almi grinding machines used for sale

Offer 24315 Univ. Radii Metal Belt Grinding Machine Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Contact disc / grinding roller Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact - sanding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA up to 4 ...

plate thickness: max. 5.0 mm tube diameter: 27.9 - 61.0 mm motor: 400 Volt total power requirement: 2.2 kW weight of the machine ca.: 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼), Ø 48.3 (1 ½), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes ...

plate thickness: max. 5.0 mm tube diameter: 27.9 - 61.0 mm motor: 400 Volt total power requirement: 2.2 kW weight of the machine ca.: 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼), Ø 48.3 (1 ½), Ø 60.3 (2?). This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. T ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 € : 20 - 76,1 mm : 3 mm : 2.5 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 € : 3/4 26,9 mm, 1 33,7 mm, mm : 3 mm : 2.5 mm : 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",). The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 5543 : prompt, Zwischenverkauf v : Niederlande : 3100 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg Demo machine / mint condition Net price (price for new machine € 3.911,00) The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a d ...

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 € : 1 1/4 42,4, 1 1/2 48,3 mm : 3 mm : 2.5 mm : 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 € : 149.25 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5104 € : 98.51 € : 3/4 26,9 mm, 1 33,7 mm, mm : 5 mm : 3 mm : 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 € : 114.49 € : 3/4 26,9 mm, 1 33,7 mm, mm : 5 mm : 3 mm : 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints. The data for this ad wa ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 979 € : 1 1/2 48,3 mm, 2 60,3 m mm : 3 mm : 2.5 mm : 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 € : 122.59 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

Silca key cutting machine type rekord, see photos

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

CNC cylindrical grinding machine, STUDER S31 CNC LeanPro, with Pictogramming, Distance between centers: 1000mm, Center heigh 175mm, Grinding Wheel head rotation (B) 360° (1°), 2 ext Grinding Wheels, 1 int Grinding Wheel, Ext Grinding wheel, 400 mm x 40 mm x 127 mm, overhauled spindle > see photos, Workhead, CM 4, 0-1000 RPM, CNC Fanuc, Programming: Pictogramming, Heidenhain linear encoders, This machine can be inspected under power in our warehouse in Gussago BS Italy

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Very good surface grinding machine Table surface / working area 200 x 600 mm

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

ELB ELB Super Rubin 020 VA II CNC surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth control Magnetic Table 600 x 300 mm Movements axis X/Y/Z: 650/300/250 mm 4th axis- rotational Grinding wheel: -Dia 300 mm -width 40-50 mm -bore size 76,2 mm Spindle speed 1400-2800 rpm Total power requirement 5,5 kW Weight of the machine ca. 3,4 t 4th axis devices: -Punch former PF350 V-block -Punch former PF650-ER20 -Punch former PFD-ER40 -Punch grinder PGAS- centreless Accessories: Collets Radius and angle dresser RDC Sinusoidal-table for devices SPF 50 Balancing rack for wheels LBS 14 surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth c ...

Technical data Machine Type: Grinding workstation with belt sanding machines and double grinding machine Manufacturer: Metabo, Optimum Maschinen Germany Model belt sander: Metabo BS 175 Model belt sander: Optimum SL-2 Model Double Grinding Machine: Optimum OPTIgrind GU 25S Configuration Workbench with grinding workstation 2 belt sanders available Double grinding machine available AEG angle grinder available Machine vise available Signs of use and dirt present Auction-ID: A7-47277-3113

Technical data Machine Type: Grinding workstation with belt sanding machines and double grinding machine Manufacturer: Metabo, Optimum Maschinen Germany Model belt sander: Metabo BS 175 Model belt sander: Optimum SL-2 Model Double Grinding Machine: Optimum OPTIgrind GU 25S Configuration Workbench with grinding workstation 2 belt sanders available Double grinding machine available AEG angle grinder available Machine vise available Signs of use and dirt present

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3,75 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M1,5 EW20° 4GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5,75 EW22° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3,75 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Technical data Machine Type: Drill Bit Grinding Machine / Tool Grinding Machine Manufacturer: Brierley Dimensions: approx. H1300 x W600 x L700 mm Floor-standing unit with base cabinet Grinding wheel available Configuration Drill clamping device available Swivel grinding head Various clamping sleeves and collets included Additional grinding wheels included Tool and adjustment accessories in the base cabinet Machine with extensive accessory package Signs of use and dirt present Auction-ID: A7-47277-3111

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M1,5 EW20° 4GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-2

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-37

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M7 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-40

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2,25 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-5

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-33

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-18

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-10

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M0 EW00° 0GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-41

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,5 EW21,5° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-24

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-4

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3,5 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-12

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-27

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-29

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5,75 EW22° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-31

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-22

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-9

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-36

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2 EW15° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-23

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,7 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-25

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3,5 EW17,5° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-11

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M7 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-39

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6 EW22° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-35

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2,5 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-38

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4 EW15° 4GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-15

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2,5 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-8

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,7 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-34

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-6

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4 EW15° 4GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M7 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3,75 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-13

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M6 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-32

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-30

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-26

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2,5 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-7

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-28

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3,75 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-14

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools Auction-ID: A1-47282-19