Cooling Units WALGER WS-100 120 L/M

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide.
Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode.

The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc.

Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). The filtration quality is up to 2 μ, the sludge is pumped into a sludge container after the backwash process, and needs to be changed manually after a certain time. The dirty oil runs into the dirt container of the system via the drain hose or drain pipe on a self-slope level. The dirt medium is pumped from the dirt container into the filter and filtered. The sludge (magnetic and S51262795 non-magnetic) collects on the surface S51262795 of the cylindrical filter elements and is discharged and collected into the dirt container. After filtration, the clean oil goes into the clean container, on which there is a cooling unit and the clean pump. The cooling unit ensures the right medium temperature in summer and winter. There is a clean medium high-pressure pump on the clean container. The pump pumps the clean oil to the machine. We will be happy to answer your additional questions, the facility will be available from the beginning / middle of December 2024.
seller offer No. resale Rückspühlfilter