paper converting: other used for sale (292)

Manufacturer: Pitney Bowes Model: DI 425 Condition: used Find more here - / Contact us at -

Manufacturer: Xerox Model: Impika Compact Condition: Used Find more here - / Contact us at -

Manufacturer: Xerox Model: Impika Reference Condition: Condition Find more here - / Contact us at -

Year of manufacture 1985 Paper Drilling Machine 4 drilling spindles Sliding table electr. Foot switch incl. base Price on request. We deliver and install worldwide!

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

Producer : Windmöller & Hölscher Type : QMS 8510 dismantled and stored Colours : 4 colors, CI With doctor blades Print width : 800 mm Repeats : from 23 – 80 cm There are approx. 300 air sleeves with the machine - size unknown Speed : 150 metres/minute Un-/rewinder : max. 1.000 mm With length slitting Cliché is 2.84 mm thick Find more here - /

Hunkeler HL6 laser perforator The Hunkeler HL6 is a high-performance unwinder designed for use in digital printing and paper processing systems. It´s typically used in commercial printing environments where large volumes of paper need to be fed into printing or finishing machines. The HL6 is known for its reliability, precision, and speed, making it suitable for demanding production environments. It´s often integrated into production lines alongside other printing and finishing equipment to streamline workflows and increase efficiency. Basic equipment • Basic module with web feed and outfeed • Operating console and operating panel with display for setup and easy operation • Casing with safety monitoring • Register print mark reader top and bottom • Two matrix readers top • Editor for easy preparation of laser patterns • Chiller for cooling the lasers ...

The operating times are specified with 1387 h. However, this is the time that the printer was connected to the network. The pure printing time is 40 h The printer was serviced regularly until last year in March 2022. Technical data Model AGILISTA-3200W Printing material AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) Support material AR-S1 (water soluble support material) Installation space 297 × 210 × 200 mm (A4 size × 200 mm) Resolution 635 × 400 dpi Layer thickness High resolution AR-M2: 15 µm Normal resolution AR-M2: 20µm AR-H1: 20µm AR-G1L/H: 30µm Power supply Supply voltage 100 to 240 VAC, 50/60 Hz Power consumption Max. 750 VA Interface Ethernet 10BASE-T / 100BASE-TX Operation Interactive color touch panel Software Name Mode ...

Production machine for making idefications bracelets e.g. for entry and access control made of PE or PE-LD roll goods. The machine was manufactured as a special machine by the company OKU. The system has not had many operating hours and is in very good condition. Function can be summarized as follows: unrolling – punching – inserting closure parts – separating into sheets – storing. Dimensions: approx. 8m length - approx. 6m width - approx. 2.5m height Machine in well-maintained condition with few running hours Processor: roll goods 350mm wide.. Stanze: for wide and narrow Versions: Feeding route: feed path to the vibration sensors for attaching the closure parts Delivery route: display of the sheets counted in boxes... Production Machine for Identification Bracelets see pictures This production machine is designed for manufacturing identification bracelets used ...

2021 Videojet 1520 TubeWriter 360 and Videojet 1520 Labels can be damaged or even peel off altogether when exposed to storage conditions or machinery, disrupting experiments when unidentifiable samples need to be replaced. Any tube, any vial, any size: The TubeWriter 360 prints on anything that fits underneath the inkjet printhead, including the side or top of any tube, vial, histology cassette, microscope slide, cryovial and much more with clear labels that ensure you ensure that they are easy to identify and reduce the risk of confusion. This machine, after installation, was only used for training purposes and never for operational purposes. So it can be seen as a brand new machine. The photo below shows different molds/holders that may contain different materials that you want to label. Find more here - / Contact us at -

Model: UV-Star BT 1200-24 Year of Manufacture: 2016 Power: 24 kW Voltage: 400V 3~NPE Current: 32 A (max 36 A) Frequency: 50 Hz Dimensions: 1.50 m (width) x 2.80 m (length) Size: 1m50 cm (wide) x 2m80 cm long. Find more here - / Contact us at -

1996 GUK Falzmaschinen K 52/4 KTL - F4 Manufacturer: GUK Falzmaschinen Country: Made in Germany Type: K 52/4 KTL - F4 Year of Manufacture: 1996 Nominal Voltage: (Not specified, space for voltage in V and frequency in Hz) Nominal Power: (Not specified, space for power in kW and current in A) Find more here - / Contact us at -

1996 Theissen and Bonnitz TB 314 QSM 65 Collating machine Hersteller (Manufacturer): Theisen & Bonitz GmbH, Burscheid, Germany Masch.-Typ (Machine Type): TB 314 QSM 65 Baujahr (Year of Manufacture): 1998 U (Voltage): 3~PE 400 V, 50 Hz P (Power): 1.9 kW Find more here - / Contact us at -

I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - / Contact us at -

2018 Tampoprint Automatic printing and laser system consisting of: Conveyor system with transfer units for parts from transport trays to separation Multi-color pad printing system with IR drying cell Laser cutting cell with optical recognition Separation and packing station Find more here - / Contact us at -

DTG PRINTER Kornit storm HD6 YEAR 2017 MADE IN ISRAEL EQUIPMENT: TEXTILE DIGITAL PRINTER MODEL: STORM HEXA SERIES LOCATION: (Mexico City) Specifications DTG T-Shirt Printing Machine Prints one t-shirt in approximately 40 to 60 seconds Features 2 pallets for nearly simultaneous printing Equipped with 2 control monitors Requires a two-phase plug Initial setup assistance for printing Does not come with inks or spare parts Printing time per t-shirt: 60 to 90 seconds Is already packed and stored Find more here - / Contact us at -

We have two Marking Machines ( bar code ) available for sale Manufacturer : MAGNEMAG Year of Manufacture : 2011 Mechanical and electrical parts are from Magnemag - The writing / ink part of Videojet Romtrust Printers SA (currently Multitech Industrial SRL) Spare Parts for MAGNEMAG Marking Machine - ARTICULATION - Drawing No: 0.36.202.092 - Quantity: 1 - ARTICULATED ARM - Drawing No: 0.36.202.091 - Quantity: 1 - ARTICULATION SUPPORT - Drawing No: 0.36.202.090 - Quantity: 1 - SUPPORT 2 - Drawing No: 0.36.202.124 - Quantity: 2 - SUPPORT 1 - Drawing No: 0.36.202.121 - Quantity: 2 - CAMERA SUPPORT - Drawing No: 0.36.202.088 - Quantity: 1 - CONSOLE - Drawing No: 0.36.202.103 - Quantity: 1 - ARM - Drawing No: 0.36.202.101 - Quantity: 1 - FRAME - Drawing No: 0.36.202.085 - Quantity: 1 - LEG - Drawing No: 0.36.202.100 - Quantity: 1 Find more here - / Contact us at -

Keyence Agilista 3200. Yera 2017. Attached is a photo of the operating hours counter from January 19, 2013. In the meantime, around 100 hours of printing have been added. The device is technically in good condition. Find more here - / Contact us at -

Gallus R200 (refurbished by Graficon in 2005) Label printing machine Machine definition 1 UV rotary screen + 7x UV letterpress + 1 UV flexo Rotary hot stamp unit (after 5th unit) Printing to glue / liner (2 units) 2x rotary die cutting unit Longitudial slitting Technical parameters: Max. width of material: 222 mm Max printing width: 205 mm Magnetic cylinders: 72, 78, 84, 90, 96, 132, 136 teeth Printing cylinders: 72, 78, 84, 90, 96, 103, 110, 117, 124, 132 teeth Collars for screen: 110, 117, 124, 132, 144, 156, 168 teeth Cores for hot stamp: 72, 78, 84, 96, 103, 110, 117, 124 teeth Find more here - / Contact us at -

2016 OCE Varioprint 6200 ( Speedupgrade ) is 6250 because its been upgraded. Very fast black and white digital printing machine Speed ​​200 A4 pages/minute 1 PaperInput module (4 compartments) 1 HighCapacityStacker BLM 200 Booklet Maker Trimmer BLT289, Squarefoldmodul SFM204 Top-Cover R-sided Docking DFD2 Interface PCL Streaming Year of construction 2016 Counter: 75.262.000 The machine is dismantled now Find more here - / Contact us at -

2013 Grafisk Makingfabrik HOTFB330 Hot foil stamping Find more here - / Contact us at -

Spindle Drilling Machine 1994 (Engine New 2015) Machine no.: PB04.08.94.261 4 drill heads Available: immediately Located: Germany

Coupon holder; suitable for Vacuumatic Vicount 3 machines. Coupon holder; used for Vacuumatic Vicount 3 machines.

Paper counting machine Vacuumatic Vicount 3 PB; serviced and inspected by Vacuumatic Customer Service; compressor overhauled; Air table 76x144cm; Touchscreen; Max. Counting speed 2500 rpm; Max. Stacking height 220mm; Paper weight 25-240g/m2; strip bullet hole; low meter reading 1.7 million Paper counter Vacuumatic Vicount 3 PB; checked and tested by the support of Vacuumatic; compressor rebuilt; air table 76x144cm; touchscreen; max.counting speed 2500 rpm; max.pile hight 220mm; paper weight range 25-240g/m2; tape insert; low counter 1.7 million

Condition: Very good condition

Fabr. No.: 8288/60

Automatic DIE Cutter TMZ EW-106 with Stripping UnitBaujahr / Year 1995 - Serial-No. 2643 Format / Sheet Size min. 450 x 450mm - max. 760 x 1060mm Dicke / Thickness min. 200g/m²- max. 2.000g/m² Kartondicke / Thickness corrugated max. 6mm Geschwindigkeit / Production per hour 6.000g/h Stanzkraft / Pressure total max. 300Tm Dimensions of machne L 4600mm x W 2300mm x H 2080mm Approximate net weight 13.500KGSWith Stripping Unit and double Sheet control. Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nürnberg - Can be test

Folder Gluer Jagenberg Simplex Universal 875Baujahr/ Year 1982 - Serial-No. 8128 Produktionsmöglichkeiten Längsnaht, 2 und 3-Punkt Material 160 - 600 g/m2, Vollpappe und Wellpappe bis 4mm Format max. 600mm x 875mm / 24" x 34" Format min. 70mmm x 55mm / 2.75" x 2.25" Maschinenabmessung BxL 1500mm x 6800mm / 59" x 268" Länge Pressband 2600mm / 102" Online-Video-Inspection by Skype-VideoWe would be very pleased with your visit - more machines on StockAvailable Immediately - Can be inspectOn Stock Emskirchen / Nürnberg - Can be test