similar results found in category general inventory
Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.
Palletizer ACMI – mod. RASAR P 135 – automatic: Year: 2001 Producer: ACMI -MACHINE IN VERY GOOD CONDITIONS 1) Machine suitable for cartons and packs 2) Automatic pallet loading system 3) Aquifer system provides automatic 4) Perimeter protection 5) machine with wrapper robopack 2001 -MACHINE TOTALLY RECONDITIONED Code R 2
This machine is in an excellent condition. We can sale it as is or completely reconditioned. The machine has dust on top, but it is indoor, and it will be delivered like a new machine. We are experts in Decanters and Centrifuges with over 35 years of experience. Process liquid: Min. 0°C (32°F) - max. 100°C (212°F) Max. density of compact wet cake at max. bowl speed: 1.7 kg/dm Maximum main speed: 3075 Bowl length:2440 Bowl diameter: 575 mm Beach angle: 20 degrees Solids discharge type: 360°-type with 8 wear liners Bowl Material Duplex Bowl wear protection liner
Totally reconditioned vertical Alfa laval MAB206S centrifuge with stainless steel bowl, use for mineral oil, manual centrifuge for the expulsion of solids. +/- 10,000 l/h (Hydraulic) Engine 7.5 Kw 220/380 V 1430 Rpm.
Centrifuge manufactured by ALFA-LAVAL Model: MAPX 204 T-14-60 Totally reconditioned vertical Alfa laval MAPX 204 T-14-60 centrifuge with stainless steel bowl, self-cleaning centrifuge with partial and total discharges for the expulsion of solids. New electrical panel option. Hydraulic capacity: 3000 l / h. (Hydraulic) - Motor power: 2.2 KW - Max. of the drum: 5,500 rpm.
Filling machine ALFATEK 28 valves isobaric – 5.000 bph: Year: 2004 Producer: ALFATEK Speed (BPH): 5.000 bph Direction: Clockwise -RECONDITIONED MACHINE 1) Isobaric filler Alfatek 28 valves. 2) Complete of self levelling. Code T 10
Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...
Siebmaschine Vibration classifier workshopoverhauled Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips and sawdust) Drive power: 5.5 kW Suitable for the following screening materials: -Wood chips -Sawdust -Sawdust - Reclaimed wood -Bark # Screening machine oscillating screen workshop reconditioned Make: Allgaier Type: ARSM 33-7,5 Screening area: approx. 7.5 m² with 3 fractions Screening capacity: approx. 80 - 100 m³ / h with 3 fractions (for wood chips, sawdust) Drive power: 5.5 kW Suitable for the following screenings: - Wood chips - Sawdust - Sawdust - waste wood -Bark
Hydraulic Type Manufactured by Angelo Cremona Maximum Diameter 800 mm Minimum Diameter 120 mm
For sale : 2 pcs. the complete TEM-EVO cabinets (w/CPU 1247 3959 KZ) 1 pc. Operating terminal BRT 1247 3955 KZ 2 pcs. I/O-Controller module CMPS 1247 0960 KZ 4 pcs. I/O-Controller module CM16DI 1247 0962 KZ 4 pcs. I/O-Controller module CM8DO 1247 0963 KZ 2 pcs. I/O-Controller module CM16DO 1247 0964 KZ 8 pcs. I/O-Controller module CM8DIO 1247 0965 KZ 14 pcs. I/O-Controller module CM2AI 1247 0966 KZ
5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED
BARMAG EXTRUSION SPINNING MACHINE WITH 12 POSITION / 72 THREADLINES • FOR PET POY MICROFILAMENT • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm
1 X ABB CAT TURBO CHARGER. RECONDITIONED FOR CAT 3516C & 3520C Gas engine CAT PART NO: 254-0789
New, unused exhaust pipes from Beck in various variants For sale are high-quality exhaust pipes from the renowned Beck brand. All pipes are new and unused. The detailed measurements can be found in our attached PDF file. Features: Condition: New and unused. Brand: Beck - Quality you can rely on. Different variants: Available in different finishes to meet your needs. Metrics: The exact measurements can be found in our PDF file. If you are interested, we will be happy to send them to you on request. Contact: Do you have any questions or are you interested? We have premium ventilation ducts for sale from the prestigious brand Beck. All pipes are new and unused. Detailed measurements can be found in our attached PDF file. Product Features: Condition: New and unused. Brand: Beck - Quality you can rely on. Various Variants: Available in different configuratio ...
Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation
Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k
Cylinder head, Bergen BRM Lower OD 430 mm, upper OD 420 mm Draw. no. 528/15-1 Reconditioned Part no: 403690 Part no: 528/15-1
Depalletizer APE mod. DEPAL 2000 - year 2003 Monoblock BERTOLASO 32.32.6.4 with pre-evacuation, composed of: SBR rinser 32 clamps double treatment and mobile nozzles - year 2002 BERTOLASO gravity filler 32 valves with corker 6 heads natural straight corks - year 2002 BERTOLASO Screw capper 4 heads stelvin - year 2006 Capsuling machine NORTAN mod. PRISMA 8+8 - year 2002 Labeller KOSME mixed glue adhesive mod. ETRA FIX 1280 15T.S2.E3 + S3.E3 electronic cam - year 2002 case erectors APE mod. FORM 200 HMA - year 2003 Case packer machines APE mod. INCA 2001 - year 2003 Carton closer APE mod. CH 200HM - year 2003 Palletizer APE mod. PAL 2000 - year 2003 Wrapping pallet TOSA mod. 095 - year 2002 BERTOLASO Caps elevator for natural straight corks mod. ALX1 - year 2002 BERTOLASO Caps Elevator for screw stelvin caps mod. A500 - year 2006 Printer for cartoon print and apply adhesive ...
Isobaric monoblock BERTOLASO 75.15 for soft drinks Yaer: 1987 Speed: 25.000 BPH sul 0.33 L Isobaric filler 75 valves pitch: 113 mm Capper 15 heads for crown corks of 26mm diameter Galss bottles of 0.33 L Totally reconditioned
Filler isobaric BERTOLASO mod. SUPREMA 72 valves Year: 1990 (electrical system and safety protections completely reconditioned in 2016). Direction: Clockwise. Speed: 10.000 bph on sparkling wine. Many formats available. Dummy bottles. Machine function management via SIEMENS plc with touch screen operator panel. Safety protections to norm CE.
DAMET DS-3519-E Compressed Air - Carton Lid Stapler is hereby offered for sale. The items work perfectly and have been regularly maintained. -Tool Type: Pneumatic -Magazine capacity: 100 -Working pressure: 4.9 - 7.1 bar / 71 - 103 PSI -Air consumption: 1.13 liters per shot at 5.6 bar -Compressed Air Connection Thread Type: 1/4 BSP -Dimensions (L x W x H): 345 x 115 x 233mm -Weight: 2.45kg - Diameter: Min. 0.8mm / Max. 2.25mm -Length: Min. 15mm / Max. 19mm -for the following staples: 35 / JK560 / Prebena B / BeA Packfix A / Senco XB Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise st ...
Milling Machining unit BSI UR 140 Centre height 80 mm Spindle SA40 Speed 3500 RPM max. Year of construction 11/1998 Various Full reconditioned in 2013 (not mounted since 2013) Voltage 380 V Length 600 mm Width 210 mm Total height 380 mm
USED connecting Rods for CAT 3516. Very good condition and can be reconditioned and used again. email for price & delivery In stock in UK and available immediately
WINDOWS PRODUCTION PLANT - CELASCHI CLOCK121/BA-30/PA24-42+CS year of manufacturing 2000 CE standard productivity up to 60 pre-finished single sash windows / single shift dimension of installed plant: 30x10 meters working line composition: 1) four-side moulder (NOT INCLUDED) 2) Z-shape traslator 3) conveyor belt 4) single-side tenoner machine CLOCK 121 5) downloading belt 6) U-shape traslator 7) mortising machine BA 30 8) conveyor roller 9) sanding machine (NOT INCLUDED) 10) Z-shape traslator 11) double profiling machine PA 24-12 + CS 12) downloader belt 13) electric cabinets complete set of tools available in addition plant recently dismantled by Celaschi technicians, ready for shipment video of running machine and layout available on request
Filling monoblock CERMA 20.20.1 Year: 2000 Speed: 2.000 bph on sparkling wine 3.000 bph on still wine. Direction: Anticlockwise. Rinser 20 clamps Single treatment. Fixed nozzle Filler 20 valves – isobaric Pre-evacuation Degassing Corker single head AROL: Natural straight cork Mushroom cork. Safety protections. Totally reconditioned (2016)
Reconditioned Christy Turner Pulverizer complete with new full set of ADI liners and hammers installed, the machine has been well maintained and runs like new. Comes with a lot of spare parts including hammers, shafts, spacers, some ADI liners and a completely reconditioned spare main drum complete with mounted bearings.
SECOND-HAND SPRAYING ROBOT CMA MOD. ROBY 5EXG - n. 5 working axis - n. 3 supports - wrist capacity 3 kg - matr. 155/00 - CE rules (year 2000) - COMPLETELY RECONDITIONED 2016 - self-teaching programming Carousel movement servo-controlled Number of arms 3 Arm weight capacity 25 kg Piece turning device Movement servo-controlled and synchronized
manual casemaker CMC LPA (machine like CMC Q-cover 1) format: max 50x70cm; min. 12x15 cm Machine comprising of: - Gluer suitable for use of warm and coldglue (PVA) - Vacuumtable with spotting guides for 1-3 boards - Edge turning in device (1 side) - Niproller press - Delivery table machine is reconditioned in 2016 Available: immediately/sofort
Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm
Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D ob ...
Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Conside ...
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produ ...
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new co ...
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis and the prov ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D ...
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Consideri ...
For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...
Corona Pull Roll Station 1 Primer Coater & Dryer 3 Extruders (with QSE Adapter, extrusion Do, Die, Gravimetrics 3+1) Auxiliary Unwind with splicing unit shafted desi! Laminator Edge Trim Razor Blade Beta Thickness Gauge PROTAGON Corona with Nip Station 3 Edge Trim Shear Cut Centre Slit&Spreader Ro Automatic Splicer Two direction Rewind Shafted Design Typlcal substrates: Paper:20 - 150 g/m2 Aluminium :6,35 - 25 μm PE:40 -120 μm BOPA: 15-50 μm BOPET: 9 -50 μm (smooth and metallised) BOPP: 15- 50 μm (smooth and metallised) Nonwoven PP: optional The extruder or extruders of the extrusion sta· motorized carriage. This carriage with a 3-\i UP/DOWN,LEFT/RIGHT and IN/OUT travel. The extruder carriage consists of: guide frame 4 wheels. Height adjustment traveldrive Side adjustment Control cabinets EXTRUDER A Screw diameter: 114.3mm (4.5 inches) Screw ...
Used metal cabinets for storage of gas cilinders design for installation in warehouse/workshop. price €220 each
Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots
Complete system with all accessories required for installation and operation, see below!Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / minXua2eg8fxRotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filterAll BWF fixators for installation of machine bed and panel
Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.
Reconditioned Hotmelt Slot Nozzle machine for coating and laminating of various substrates. Winding/Unwinding on request. Overhauled, new Hotmelt slot nozzles - coating and laminating system. Up- and downwinding systems on request.
General SKU072Y445 LocationBarneveld MakeDrais TypeT-630 No.45988 Year of construction1973 Main Features MaterialMild steel Volume630 Ltr. Motor24 KW Specified Features - Powder turbo mixer MaterialMild steel Powder turbo mixer(1x) T-armscheck Capacity630 Ltr Trough sizesdia. 900x1000mm Top connectionsdia. 195mm + 2x dia. 70mm Inspection hatch400x600mm (top side) Outletdia. 200mm With adjustable packing glandscheck Motor16,0/24,0 KW, 380 Volt (Ex) Speed mixing shaft62,5/125 Rpm Information Floorspace3,1x1,7 M Total height2,0 M Weight2100 KG ATEX compatiblecheck Extra Specifications-- RECONDITIONED -- ReconditionedPowder turbo mixersDraisReconditionedMixers > Powder turbo mixersBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...
The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / m ...
Glue labelling mahcine ETICAP SYSTEM - 10 heads Year 1997 – Reconditioned in 2009 Labels: Neck Front Back L” seal Speed: 5.000 BHP Clockwise direction Additional ironinig on conveyor Speed adjustment with potentiometer and inverter
Unique FIGARO hairdressing equipment in wholesale offer – style, quality and comfort all in one! Dealer purchase value of approx. 180,000 € - sales value 300,000 € Discover the unbeatable range of high-quality hairdressing equipment from FIGARO – your reliable partner for stylish and functional salon furniture. With a total of 5 truck trains of brand new, original packaged goods, we offer you a comprehensive selection of hairdressing chairs, saddle stools, mirrors, rolling stools, cosmetic tables, wax heaters, drying hoods, ozone steamers, waiting benches, system workstations, wall showcases and much more. Why choose FIGARO? Exclusive Design: Every piece of our hairdressing facility embodies timeless elegance and modern design. Stand out from the competition and impress your clients with a stylish salon. Highest Quality: FIGARO stands for quality, and this is re ...