Round Grinding Machines used for sale (77)

1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump

Auction-ID: A1-47470-181

Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg

Working rangeCenter width: 1,100 mmGrinding length: 1,000 mmCenter height: 200 mm X-axis: Distance: maximum. 400 mmresolution measuring system: 0.0001 mm Z-axistravel: max. 1,070 mmSpeed: 0.001 - 12,000 mm/minResolution measuring system: 0.0001 mmGrinding headstock: Grinding spindle motor: 7.5 kWReadjustment grinding wheel circumferential Speed: automaticWorkpiece headstock: Speed range: 0 - 500 1/minSpindle passage: 30 mmTailstock: hydraulic control with foot pedalStroke: 50 mmFine adjustment: ±1.5 mmControl: Siemens 840 Dsl with GP, grinding software/grinding modulesAir pressure: 6 barWorkpiece weight: max. 500 kgGrinding wheel diameter: 500 mm, right with control cabinet, wiring diagram: SE 5841.500 serial number: 4-1006708223, cooling Hyfra WWK-21/1-2.Transport dimensions: 3200 cm long Auction-ID: A1-48199-1

Inv. Num. : 9121 Type: S30 lean PRO Producer: Studer Created: 1999 Parameters: Switch-on hours: 47550 h Tip stroke: 175 mm Maximum weight of the workpiece: 130 kg Distance between tips: 1000 mm Machine height: 1900 mm Machine length: 3800 mm Machine width: 2100 mm Machine weight: 6000 kg Equipment: Technical documentation Internal grinding Suction 2024: Motor winding and replacement of the hydraulic valve

Spacing of the toes: 400 mm; tip height: 175 mm; maximum grinding diameter: 350 mm; Piece weight: up to 80 kg between the ends / 120 kg in the air; X-axis: stroke 300 mm; Z-axis: stroke 485 mm; resolution 0.0001 mm; Studer patented preloaded hydrostatic guides; grinding wheel Ø500 x 63 mm, bore 203 mm; 7.5 kW grinding wheel spindle motor; wheel speed 1,400 to 3,200 rpm; Grinding headstock orientation ±8.5°; workpiece doll with ISO 50 / MT5 cone; workpiece speed 1 to 1,000 rpm; CM3 tailstock, sleeve stroke 80 mm, sleeve diameter 50 mm; GE Fanuc Series 16i-T numerical control; Faired machine with filter unit and separate control cabinet Auction-ID: A1-47716-20

Machine no. 2037.04 See photos !

Studer RHU 450 universal cylindrical grinding machine. Conventional hydraulic precision machine, distance between tips 450 mm. Swiss made. Equipped with an external grinding wheel, tailstock and sprinkler system. Used condition. Auction-ID: A3-43553-38120

Center height 175 , Center width 700 , Inclined position of rotary table 10° , Workpiece headstock swivel 90° , Speed range 30-675 rpm , Morse code 5 ,grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW

Technical data Manufacturer: TSCHUDIN Grenchen Model: HTG 310 Machine Type: Universal cylindrical grinding machine Machine number: 85 1083 Center height: 100 mm (Source: online) Tip height with elevation: 150 mm (Source: online) Center width: 310 mm (Source: online) Max. sanding length: 340 mm (Source: online) Grinding diameter: approx. 200 mm (Source: online) Grinding wheel diameter: 350 mm (Source: online) Grinding wheel width: 50 mm (Source: online) Grinding wheel bore: 127 mm (Source: online) Workpiece spindle speed: 50–500 rpm infinitely variable (Source: online) Table swivel: ±11° (Source: online) Total power requirement: approx. 4.5–5 kW (source: online) Machine weight: approx. 1700 kg (Source: online) Configuration Heidenhain Digital Display X/Z Coolant Setup Machine Light Workpiece spindle swivel 360° Grinding wheel mounted Additional grinding wheels available Universa ...

1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of Make: 2001 CNC control: Siemens 840C Bore machining range: 150 mm Maximum workpiece depth: 100 mm Largest external processing area: 150 mm Largest swing diameter over table: 310 mm Workpiece spindle speeds: 0 – 3000 rpm. X-axis table lifts: 1050 mm Z-axis: 300 mm Infinitely adjustable feed speed: 0.01 - 10 mm/min Stroke-dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 to.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N- B-Achse- Kel-Set- hydraulischer Pinolenrückzug- Mikroverstellung am Reitstock- Werkstückspindelstock mit schwenkbarem Unterteil- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, P ...

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 1500 mm, 175 mm

1 Outside – Cylindrical Grinding Machine Make: Fortuna Model: F 13 S Year of Make: 1980 Grinding length: 1500 mm Tip height: 175 mm Grinding diameter: 350 mm Grinding wheel diameter: 500 mm Equipment / Accessories: Lynettes Various grinding wheels Coolant Setup Paper Belt Filter

grinding diameter: - mmgrinding length: - mmcentre height: - mmdiameter: - mmlength: - mmtool adaptor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Studer S20 cylindrical grinding machine

3 stages, 380 V 50 Hz Connected load: 10.5 kVA Rated current: 16 A Auction-ID: A7-47753-50

These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive

grinding diameter: 155 mmgrinding length: 400 mmcentre height: 80 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. Cylindrical grinding machine, Fabr. Cincinnati, Type R 75, Built in 1971 Tip height 130 mm Grinding length 760 mm Spindle bore 38 mm Grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. Max. Grinding spindle can be swivelled twice

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmcontrol: Fanuc iT workpiece weight: 100 kgtravel -z axis: 1150 mmmeasuring system resolution capability: 0,0001 mmrapid traverse: 12 m/mintravel -x axis: 320 mmrapid traverse: 6 m/mintable - swivable: 0-90 Gradgrinding wheel size: 400 x 63 x 127 mmb-axis indexing accuracy +/-: 1 °spindle motor: 6 kWspindle turning speed - stepless: 800 - 1900 U/minworkpiece turning speeds: 0 - 800 U/mingrinding head swivelling: -10 / +100 Gradtail stock: taper in tailstock MT: 4 tailstock quill stroke: 48 mmtotal power requirement: 16 kWweight of the machine ca.: 3,6 tdimensions of the machine ca.: 3,0 x 1,0 x 2,15 m3-axis cylindrical grinding machine equipped with:- CNC control FANUC i-T- B-axis (head rotation -210/+10°)- Movomatic - Dresser on table- Coolant belt filter system- Grinding wheel flange/discThe data for this ad was cr ...

Key data: 450 mm, 1500 mm, 225 mm

Stock number: 3995 CNC CYLINDRICAL GRINDING MACHINE Manufacturer: KELLENBERGER, Type: KEL-Varia 225 - 1500 Machines NO.: 650533, Year of manufacture: 2002 Specifications: Grinding length 1500 mm Gr. grinding diameter 450 mm Z-ash 1650 mm X-ash 320 mm Caschen 0.001 degree B ash 0.001 Large stone diameter 500 x 80 x 203.2 mm Control Heidenhain 1830 m Fabr. Accessories: Cooling water system. Grinding hubs 2 pcs Weight: 6000 kg

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmControl: Fanuc 310is total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control GE Fanuc 310isHand panel for CNC control GE FanucWenger loader optionalTurned part with automatic indexing 1°Grinding head UR 1-2-3Grinding wheel equipment left 500 x 80 mmGrinding wheel equipment right 400 x 63 mmOperating unit for one high-speed internal grinding spindle MFV / MFZHigh-frequency internal grinding spindle MFN 1090Coolant supply through the workpiece spindleDressing unit on the upper tableSwivelling holder for PCD diamond platesBasic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devicesKEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URSKEL-TOUCH on the workpiece headstock for internal and external grindingPreparations for Movomatic ESZ 400 or M ...

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: mVerkauf erfolgt mit FunktionsprüfungAuf Wunsch mit neuer Tischgeometrie gegen AufpreisC-Achse zum PolygonschleifenB-Achse mit HandschwenkungSchleifscheibendurchmesser links 400mmSchleifscheibendurchmesser rechts auf AnfrageInnenschleifeinrichtungReitstock mit FeinverstellungThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various flanges

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmControl: Kelco 90 total power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: mVerkauf erfolgt mit FunktionsprüfungAuf Wunsch mit neuer Tischgeometrie gegen AufpreisB-Achse stufenlosSchleifscheibendurchmesser links und rechts 400mmInnenschleifeinrichtungReitstock mit FeinverstellungSinuslineal am WSSKel-SetPassive Lämgspositionierung Movomatic TMP91The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm

grinding diameter: 350 mmgrinding length: 1500 mmcentre height: 175 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ± 6 °longitudinal feed of the table: 1750 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 80 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 5,6 x 2,0 mKomplett überholt mit Umbau auf Technik der modernstenAusführung.-Neuer Schaltschrank-Modernes Hydraulikaggregat-Moderner Werkstückspindelstock-Moderner Reitstock mit Feinverstellung-Moderner Steuerblock,Zustellung,Getriebekasten-Innenschleifvorrichtung für Spindeln mit 80mm Durchmesser- ...

We have stored an associated coolant system Knoll type VRF 450/2250 (built in 1997) at a freight forwarder, so it is not on the pictures. The machine is fully functional and is available immediately.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCompletely overhauled in 2013Heavy duty workpiece headstocktailstockWithout chuck and without bezel in the photoKelco 90 controlThe machine can be viewed in operation at the customers premises from 2025 up to and including January 2026.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7323 Type: BUAJ 30 Producer: Junker Created: 1999 Parameters: Table dimensions: 1380x160 mm Distance between tips: 630 mm Machine weight: 2800 kg

grinding diameter: 630 mmgrinding length: 3000 mmworkpiece weight: 2500 kggrinding wheel diameter: 750 mmvoltage: 400 VControl: total power requirement: kWweight of the machine ca.: tTable Swivel 5° - 0° - 5°Internal Grinding AttachmentMarpossSteadiesDresserCoolantThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solu ...

Grinder Schaudt BHU 40A Swing diameter: 400mm Center distance: 630mm The technical data can be found in the pictures. approx. transport dimensions and approx. weight: 3.5m x 2m x 2m, 3,500 kg Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is in pristine condition. You can make an appointment for a viewing at any time. We'd love to hear from you.

grinding diameter: 250 mmgrinding length: 650 mmcentre height: 125 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wird mit Wartung und neuer Geometrie verkauftBetriebsstunden bisher 12260Reitstock mit FeinverstellungSchleifspindelstock schwenkbar mit 5° HirtverzahnungPapierbandfilterMarposs MesseinrichtungInnenschleifeinrichtungThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

grinding diameter: 850 mmgrinding length: 4.000 mmcentre height: 525 mmworkpiece weight max. betw. centres with steady: 5.000 kgcontrol: SINUMERIK 840 D Feeds & travels: - feed Z-axis: 0,01 – 6.000 mm/minfeed X-axis: 0,01 – 6.000 mm/minTravel Z-axis (table): 4.500 mmTravel X-axis (grinding spindle): 650 mmGrinding wheel: - Max. Dimension: Ø1.060x60x304,8 mmgrinding wheel speeds: 1.100 min-1peripheral speed: 45 m/secpower: 22 kWtail stock: - Taper: MK 6 quill travel: 100 mmdiameter of quill: 115 mmWorkpiece spindle: - Taper: MK 6 Speed range workpiece: 10 - 120 min-1torque of the drives: 41,5 NMcontrol: total power requirement: 52 kWweight of the machine ca.: 25,5 tEquipment & AccessoriesCNC cylindrical grinding machine in most robust design for heavy workpieces• Scope of geometric retrofit:• Slideways of X- and Z-axis regrinded, intermediate table and top table regrinded  ...

Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±8 °longitudinal feed of the table: 1300 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 4,2 x 2,0 mNeu geliefert an Universität. 2018 übernommen.Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert.Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt.2-Achsen-Digitalanzeige Fagor nachgerüstet.-Reitstock mit Feinverstellung-Innenschleifeinrichtung-Kühl ...

Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW

centre distance: 2.500 mmcentre height: 250 mmgrinding wheel diameter: 600 mmTotal travel of the grinding support: 320 mmspindle speeds: 50 - 450 mmtool adaptor: MK5 tail stock: MK Cylindrical Grinding Machine | NAXOS-UNION - W-500the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation).The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: W-500-2500 | W500 | W 500 | W 500 2500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peak height: 160 mm Tip width: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm electr. Connection: 380 V kW Space requirement: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg

grinding diameter: 390 mmgrinding length: 650 mmcentre height: 200 mmtotal power requirement: 46 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 3x3x2,4 mUniversal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mmEMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers theright solution for virtually every user.--> Technical data Max. grinding length: 650 mm--> Centre height: 200 mm--> External grinding diameter: 1 – 390 mm--> Max. weight flying MK4: 100 kg--> Max. workpiece weight between centres: 250 kg--> Feed:--> X-axis travel: 480 mm--> Z-axis travel: 1.150 mm--> Workpiece headstock--> Tailstock--> Grinding spindle headstock--> Coolant device, manufacturer HYFRA,--> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012,--> Oil mist filter, ...

Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

grinding diameter: - mmgrinding length: - mmcentre height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

internal diameter: 99999 mmgrinding depth: 99999 mmswing diameter: 99999 mmgrinding diameter: 99999 mmgrinding length: 200 mmcentre height: 175 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC internal grinding machineB-axis 4 x 90°Q-axis for adjusting tapersUsed with minor maintenance2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm1 external grinding motor spindle Fischer MFVS1407 7,000 rpm-Pneumatic power clamping device with 20mm stroke-Dressing device with 2 swivelling arms, hydraulically foldable back-Grinding detection ring sensor Dittel on the workpiece headstock-Passive grinding detection with magnetic base-Paper belt filter 375 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

grinding length: 160 x 400 mmmechanical: ja weight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.