0 SMERAL Pneumatic Presses used machines

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Key data: 100 t, 355 mm, 125 mm

Press force 100 t The dimensions of the table top 1000 x 640 mm Stroke adjustment 125 mm Plunger adjustment 90 mm Stroke rate 75-150 rpm Main motor power 6/10 kW Machine dimensions L x W x H 1725 x 2230 x 2970 mm Machine weight 10100 kg

Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

Key data: 10 t

Various spare parts for eccentric press - brands SMERAL and VSS KOSICE

SMERAL TRNAVA LEN 63C eccentric press was built in 1988 in Czechoslovakia by Šmeral Trnava. It is an extremely reliable machine designed for cold metal forming. It is capable of performing operations such as precise punching, stamping and bending of workpieces. The high press force of 63 tonnes, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 45 and 140 strokes per minute and its stroke is adjustable in the range from 10 mm to 105 mm. With its very rigid C-shaped design, the SMERAL TRNAVA LEN 63C also provides excellent stability during even the most intense challenges. All this makes the offered press an excellent choice for the production of parts with high repeatability and excellent precision. The LEN 63 C eccentric press weighs 5850 kg. Technical specifications of the SMERAL TRNAVA LEN 63C press - maximum press force: 63 t (6 ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN

Inv. Num. : 8399 Type: QRM 300/4 Producer: SMERAL Generated: Parameters: Maximum sheet metal plate width: 300 mm Maximum sheet thickness when cutting: 4 mm Machine weight: 630 kg The straightening apparatus was completely repaired (rollers reground and new electrics).

Pneumatic screwdriver, pneumatic screwdriver DESOUTTERDrück air screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4QDreh torque range: 0.6-14.0 NmSpeed: max. 510 rpm. Compressed air requirement: 6 barAir consumption: 8.7 l/sBit input: M6- rotary switch for clockwise and counterclockwise rotation (rotary ring control)- without screwdriver shutdown- compressed air control cable 4 mm- compressed air connection for screwdriver function min. 10 mm- Aluminum bracket for handling device- Screw feeder 12 mm (inner diameter)Dimensions L x W x H

Pneumatic press, pneumatic press BOSCH type 0840 002 002Fabr. No. 041 Year of construction 1980Compressive force 18 KN = 1,8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 barprojection 100 mmram stroke 70 mmtable surface 245 x 200ram area 45 mminstallation height max. 235 mmClamping pin hole 20 mm with clamping screwCompressed air requirement 5 bar- Press force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger

Pneumatic press with foot-tripping

Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm

Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping

Pneumatic pin press for printed circuit boards

Pneumatic pin press for printed circuit boards

Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price

Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

max. pressure in kg: 6000

4 column press Tox MAg 008288A001 BJ 2016

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing