paper converting: die cutters used for sale (180)

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Bed size 105x 147 cm Pneumatic clutch full working condition Video available

Max size 46 x 58.5 cms 2 Frames

740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million

A brought cylinder Heidelberg 40x58cm

max. format 54 x 72 cm Built in 1960 Inking unit not complete for punching / embossing Price on request. We supply and install worldwide.

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.

Heidelberg Embossing Crucible TP, Machine Number T169693+ Heidelberg Embossing Crucible TP,T191298, Machine is in good condition, immediately available Rebevvikfer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Swivel arm punch Sandt, in good condition, immediately available Robsvvhfuer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

sheet width: - mmplate length: - mmplate thickness: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible.

Printing speed: 325m/min, machine dimensions X/Y/Z: 450mm/360mm/530mm, weight: approx. 25kg, operating hours: 4143h. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

Bobst SP 1650 E Max.Size: 11501650mm Min.Size: 570850mm Max Speed: 4500sh/h Year 1970 In good production condition.

Bobst SP 130 E Year 1985 Max.Size: 920x1300mm Min.Size: 450x580mm Max Speed: 7000sh/h Max. Cutting force: 500T center line Immediately available.

Size: A4Technical details: Speed: 5500Power: 380 V 1,25 KWNet Weight: 1100 KGMeasurements: L1,68 x B1,24 x H1,85mEquipments:Skeleton chase: 260 x 350mmSpeed min.: 2.200 sph - max. 5.500 sphSize max. 260 x 380 mmLetter Press Tiegel - DIE CutterPunching force 40 tonsComplete with tools and accessories include frameStandard chase: 260 x 340mmMachines No T 184634 H

Size: 600 x 500 mmTechnical details: Min. size: NULL Max. size: Maximum sheet size: 600 xNet Weight: 8.200 kgMeasurements: L: 3.320 W: 2.440 H: 2.13Equipments:Krause autofeed die cutterMax. Size: 60 x 50 cm (23 x 19 inch)Processable materials: Paper, heavy cardboard, corrugated board, plastics, and leatherMaximum cutting pressure: Approx. 40–50 tons (engineered for high-precision heavy die cutting)

Size: A4Equipments:Letter Press Tiegel - DIE CutterPunching force 40 tonsSize min.: 40 x 70 mmStandard chase: 260 x 340mmSpeed min.: 2.200 sph - max. 5.500 sph

Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...

Hakro hot foil installation on K offset cilinder from 1960. Electronically upgraded for higher production quality. More details on request.

Hot foil stamping machine with original installation on the GTP model. In production.

Platen press / Diecutter - clamp shell die cutter Make SR-Pack Model ML1500 Year 2003 Size 1000 x 1500 mm Details 2 chases, timer dwelling operated, pneumatic clutch, central lubrication Available Direct

Sheet format: max. 760 x 1060 mm, min. 300 x 350 mm Equipment: Stripping station, centerline, non-stop, micrometer adjustment, electronic double sheet control, sheet marking device, vacuum feed belts, drawing mark left, slide mark right, machine hours approx. 8 million punches, 1 die-cutting frame Quick-release frame at the top/bottom of the stripping station, raised position, max. machine speed 8,000 sheets/hour, max. die-cutting pressure 260 tons, materials that can be processed: paper min. 90g/m², cardboard / solid board max. 2,000 g/m², corrugated board up to 4 mm.

max. format 72 x 106 cm Built in 1967 automatic punching cylinder Letterpress cylinder converted to a punching cylinder Stack Feeder Shed Feeder Stack delivery Delivery date: immediately Price on request. We deliver and install worldwide!

Die cutter

Hoza EMU Punch This machine is ideal for punching out small moulded parts made of paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged knives or strip steel cuts can be inserted into the machine. Knife stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Colour: hammered blue Dimensions: 450 x 360 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units

Hang Folder Grip Hole Eye Machine Automatic Hole & Eye Insertion Machine Type: 115 G3P Year of construction is not known. This machine has not been used for 10 years, and is in good condition

1955 A4 Size Standard machine Machine no.: 107297N Located: Germany Available: immediately

Fully automatic high-performance die-cutter Renz Kugler 341-2R for calendars and ring binders Technical data – Working width: 500 mm – Format area die-cut side: max. 500 mm – Format area unpunched side: max. 500 mm – Punching thickness: max. 3 mm per layer – Punching speed: 110 cycles – Paper feeding: automatic with non-stop paternoster feeder – Paper delivery: automatic in box delivery with vibrator – Paper grammage: min. 60 gr./m², max. 2 mm (restrictions due to paper grammage/quality are possible) – Register punching: yes (not included) – Interchangeable tools – Tool change requires only a few steps – fast format change thanks to manual adjustment wheels – adjustable edge spacing – Switchable punches – Space requirement: 3.30 x 1.50 m – Net weight 1580 kg