spare parts used for sale (782)

FRP BUFFER TANK 8" FRP FLANGE, 4" FRP FLANGE, 2" FRP FLANGE

1x Crankshaft for Wartsila 20V34 SG NEW For Sale from Stock

1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.

1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.

1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).

1 of used gearbox, Lenze type 52.110.10.14, ratio i=15. Example pictures only. Various mounting bracket versions available. Enquire for details.

1 of used gearbox, Lenze type 52.162.06.00, ratio I=10. New 1994. Overhauled with new bearings, seals and oil.

Orginal prechamber spark plug 1245-3556 For variable MWM TCG2020 v12/v16/v20 & Caterpillar CG170 -v12/v16/v20 engines. Natural gas 5pcs new

1 of used gearbox, Lenze type 52.162.06.000, ratio I=15,53. Overhauled with new bearings, seals, oil, silent block and spider.

Make Becker, Type: VT 4.16, SN: 2409570, 50/60 Hz., 1420/1700 /min, 0550,70 kW, 16/19 m3/h, 150/150 mbar. New 2009. Cleaned, fitted with new filter and tested OK.

Dear Ladies and Gentlemen, We hereby offer the following original and newly packaged AXIMAX Blue Fan. aximax axial fan NW500 Type: AXK 500-6BD2-20°-3 with attached three-phase motor IE3 3 kW; 3000 min-1; 400V 50Hz with PTC for FU operation with protective grille between impeller + motor New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de

Laetus Code Reader, Elec: DC18...32V

Voltage: 24V Rated Power: 15 kW Rotation Direction: Clockwise (CW) Number of Teeth: 17 Flange Diameter: 90 mm The information on spare parts is indicative and does not guarantee accuracy.

Original MWM / Caterpillar Energy Solutions industrial spark plug, part number 12453572. Featuring Double Iridium technology and an M18 thread, it is specifically designed for MWM TCG series and Caterpillar CG series stationary gas engines. It offers an extended service life and extremely reliable ignition even under severe operating conditions.

Ø 100, class 1.6 0 - 25 bar Version: Vertical Display range: 0 - 25 bar Scale graduation: 0.5 bar Materials: Housing 1.4571, measuring system and connection, viewing panel multi-layer safety glass Connection: 1/2'' bottom (AB) Plate spring pressure gauge

NORDSON control system., Elec: 24 V

Laetus code reader Elec DC18...32V

We offer roller shells made of chilled cast iron, nodular cast iron and chrome steel. The production is carried out according to your technical requirements and drawings. Of course, the corresponding certificates will be provided.

DC shunt motor 138 kW Armature 460 V 325 Amp Field 340 V 4.7 Amp 1880 rpm IP 23

TO WHOM IT MAY CONCERN ; WE VE 1 PC REBUILT AIR STARTER INGERSOLL RAND ST 499 IC 03L AT STOCK. ( EX STOCK ) PLS FIND DETAILS ON BELOW TYPE ST 499IC03L SERIAL NO. SP110221056 MAX INLET PRESSURE 90 PSIG MADE IN USA IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

A used control cabinet with Elau interior see photos If you are interested, more information

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks

Connecting rods Jenbacher Series 4 Article number 9036319 20x in stock

1x Crankshaft for Jenbacher 624. Item no. 444990 1x Crankshaft for Jenbacher 624 No. 444990

New Leveling Milling Head for Muller Martini Perfect Binder

Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!

Cover FP42NC 2387 X-Axis Ball Screw with Nut new! Number according to spare parts plan: 2388-002435 Shipping by arrangement

Serie Jenbacher 4 teste a 4 cilindri codice 367165 (422964 1216091) - Già revisionate e pronte all'uso: 1.500 € - Da revisionare 500 € Jenbacher 4-head 4-cylinder series code 367165 (422964 1216091) - Already overhauled and ready to use 1.500€ - To be overhauled 500 €

For sale is a universal gripper from Schunk, T. Number: PGN-125-1 0371103, Subject to prior sale, changes and errors!