Coolant Reservoirs TURBO-SEPARATOR Zentral 400 L/Min T42

Coolant capacity: 400 l/min Conveying height: 6 Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The
Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each.
200 liters/min. The total capacity of the plant is 300 to 400 liters per minute.
Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 ,
Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for
Supply of production with pure oil.
In addition, the system has a lot of accessories: all spare parts + an old one
centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the
Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge
automatically into the bucket under the centrifuge. The scope of delivery also includes a
additional electrical cabinet for a second system with the same power (the
The condition of control cabinet 2 is unknown, because the system has been equipped with 4 centrifuges since the beginning.
). 6 pumps, a new electric motor for the centrifuge, etc...
Each of the centrifuges can filter up to 200 L/min, using magnetic and non-magnetic
filtered magnetic particles. Depending on the type of sludge, each centrifuge can hold up to 30 kg
Eject sludge per hour. The sludge is automatically removed from the centrifuge
. Under each centrifuge there is a sludge container that is
must be changed.
The use of the centrifuge gives the following advantages: high cleaning quality (3 to 10 μ),
Filtration without consumables, automatic sludge ejection, drier
Sludge in comparison with Vomat filter system or Transor filter system.
Technical details:
2 centrifuges T42 B.J. centrifuges: 1993 and 1994
Aluminum alloy rotors for liquids
with pH between 6.5 and 9.5
2-phase separation
Rotor capacity 40 litres each
Sludge capacity per centrifuge max. 30 kg/hour
Motor 7.0 kW each,
The electrical cabinet was rebuilt in 2001 and is already running on Siemens control
Coolant tank 20 m3 without cooling unit with pumps
All pumps are included in the scope of S51262795 delivery, including the pump S51262795 for the pure oil up to
400 l/min, 6 bar.- Made of sheet steel and profiled steel, stable and tight
welded - collection container for dirty liquid is integrated in the clean container, inlet from above,
the system was in the basement.- Capacity pure coolant tank approx. 12000 -16000 liters- With hanging eyelets for maintenance and transport.
The scope of delivery includes all spare parts and tools for the maintenance of the centrifuges.
The plant has already been dismantled and packed for transport.
The cleaning system can simultaneously load several machines with clean oil or oil.
emulsion. Use as a central system with oil for carbide and HSS grinding,
Stainless steel, or steel Grinding of tools, saw blades or gears, etc.
Dimensions for the required display area of the entire system: height approx. 2000 mm,
Width: approx. 4000 mm, Depth: approx. 4000 mm
seller offer No. resale Zentralanlage Turbo