saws wood used for sale (1,065)

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

technical data: - with continuous chain bed and hydraulically clocked pressure rollers - with digitally positioned separator for simultaneous separation of boards and sprices - Slides for the Spreissel are included in the scope of delivery - max. wooden length 2.1 m

Optimization cap seed PAUL, type 12 KE Automatic cademaege for saeging pre-programmed fixtures and fault caps after kreid marking Very little going on Top Condition

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Technical data: Make: Moehringer Length: 1900 mm Width: 60 mm - Good condition - Used to transport parquet friezes - Tipping stool and adjustable stem holder Pictures and further information on request

Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation

Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, ...

Vertongen woodworking machine, type AZ05, equipped with a table saw. Robust construction machine including a large work table, circular saw blade, rip fence and angle adjuster. Brand: Vertongen Type: AZ05 Issue No.: 3705/86 Power supply: 220 V Machine with signs of use, dust and wear marks related to its age and previous use. Sold with the elements and accessories visible in the photos. Auction-ID: A3-46110-41164

Auction-ID: A1-41281-33

miter adjustable; Auction-ID: A1-50707-253

miter and oblique; adjustable; Wooden carrying case included; Auction-ID: A1-50707-286

Auction-ID: A1-50707-108

equipped with band saw welding unit, Auction-ID: A1-50597-142

equipped with a base; without saw blade; Auction-ID: A1-50707-104

Equipped with: axle 30mm, 2 saw blades for the scorer, a saw blade, scorer (120mm, shaft size 22mm), safety cap, 380v connection, is already on pallet and is disassembled, manual, adjustable for beam wood Auction-ID: A1-47368-1601

Working. Auction-ID: A3-46142-21910

Working. Auction-ID: A3-46142-21911

Working. Auction-ID: A3-46142-21909

Vertongen AZ05 panel saw / sliding table saw – 380 V – 7.5 hp – carriage 2,600 mm Heavy professional panel saw / format saw from the Belgian brand Vertongen, type AZ05. The machine is equipped with a powerful 7.5 hp (approx. 5.5 kW) electric motor and a long sliding carriage/carriage of approx. 2,600 mm, suitable for precise cutting of aluminum sheet material and solid wood. Technical data: • Brand: Vertongen • Type: AZ05 • Machine: panel saw / sliding table saw • Power supply: 380 V • Engine power: 7.5 hp / approx. 5.5 kW • Sliding carriage/carriage: approx. 2,600 mm • Heavy-duty professional design • Sturdy construction • Suitable for sheet material and solid wood and aluminum Auction-ID: A3-46142-11984

Working. Auction-ID: A3-46142-21917

Sawing machine George: MAN. BAND SAW MACHINE with GRAVITY DROP. Brand: George. Type: CY300. Saw band size: 2750x27x0.9. Dimensions: H: 1m70, D: 1m15, W: 75cm. Year of construction: 2012. Purchased/commissioning: 2016. Supply voltage: 3x400V 50Hz. Motor: 1.5kW. Good condition. However, 1 of the two start buttons is defective. + Saw blade tension control defective. Auction-ID: A3-46142-8520

Auction-ID: A3-46142-6200

Neck depth: 405 mm Maximum cutting height: 50 mm Adjustable cutting speed: 550 to 1,650 strokes/min Flexible shaft rotational speed: 1,650 to 4,950 rpm Power consumption: 90 W Usable power: 42 W Power supply: 230 V single-phase - 50 Hz Amperage: 0.6 A Service : S2 10 min Ingress protection: IP20 Insulation class: B Weight: 14.5 kg Tilting work table Equipped with a flexible shaft for rotary tools Equipped with a transparent blade protector Dust extraction connection Auction-ID: A1-51172-112

Used wood band saw, classic heavy type with large cast-iron wheels and a large working table. Ideal for straight and curved cuts in wood in carpentry shops and wood processing workshops. Brand, exact model and detailed technical specifications not confirmed for this specific unit — please contact us for details. Heavy duty, fully reconditioned with one year warranty Auction-ID: A7-50988-11

Used Italian-made combined sliding table saw and spindle moulder (saw-spindle combination), Magic, model TS 305, ref. N0001/0051. Equipped with a 3.20 m aluminium sliding carriage and a heavy-duty spindle moulder. Sliding table saw: Aluminium sliding carriage: 3.20 m Table size: 1570 x 785 mm Auxiliary support: 1350 x 650 mm Scoring unit with external adjustment Saw blade motor: 5.5 HP, 380 V Scoring unit motor: 0.75 HP, 380 V Saw blade arbor: Ø30 mm Maximum saw blade diameter: Ø350 mm Maximum cutting height: 100 mm Side shift of the saw blade: 150 mm Saw blade speeds: 3000 / 4500 / 6000 rpm Heavy-duty spindle moulder: Motor: 5.5 HP, 380 V 2 speeds on the belts and 2 speeds on the brake switch Fence with cutting depth adjustment Spindle diameter: 30 - 50 mm Maximum tool diameter for tenoning: Ø320 mm Fixed spindle height: 140 - 200 mm Interchangeable spindle height: 140 - 160 mm Spi ...

Used heavy-duty band sawing machine for woodworking. • Heavy-type band saw used for resawing and cutting solid timber, boards and curved parts in joinery and furniture production. • Brand and model are not recorded; please contact us for details. • Condition: has not been in operation for several years; inspection and testing are required before use. • For technical details such as wheel size, table size, motor power and supply voltage, please contact us. Auction-ID: A7-50988-138

Auction-ID: A1-50476-184

Used small radial arm saw (cross-cut saw). Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-143