forkardt accessories for machine tools used for sale

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Quantity: 1 piece available -Price: per piece -Weight: 60 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

16 pieces tool holder external machining 41 tool holders internal machining

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Type: FWB 315/425 -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 145/110/H62 mm -Total weight: 6.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece soft jaw set -Width: 20mm -Total dimensions: 84/60/H40 mm -Total weight: 1.1 kg

Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.

diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws -Chuck size: Ø 400 mm -Bolt circle: mm -Through hole: 102 mm -Total dimensions: Ø 400 x 125 mm -Weight: 90 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 36 mm -Shipping/Price: complete -Dimensions total: 145/220/H63 mm -Total weight: 12.3 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Bolt circle: 172 mm -Weight: 90 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

Technical Description:Base Jaws

different sets for an F 200 3 jaw chuck (base jaws on top jaws)

1 gebr. 3. - Baking Chuck Forkardt F 250

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H75 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H60 mm -Total weight: 1,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/70/H70 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H65 mm -Total weight: 2.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H60 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/65/H50 mm -Total weight: 1,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 105/75/H60 mm -Total weight: 2,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/70/H60 mm -Total weight: 2,1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 80/60/H45 mm -Total weight: 1,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/70/H60 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/70/H55 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/65/H65 mm -Total weight: 2.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 14 mm -Dimensions: see photo technical. drawing -Total dimensions: 50/60/H35 mm -Total weight: 0,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/65/H60 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Handover: in current condition as seen -Toothing: 1 piece Damage see photos -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 115/65/H65 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Number: 4 sets of base jaws available -Price: per set -Total dimensions: 90/65/H35 mm / 90/67/H35 mm/ 90/70/H45 mm with screws -Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 120/65/H70 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 105/67/H72 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions total: 285/240/H85 mm -Total weight: 24.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Dimensions total: 95/65/H70 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 32 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 90/95/H55 mm -Total weight: 2.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Dimensions total: 90/80/H70 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H125 mm -Weight: 19.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 162/174/H175 mm -Weight: 18.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 167/135/H93 mm -Weight: 10.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 4 sets -Jaw width: 20 mm -Attachment: Material: Aluminum -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 350/300/H75 mm -Total weight: 9.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 22 mm -Attachment: Material: Aluminum -Dimensions: see photo technical drawing -Transport dimensions: 270/95/H70 mm -Total weight: 2.5 kg

Universal dividing head HOMMEL 349 + Forkardt 408429 + tailstock + accessories 1) HOMMEL WERKE Universal Dividing Head 349 (Partial head / rotary table / rotary table, swivel horizontally & vertically) 2) Forkardt 3-jaw lathe chuck (Model/No. 408429, diameter Ø 160 mm) 3) 5 complete sets of interchangeable jaws for lathe chuck 4) Tailstock HOMMEL 349 5) Centering Bracket / Tip Bracket 6) Slot table / base plate Areas of application & details: Universal dividing head Hommel 349 for precise rotary and partial machining, ideally suited for conventional milling machines, tool milling machines (e.g. Deckel FP1, FP2, FP3, Maho, Aciera, Huron) and demanding fixture construction. Includes original Forkardt 3-jaw chuck 408429 (size 160mm) and five sets of interchangeable jaws for maximum clamping flexibility. The original Hommel 349 tailstock and the height-matching centering block w ...

FORKARDT PF 2 ist ein 3-Backenfutter, ausgelegt für hochpräzise Bearbeitungen mit hoher Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Durchmesser 350 mm. Haupttechnische Daten: Maschinengewicht ca. 120 kg. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Including rack and transport yoke Auction-ID: A1-48474-204

Auction-ID: A1-49674-142

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Technical data Mixed lot of cutting tools, tool holders and machine accessories. Configuration Various tool holders and tool holders Multiple milling heads and milling tools Drilling and boring tools Four-jaw chuck ATORN 3D Probe 2 tool mounting/holding fixtures with TUL KELCH SYSTEM labeling Other machine tools and accessories as shown in the illustrations Auction-ID: A7-49302-191

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Auction-ID: A1-49027-110

Auction-ID: A1-49027-109

Auction-ID: A1-49027-108

Auction-ID: A1-49027-111

Auction-ID: A1-49027-106

Standard Auction-ID: A1-49309-64

Auction-ID: A1-49365-52

Various band saws Auction-ID: A1-49309-194

Auction-ID: A1-49365-49

Carl Mahr Esslingen E18-596 Concentricity test block Auction-ID: A7-48995-24

Auction-ID: A1-49027-103

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Wooden. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-20

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-18

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-17

Sale from candelabra/lamp post factory liquidation. Custom made workshop table with drawers. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-16

Sale from candelabra/lamp post factory liquidation. Roll stand. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-24

Sale from candelabra/lamp post factory liquidation. Workshop chair. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-30

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-19

Sale from candelabra/lamp post factory liquidation. Custom made workshop table with vise. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-21

Sale from candelabra/lamp post factory liquidation. Workshop shelf. Metal. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-29

Large set of professional tooling including flat and combination wrenches, files, hammers, chisels, mechanical accessories, chucks, tool holders and various metal equipment. Interesting set for mechanical workshop, maintenance, machining, locksmithing, metal construction or tool resale. Visible storage bins are included. Sale in a single lot with all the contents visible in the photographs. Auction-ID: A1-48554-259

2x heavy pulley pullers Auction-ID: A1-49309-124

2x roller stand Auction-ID: A1-49309-70

2 pulley pullers Auction-ID: A1-49309-68

Pallets with various materials (garden tools, brooms, etc.) Auction-ID: A1-49365-162

Various bending jigs Auction-ID: A1-49309-196

Various parts for turret lathe 1 pallet Auction-ID: A1-49309-60

Dimensions: White long: 295x58x40 Black cooling water tank: 260x45x40 Black chip conveyor: 190x57x115 White cooling water tank: 100x100x118 Auction-ID: A1-49365-15