saws wood used for sale (1,042)

Key data: 45 °, 3300 mm, 1250 mm

MARTIN T73 AUTOMATIC, parallelogramtic, driven trolley, 3-axis control Mark: MARTIN Type: T73 AUTOMATIC Year of Make: 2001 Table dimensions: 1,350 x 1500 mm. Cutting width: 1,350mm Edging table: 3,300mm Main saw: 7.5 kW Saw blade shaft: ø30 mm. with two drive pins Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø 400 mm retractable under table; Cutting height: 170 mm. (Saw blades. 500 mm.) Saw blade swivel: 0 - 46° Scoring: Optional (Could be installed for € 1,750 surcharge) Cutting width: 1,350 mm Rip fence: Stop ruler in anodized aluminum; Final position; Automatically lowers below table level Length stop: Digital length stop made of anodized aluminum with Martin 2-point stops Control: NC control with LCD display of width, height and oblique angle, plus 2 digital length stops Screen: LCD control panel at eye level, swive ...

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; 3-axis electric scoring adjustment Brand MARTIN Type T72A Aut Year of Make: 1997 Control panel: At eye level in the extraction support, integrated with 3-axis NC control, electric saw hood, height adjustment and 3-axis scoring Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Saw hood: Electric height adjustment Landing table: Steel (galanized) with fixed detent points for mitre angles 0°, 22.5°, 30° and 45° or freely selectable intermediate interlocking angles Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with 2 point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2000/275 ...

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; Brand MARTIN Type T72A M-No.: V238101 Year of Make: 1997 YouTube: Control panel at eye level integrated in the extraction support Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Landing table: parallelogram cross table Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with digital 2-point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2800/4000/5500 rpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 1,250 mm Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 1,600 KG

Key data: 45 °, 3300 mm, 850 mm

Martin T72A sliding table saw with: hydraulic saw height and digital display at eye level Hydraulic saw blade swivel and digital display at eye level Handwheel adjustment of the cutting width and digital display at eye level Parallelogramtic for angular sections -46° to 46° and digital readout Scoring saw Brand MARTIN Type T72A Comfort Year of Make: 1999 Control panel eye level integrated in the extraction support (saw blade height, inclination, cutting width) Saw blade height adjustment: Hydraulic with digital display in the screen 0-170 mm Saw blade tilt: Hydraulic with digital display in the screen 0- 46° Parallel stop: handwheel adjustment with digital display in the screen Saw hood: Electric height adjustment of the hood Manual move to the right for oversize products to saw Landing table: Aluminium parallelogramtisch +/-46° miyt digital angle display Leng ...

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

BRENTA resaw, type DDP 150, Machine specifications:, - With centre feeding device, - Flywheel diameter 1500, - Flywheel width 185 mm, - Clutch for speed adjustment, - Hydraulic driven feeding rollers, - Motor power 37 kW, - With control unit and accessories

HOLTEC mobile package cross cut saw, type HF 121

EWD - GILLET log bandsaw line with canter and double-cut, - Heavy duty log loading deck, - EWD hydraulic log carriage, type EW 1000, - GILLET canter, type SL, - GILLET bandsaw machine, type TO1600, - Outfeed conveyor, - Control unit with Mudata controller

WEINIG moulder, type Hydromat 22B, Machine specifications:, Planing width 220 mm, Planing height 120 mm, Feed speed 6 – 60 m/min, Motor power hydraulic feeding 15 kW, Spindle layout:, 1. Horizontal bottom spindle, motor power 11 kW, 2. Vertical right spindle, motor power 7.5 kW, 3. Vertical left spindle, motor power 11 kW, 4. Vertical right spindle, motor power 7.5 kW, 5. Vertical left spindle, motor power 7.5 kW, 6. Horizontal top spindle, motor power 11 kW, 7. Horizontal bottom spindle, motor power 15 kW, 8. Horizontal top spindle, motor power 11 kW, 9. Horizontal bottom spindle, motor power 7.5 kW, - Hydraulic front bearing for spindle 1, 6 - 8, - Equipped with jointers, - Surface table 2500 mm, - Spindle diameter 50 mm, - Automatic lubrication system, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Digital read out feeding speed, - Incl. accessories

LBL BRENTA headrig, type XBE 180 R, Machine specifications:, - Diameter flywheels 1800 mm, - Width of flywheels 285 mm, - Maximum sawblade 311 mm, - Saw blade protection, - Motor 150 Hp

BRENTA resaw, type DK 150, Machine specifications:, - Flywheel diameter 1500, - Flywheel width 185 mm, - Heavy duty feeding by 2 vertical rollers, - Motor power 75 kW, - With control unit and accessories.

Part Number 7670 SPECIFICATIONS - Track width 340mm - shaft width 400mm - max blade diameter for multi-rip blade 350mm - blade bore diameter 80mm - max cutting height for the edger 100mm - max cutting height for multi-rip saw 120mm - table top width with clearance 900mm - table top length 1780mm -in advance: - Flingers - roller, pressure, slip, metal, - Flingers - pressure roller, slip roller - shaft with saws - pressure roller, slip roller - metal slip shaft, pressure shaft - from below: - guide strip - Flingers -caterpillar - central lubrication - Infinitely variable feed speed - electric shaft lifting with saws 0.75kW + body 1.1kW - feed motor 1.5kW - main motor 22kW - floating saw travel 0.55kW - lasers (not working, to be reviewed) - extraction spigot diameter 210mm - total dimensions length/width/height 2200x1450x2000mm - weight  ...

Part Number 7668 SPECIFICATIONS - Track width 250mm - shaft width 450mm - max blade diameter for multi-rip blade 350mm - max blade diameter for the edger 350mm - blade bore diameter 80mm - max cutting height for multi-rip saw 120mm - max cutting height for the edger 100mm - table top width with clearance 900mm - table top length 1770mm -in advance: - Flingers - roller, pressure, slip, metal, smooth - Flingers - pressure roller, slip roller - shaft with saws - pressure roller, slip, metal 2 pcs - from below: - guide strip - Flingers -caterpillar - central lubrication - Infinitely variable feed speed - feed motor 1.1kW - main motor 22kW - total dimensions length/width/height 2200x1600x1800mm – weight 1900kg – made in Germany – roller with a floating disc for edging – used multirip saw, very good condition Net price: 54900 PLN Net pric ...

Part Number 7674 SPECIFICATIONS - max diameter of the main saw blade 300-450mm - height of the main saw blade adjustment vertically - for saw blade ⌀300 0-75mm - for saw blade ⌀350 0-100mm - for saw blade ⌀400 20-125mm - for saw blade ⌀450 45-150mm - 45° height of the main saw - for saw blade ⌀300 0-50mm - for saw blade ⌀350 0-70mm - for saw blade ⌀400 12-85mm - for saw blade ⌀450 30-105mm - Circular saw blade tilt 0-45° - sawing length with the help of an auxiliary table - with a strip set at the back of the table for a movable table 300 = 3200mm - cutting width with guide 50-1750mm - Extension (from – to) 1965-3200mm - bumper with digital readout 50-1630mm -Max. distance between the longitudinal guide and the saw 1400mm - main motor power 6kW - undercutting spindle motor power 0.75kW - Saw blade diameter of the scoring spindle 120-130mm - ...

Key data: 45 °, 3200 mm, 1250 mm

Rema DMMC Sliding Table Saw Brand Rema Type DMMC40 M-No.: Year of Make: 1995 Main saw: max. ø400 mm, cutting height: 130 mm, saw blade inclination: 0° - 45° Scoring Saw Yes Speed control: 2,800/4,000/5,500 tpm Motor: 5.5 KW Edging table 3,000 mm Cutting width: 1,250 mm Length stop: 2-point length stop 2,200 - 3,300 mm Landing table: With fixed mitre anchorage points Suction: Top: ø80 mm, Bottom: ø140 mm Weight: 900 KG

Key data: 45 °, 3 mm, 2 mm

SCM SiI400N Sliding Table Saw Mark SCM Type SI400N M-No.: AB/127843, 071528 Built in 1999 Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3000-4000-5000 tpm. Cutting height 130 mm. (Saw blades. 400 mm.) Saw blade swivel 0 - 45° Scoring ø mm, ID: 20 mm Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Lay-down table: steel Lay-down table with licence for angle cuts Length stop anodized aluminum with 2 flaps Control panel Digitale-analoge zaaghoogte aflezing Condition Fully functional, very SCM maintained

Key data: 45 °, 3 mm, 2 mm

SCM Si400 Vanguard Sliding Table Saw with Touch Screen 3-Axis Control, Mitre Landing Table Mark SCM Type SI400Vanguard M-No.: Year of manufacture 2004 Control panel: 12" touchscreen at eye level, start-stop trolley Control: 3-axis CNC control 1st cutting height 2. Saw blade tilt 3. Cutting width Memory: 999 memory positions, 6 cuts per program, auxiliary function with graphical display, collision warning Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3,000-4,000-5,000 rpm Cutting height 130 mm. (Saw blades. 400 mm-90°, 92 mm- 45°.) Saw blade swivel 0 - 45° Scoring ø120 mm 2-axle control: 1. Cutting height (radial) 2. Cutting height (axial) Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Landing table: Vanguard walking table with digital angle display +50° to –50° Anodize ...

Key data: 2 kW, 5000 kg, 14 kW

Homag SawTeq B-300 flexTec with Yaskawa D200 robotter Brand: Homag Type: B-300 flexTec/Profi HPP300/43/43/F M-No.: 0-240-69-1263 Year of Make: 2020 Control: Cadmatic 5 Ardis Data Control Labeler: Pica II Robotter: Yaskawa DX200 Total connected load: 80A saw, shredder and 14.4A robotter 35A Crusher Cutting length 4,300 mm Cutting width/depth: 4,300 mm Main saw: 13.5 KW Saw blade protrusion mm: 80 mm Saw height: 72 mm Saw feed: 130 m/min Scoring saw motor: 2.2kW Angle Pressing Device: Sword Grooves: Nuttprogram Collets: 8 Program Trolley Feed: Step-Free Air cushion device 4 pcs, with between filling plates Table dimensions: 1 (1,760650) + 3 (2,170650) mm Additional features of the machine: Connection to storage system Yaskawa DX200 Robotter: Brand: Yaskawa DX200 Type: Eres-MPL0300-E00 M-No.: 201153 Year of Make: 2020 Robot system: YASKAWA ...

Key data: 46 °, 3 mm, 850 mm

Martin T60C Sliding Table Saw Brand Martin Type T60C M-No.: V482223 Year of Make: 2008 Control panel: touchscreen integrated at eye level in the extraction support 2-axis control (saw height, inclination, cutting width with handwheel adjustment but with digital readout of the cutting length in the screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivel: 0° - 45° Speed control: 4,000/4,800/6,000/tpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 850 mm, handwheel adjustment with readout in the screen and +/- 0.05 mm accuracy Table: galvanized steel with fixed-angle stops 0º, 22,5º, 30ºen 45º. Dimensions: 1,340650mm Length stop: 2,200 - 3,300 mm with analogue readout, folding latch with magnifying glass Suction: Top: ø100 mm, Bottom: ø120 mm Weight: 1,400 KG

Key data: 46 °, 3 mm, 1 mm

MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic:  ...

Key data: 300 mm

SPECIFICATIONS: Saw blade: Ø 300 mm Installed power: 2.5 HP Voltage: 380 V EQUIPMENT: 01 Workbench

Centauro Slitting Saw Type SLG 8000 Year of construction: 2011 Cutting length max. 8000 mm Cutting width max. 1900 mm Cutting height max. 160 mm Motor 11 kW with laser light with pressure beam

3.5 to low-loader with new floor plate, Tuf neu 12/24 Top condition, no damage 13.06.2012

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

Sliding table saw Altendorf WA 80 Digital display angle and cutting height Motor power 5.5 kW Scoring 0.75 kW Carriage length 3200 mm Saw blade diameter max. 500 mm, can be lowered below table height Cutting height max. 125 mm, at 45° max. 87 mm Cutting width at the rip fence 1350 mm Height adjustment electromotive Swivel angle adjustment electromotive 0 – 45° Angle stop, cutting to length up to 3200 mm Table extension 840 mm Machine weight approx. 1100 kg Work table height 910 mm Top condition

STENNER tilting resaw, type ST10F

Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Cutting capacity: height x width mm 380 x 750 Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensi ...

saw blade diameter: 225 mmcutting diameter: max. 60 mmfeed: max. 600 mmtotal power requirement: 5 kWweight of the machine ca.: 1,03 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15282 90 band length: 4600 - max. 4750 mm: Fabr. Ideal weight: ca. 890 kgdimensions of the machine ca.: 130 x 850 x 2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mmthroat: 490 mmworkpiece height: 220 mmtable-size: 600 x 600 mmsaw band length: 3350 mmturning speeds: 12 - 1900 m/mintotal power requirement: kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,2 x 0,8 x 1,95 mBand saw with- swivel table- Footswitch- Machine light- IDEAL welding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.