x 1.800 mm., rotor width 1.630 mm, 434 mm Ø, 6 Bar ram, weight : about 8.500 kg, dimensions : LxWxH 3,4 x 2,35 x 2,81 mt., This machine is offered reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), installed power : 90, width: 1.650 mm.
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw