other automation equipment used for sale (4,339)

Electronics ModuleSCHNEIDER, AEGBKF102Modnet 1/IS Master6065-042.703 580New !Dimensions(Package): 290 x 200 x 50 mm

Shock absorberENIDINEOEM 1.25Mx2stroke: 50 mmrod: Ø 9 mmdamper attachment:: Ø 25 mmsensor may be defective !Dimensions: 215 x 75 x 70 mm

Spring-balancedBOSCH0 607 454 224 ( 0607454224 )3.4 Nm640 rpm6.3 barbalancer: TECNA 9200load capacity: 0.4 - 0.8 kgextension: 1,350 mmused, tested !Dimensions: 320 x 230 x 150 mm

Variable regulator

2 x 0.6V per revolution per min. I max. 2 x 0.09A V max. 10000 revolutions per min.

5 power dimmers 5 Regulator Photo on request Picture on request

Rittal PS 4806 Modular enclosure Product Modular system PS 4000 Manufacturer: Rittal Clamping system: PS 4000 Model No.: PS 4806 Housing frame: sheet steel 1.5 mm Roof: sheet steel 1.5 mm Door: Sheet steel 2.0 mm Rear panel: sheet steel 1.5 mm Mounting plate: sheet steel with zinc coating 3.0 mm Floor plates: sheet steel 1.5 mm Housing frame: dip primed Door, roof and rear wall: dip-primed Powder-coated exterior, textured paint Colour: RAL 7035 4 transport eyelets Wiring diagram pocket made of sheet steel 4118000 Swivel frame, large 19" 44 U Plinth system as a stable cabinet base Control cabinet cooling unit SK 3296100 Dimensions (HxWxD) 2500 x 800 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Areva Teleperm XS Control Cabinet Standard body technology For the construction of Teleperm XS systems, Control cabinets of type SC 9422 (2200 x 900 x 400 mm deep), protection class IP30, are used. The cabinet is equipped with cable interceptors with umbrella rail. The cabinet is designed for seismic loads. Cable entry and power supply is generally done from below. In the standard cabinet, the subracks are mounted in the middle area. To the left and right of this are areas for mounting cabinet connection elements and transceivers. Terminals are used to connect peripheral cables. Other connection technologies such as Maxi-Termi-Point are also possible. Field cables are to be shielded with wires twisted in pairs. Buses are implemented inside a cabinet via conventional cables, outside the cabinet via fiber optics. Teleperm XS is suitable for systems with surface earth ...

Siemens SPPA - T2000 Automation Cabinet Guidance system and cabinet structure SPPA - T2000 AS 620B R903 Siemens 8 MF Cabinet SPPA FUM R Standard Cabinet 6DP2623-1GG10-0XX0-Z Siemens SPPA - T2000 8 MF Cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross bandage Parts set for earthquake strengthening front and rear Double doors 2 x Partition Transport eyelets Cabinet indicator light Height × width × depth: 2200 × 900 × 400 mm Protection class IEC60529: IP20 Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central part subrack: 1 x red. AP FUM-B-BGT : 3 x EU 903 subracks with 2 x Profibus connection IM616 and I&C monitoring with 1 x Fum210 Sys 36 fuse slots Colour: RAL 7032 Assembly designation Fum210/6DP1210-8BC Teleperm XP Binaer Assembly Profibus Connection Interface Module IM616 ...

Wabeco screwdriver with industrial screwdriver Fein AS sd 715-1 Industrial screwdriver: Fein AS sd 715-1 1000 rpm 42 V / 40 W / 1A Foot control by Hans Bernstein The hand lever is used to guide the industrial screwdriver upwards against the spring, hold the screw in position, release the lever and start the rotary movement with the foot switch. Due to the spring pressure and the dead weight, the screwdriving process is carried out without manual effort.

Industrial Screwdriver Fein AS sd 715-1 Data Industrial Screwdriver - Stick Wrench ASsd 715-1 Fein Elektronik ASsd 715-1 With transformer 42 volts / 40 watts, 1.0 A, 1000 rpm, Right/Counterclockwise Rotation (only screws on pressure)

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...

Selling Proposal  DESIGNATION REFERENCE QUANTITIES SIEMENS SIMATIC S7-300 PLC 1 SIEMENS SM321 4 I/O BOARD SIEMENS SM322 I/O BOARD 4 FUSE DISCONNECT SWITCH WOHNER LTS-2 3 FUSE DISCONNECT SWITCH WOHNER LTS-000 3 VOLTAGE REGULATOR ROWAN ELETTRONICA 310 S.C/6M 3 EMERSON SP 1406 25 DRIVE EMERSON SP 2401 2 DRIVE

MSC, MULTIVAC, Terminal-T, Tochscreen

Machine type: Spiral conveyor incl. roll embossing machine Manufacturer: Püschel Year of construction: unbek. Condition: used / untested Offer will only be sent if a complete imprint is provided! Price 950 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-PÜS-0124 DESCRIPTION We offer you a used spiral conveyor including roll embossing machine from the manufacturer Püschel. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Conductivity/MOhm transmitters for inductive and conductive sensors in the field housing. Degree of protection IP 65. Operation with menu navigation and Communication display. Signal outputs: 0/4..20 mA for conduction Ability and temperature, 2 output Contacts. Continuous polarization compensation. Adjustable: Monitoring of the USP limit, concentration measurement of customer-specific media, Characteristic curves for current outputs.

Sigmatek CDI 163 C-DIAS digital bus module input module. Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.

Sigmatek CDD082 C-DIAS digital bus module dot-matrix control Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. Feel free to call us.

Sigmatek CAI024 C-DIAS digital bus module - analog input module. The device was temporarily used under favorable conditions in a test station, hardly used, mostly for testing the software when setting up new systems. Price per piece. Invoice with VAT We may be able to assist you if you have any uncertainties about the software (e.g. if the software monitors the serial number). Feel free to call us.

Light barrier, light grid, PSEN op4F-A-14-090/1, 631004, Pilz, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € _____. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Siemens COROS OP15-C1 6AV3515-1MA20

OPERATOR PANEL PCS 900 Serial No.: 900-V02930 N5 Version No.: PG 900.202.6 060695 +24V DC +/-20% 20VA

750-841,750-474,750-430 (5x),750-461,750-602,750-530(3x),750-600(2x),750-614 ,/50-404 1000 003(2x),750-404 1000 004(2x),750-602

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

The surface inspection system is used for 100% control of films. It detects, classifies and logs optical errors with an uplight illumination (top plus bottom). - Modular architecture - Optimal lighting technology - Process synchronization - Real-time error analysis - Automatic error marking / label control - Different error views Circumference: - 2 inspection stations Each 2 x High Speed 80 MHz CCD line scan camera with 4096 pixels (18,000 scans/sec.) Lens adapter, lens, mounting kit and workstation software - Lighting 2 x high-clocked illumination fluorescence with cylindrical lens 2500 mm - Inspection frame - FSP 600 Server

Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.

air bearing high precision bearings Brand: Drevetti Regman Dimensions: 95 x 45 x 15 mm

For sale we offer a measuring and weighing system for packages from Bedal. It is a perfect system for all package acceptance or shipping. It can be used for example.B: In shipping at industry, wholesale or e-commerce, fulfillment service providers (e..B. forwarding agents, logistics), or at parcel reception points (e.B. courier services). Package dimensions: Min. BxWxH 10x10x4 cm Max. BxWxH 43x41x48 cm undressed max: LxWxH 75x41x48 cm Tolerance: LxWxH 1.0 x0.5 x 0.5cm Weight: 0.25kg: 0.05Kg (50g) / 25-32kg : 0.075kg (75g) Parcel Kiosk is an economical solution for weighing and dimensioning packages. It is certified by the international organization OIML. Automating packet measurement improves efficiency and saves resources. Thanks to the Parcel Kiosk system, you can be sure that accurate weight and dimensions are read and that your company is protected from errors an ...

TO WHOM IT MAY CONCERN ; WE VE NEW - UNUSED ABB SYNPOL D CMA 130 3DDE 300 410 AT OUR STOCK PART NO 7049 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY