Climatic test chamber with seat pulser 20 - 100 °C WEISS SD 1400/+20 DU

Weiss Climate Test Chamber with Seat Pulsator

Manufacturer: Weiss

Type: SD 1400/+20 DU

Test chamber:

Material: Stainless Steel

Dimensions

Height approx. 800 mm
Width approx. 2000 mm
Depth approx. 900 mm

Capacity: 1440 litres

Outer housing

Material: double-coated zincor sheet

Dimensions

Height approx. 2000 mm
Width approx. 2200 mm
Depth approx. 2000 mm

HxWxD 2000 x 2200 x 2000 mm

Paintwork: light grey (RAL 9002)

Door, double-leafed: hinged left and right

Equipment:

Feed-through in floor and ceiling: 2 pieces each, NW 100 mm, for inserting the pulsating tables

Feed-through in the side walls: 1 piece each, left, right, 100 mm

Refrigeration unit: air-cooled

Control: Digital measurement and control system DMR

Basic control panel: integrated in the main switch panel

Interface: RS 232 C, for connection to a PC

Software: Operating software for MS-Windows

Performance data:

Temperature range without air conditioning: +20...+100 °C

Temperature constancy without climate: +0.2 ... t0.5 K (temporary) depending on the area, in the steady state

Temperature range with air conditioning: 20...+95 °C

Temperature constancy with climate: +0.2 ... +0.5 K (temporal) depending on the range, in the steady state

Dew point range: 20...+94 °C

Humidity range: 10...98 % RH

Humidity constancy: +3 ... +5 % RH depending on the area, in the steady state

Temperature change rate measured in the blowout without test sample and without load
- Cooling: 0.5 K/min. on average, between +100 and +20 °C
⁃ Heating: 0.5 K/min. on average, between +20 and +100 °C

The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage
For the system to operate properly, the ambient temperature must be between +10 and +35 °C

Connections / Miscellaneous

Protection class: IP 32 for the control cabinet

Sound pressure level for free-field measurement at a distance of 1m in front of the device: 60 dB (A)

Humidification water: fully demineralized, conductivity max. 20 pS/cm, pH value 6 - 7, replenishment automatic

Condensate drain: back pressure-free, 3/4" hose connection

Mains connection: 400 V; 3 PH+N PE; 50 Hz

Connected load: max. 10 KVA

Weight: approx. 1160 kg

Seat test device with steel construction for attaching and attaching to climate test chamber including:

• 2 pneumatic weight lifting devices (150 mm stroke) for changing the test specimen, 12 weights of 5 kg each
• 1 base frame in normal steel weld construction for attaching to the underside of the climatic test chamber
removable plates and has 2 hinged doors for adjusting the K51227004 exentrisity. These K51227004 doors have safety switches.
• 2 exenter discs with bearings and speedometer 2 connecting rods .2 ball guides
• 2 assembly tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminium, thickness min. 10 mm
• 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock replica
• 2 load rods 60 0 made of stainless steel (The connection to the test specimen is not included in our price, but can be offered later after a precise definition.)
• 2 three-phase motors. 2 belt drives with tensioning devices
• 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converter hand switches, emergency stop button, 2 single buttons, 2 push buttons, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selector load change drivers with zero position and shutdown

Specifications:

Frequency: 100-1000 strokes/minutes
Load: 2 x 45 g
Stroke: 0 - 40 mm
Load from above 450 N each

More items - new and used - can be found in our shop!
International shipping costs on request!
seller offer No. resale 48551