used Grinding Machines for sale

Cylinder Head Grinding machine BEM MULLER type 2668-63 Travel: 500 mm Table: 900 mm x 320 mm Max height wheel/table 500 mm Delivered with tilt mounting (see picture) Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 1100 x 2000 mm Weight: approx 2 T

Cincinnati Grinding Machine 2 Technical Details Type of machine: 60" x 240 Year of Installation: 1954 Dimensions Distance between centers: 240" (6096 mm.) Max. working diameter with new stone: 60"(1524 mm.) Max. allowable workpiece weight: 58967 Kg. (58.967 T) Stone Dimensiones: 36”x4”x20”(914x101.5x508mm.) Stone Speeds: 300 ̴ 700 Rpm Drive Head Spindle Speed: 0 ̴ 35 Rpm Longitudinal Slide Motion Feeds: 400 ̴ 2520 mm/min. Rapid movement: 2520 mm/min Cooling Devices Liquid capacity in the tank: 2568 liters                                                                                                                                                 

VERTICAL - POT GRINDING MACHINE DELTA LF350 Cgvnbqkquz Control - Conventional Grinding length approx. 360mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2850 rpm Drive power approx. 3 KW Grinding Movement / Right - Left / Manual Z - Delivery - Manual Accessories: Magnet Wet grinding device Machine housing Documentation Puller Grinding wheel Fine adjustment Z - axis Dimensions: LxWxH approx. 1x1x1.8 meters Weight approx. 600Kg

Discus Werke DSH 600/1000 Side Surface Grinding Machine This type of machine is a machine with a motor-driven grinding spindle. The clamping and grinding of the workpieces is carried out with clamping devices tailored to the respective work. The devices are attached to the machine bed. The column saddle on which the motor spindle is mounted serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side Surface Grinding Machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 liters Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of construction: 1964 Condition: used The side surface grinding machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure,  ...

Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'

Ref.Nr 00682 Designation of the machine grinding machine / calibration machine Manufacturer Ferrari & Cigarini s.r.i. Model Calibratrice Built in 2012 Current Use To Grind Flow Surface or reduce the height of the workpiece 67.9 kW 400 V- 50 Hz 3 + 6 Bar 4700 kg Delivery date by appointment

Ref. -No.: 10332Manufacturer: GEORG MüLLERYear of construction: 1969Type of control: KonventionellControl: N/AStorage location: HalberstadtCountry of origin: GermanyMachine length: 1200 mmMachine width: 800 mmMachine Height: 1800 mmGrinding height: 120 - 200 mmMax. Grinding length: 310 mmGrinding Width: 175 mmTotal Power Requirement: 2,8 kWWeight Of The Machine Ca.: 0,4 tGrinding head adjustment (vertical): 165 mmMax. grinding head infeed: 12 mmmagnet clamping surface: 250 x 150 mmGrinding wheel dimensions: 170 x 100 x 76 mmGrinding spindle - speed: 2850 RPMGrinding spindle drive: 2,2 kWDrive motor power: 380 V

Manufacturer GER Model CM 2500 CNC Year 2000 CNC FAGOR 8055 Characteristics Distance between centre 2.500 mm. Centre height 300 mm Max grinding diameter 595 mm. Max weight between centers 2.000 kg. Max weight grinding on air 350 kg. Longitudinal movement Max programable speed 6.000 mm/min. Min programable increase 0.001 mm Cross movement Max.programable speed 6.000 mm/min Min programable increase 0.001 mm. Various Max. grinding wheel size Ø 500/80 mm. Grinding wheel Cutting Speed 45 m/s Parts Holder Centre Cone C.M.6 Centre Cone Tailstock C.M.6 2 Steady Rests INCLUDED Machine weight 12.000 kg.

Technical Details Machine Model: WS 450 Year of Manufacture: 1959 Year CSH began operation: 1986 Dimensions Space required: 12 x 5 m. Distance between centers: 5m (196 in.) Dia. Min. working dia. with new stone: 50 mm. (2 in.) Max. Max. working dia. with new stone: 900 mm. (35 in.) Max. allowable weight for the working plate: 14.000 kg. Stone Dimensions: 750 x 80 x 305 mm. Speeds: 350 ̴700 Rpm Drive Head Spindle Speed: 6 - 18 Rpm 16 - 48 Rpm Longitudinal Carriage Feeds Feeds: Range 1: 40 - 400 mm/min. Range 2: 265 - 2650 mm/min Rapid traverse: 2650 mm/min Cutting Feed Rate Control for Grinding Rapid traverse: 175/350 mm/min Fine cutting adjustment: 1 graduation Cooling Devices Liquid capacity in the tank: Approx. 3586 liters

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg ...

specifications: - maximum grinding length 360 mm - maximum grinding width 155 mm - maximum installation height 280 mm - Grinding wheel stroke approx. 240mm - Clamping area 400 x 160 mm - Magnetic clamping plate 300 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet loop fitting - Drive 400 V / 3 kW - Space required approx. W 850 x H 1700 x D 950 mm - Weight approx. 550 kg

Used 4 flanges fit on a JUNG, HF 50 (R or RD) Scope according to pictures ! ( 4 flanges , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HF FeinfräÃ? & - grinding spindle, manufacturer Fischer Schaffhausen. Designation; MFVS 830, Series number: EL-S-007 The spindle is undamaged, unused and in their original packaging. The spindle can be used with electrodes and-precision Strausak type. 82 CNC. or as RF - internal grinding spindle. Tech. Data.: 220 V 600 HZ 4-pin 2.5 KVA 1.4 KW / 600 HZ for further information: The grinding technology: Tool &-profile grinding coarser has in 2001 of the production & - Strausak license rights wage purchased. The rights include the complete series 57 U/W, 57 U CNC, 57 W CNC 3.-4.u-5-axis, and from this all developed machines.

Article number: 14-10-059 Manufacturer: Kugel Müller Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1968 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Documentation  Grinding wheels – protection  Splash guard – enclosure Other accessories on request Price and other technical data on request

Article number: 14-10-053 Manufacturer: Kugel Müller Very good general condition Machine in need of repair Shipping time: All rights reserved. Year of construction: ca.1988 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Documentation  Grinding wheels – protection  Splash guard – enclosure  Interior coolant device  Head cover New Other accessories on requ ...

Article code: 14-10-061 Manufacturer: Kugel Müller Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Grinding wheels – protection  Documentation  Pull-off device Other accessories on request Price and other technical data on request

offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

MADORA SB 1300X2500 aluminium grinding machine was built in 2018 in Poland. A highly reliable machine designed for a wide range of finishing operations i.e. deburring and edge rounding, achieves excellent machining results on the entire surface of the ground workpiece. For surface finishing of workpieces with a maximum thickness of 50 mm, the machine uses a 1300 mm wide technical fleece cylindrical grinding wheel with adjustable oscillation. The SB 1300X2500 aluminium sheet grinding machine is operated via a TFT control panel, which allows, among others, to adjust the machining thickness and change the feed speed of the gantry. The total weight of the machine is 2870 kg. Technical data of the MADORA SB 1300X2500 deburring machine - work table surface (L x W): 2500 x 1300 mm - maximum workpiece thickness: 50 mm - minimum workpiece thickness: 0.5 mm - feed rate: 0,5-2 m/min - numbe ...

Table size Dimension table | Tischgröße 280 x 610 mm Axis | Axis | Achse X 450 mm Y 280 mm W 320 mm Z 90 mm Spindle speed Spindle Valocity | Spindeldrehzahl 40,000 rpm Year / Year of Build 1984

Grinding Machine make ROSA model RTRC 1200 used machine in excellent condition Dimension table 1350 x 450 mm Dimension magnetic table 1000 x 450 mm Overhauled on 2001 by Rosa Armando spa . Price on request

Gear grinder machine 5A841, Stanko, with change gears

Supra pot grinding machine - Width: 400 mm - Depth: 400 mm - Height: 800 mm - Table diameter: 150 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

Specifications: - Flexible shaft 1500 mm - infinitely variable speeds 1000 to 12000 rpm - Drive 380 V - mobile underframe - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg

3B161 shaft grinding machine built in the USSR, performs machining of rotating surfaces with high precision and quality along the entire length of the grinded workpiece. Distinguished for its exceptional reliability, the machine uses a large grinding wheel with a diameter of 500 mm, which is driven by a reliable 5.5 kW spindle. The XC3 3B161 grinding machine, thanks to its combination of a grinding wheel and claws with 1000 mm spacing, allows a significant reduction in machining time while maintaining high productivity. The shaft grinding machine weighs 4850 kg. Technical specifications of the 3B161 grinder - maximum workpiece length: 1000 mm - maximum workpiece diameter: 300 mm - grinding wheel diameter: ø 500 mm - maximum grinding wheel width: 60 mm - minimum grinding wheel width: 30 mm - grinding wheel spindle drive power: 5.5 kW - guaranteed elementary interval: 0.005 mm  ...

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Article code: 14-10-066 Manufacturer: Cup Grinding Machine Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 600x600x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 300mm Grinding width: approx. 300mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Grinding wheels – protection Other accessories on request Price and other technical data on request

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Weipert Crankshaft Grinding Machine Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 4300 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Weipert Crankshaft Grinding Bench Grinding Machine Weipert Grinding lathe Machine length: 4900 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Weipert W 500e Crankshaft Grinding Bench Weipert W 500e Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 5200 mm YOC 1967 Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Gear grinding machine ZSTZ 500x10 with change gears.