hesse by sahinler sheet metal working used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 81500 € : 1540.35 € : 8 mm : 5 mm : 80 mm : 10 mm : 4500 mm : 720 mm : 95 (R 80) / 35 (R 25) mm : 11 kW : 4900 mm : 1700 mm : 2700 mm : 4550 kg incl. flanging rolls for mild steel (R25) incl. cutting blade top and lower roll driven by hydromotor and plantary gear box possible to flange both, flat and crowned bottoms hydraulically adjustable bottom height cutting and flanging on the same head lateral support rolls operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 28450 € : 543.4 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone leng ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 € : 1056.51 € : 3100 mm : 9 mm : 8 mm : 7 mm : 7 mm : 5 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1470 mm : 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 € : 781.19 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 20400 € : 391.68 € : 80 mm : 245 mm : 3 : 4 kW : 6 m/min : 100x20 mm / 2000 mm, 80x2 : 125x25 mm / 600 mm, 60x5 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 500 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.300 mm, 25 : 80x80x8 mm / 800 mm, 30x3 : 70x70x7 mm / 700 mm, 30x3 : UPN 140 / 1600 mm, UPN 12 : UPN 140 / 1.600 mm, UPN 1 : IPN 120 / 600 mm, IPN 80 : 1450 mm : 1000 mm : 1400 mm : 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 € : 980.91 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4450 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1014.93 € : 2050 mm : 16 mm : 16 mm : 13 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1550 mm : 6100 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 49900 € : 953.09 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1470 mm : 5450 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 € : 1145.34 € : 3100 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1550 mm : 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57000 € : 1077.3 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4800 mm : 1600 mm : 1550 mm : 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 73200 € : 1383.48 € : 2050 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 280 mm : 280 mm : 220 mm : 1,5 / 5 m/min : 16.5 kW : 4350 mm : 1700 mm : 1850 mm : 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length harden ...

: neu : 2025 : 090131 : prompt, Zwischenverkauf v : Türkei : 4700 € : 109.71 € : 1 : 50 mm : 155 mm : 2 : 1.5 kW : 4,5 m/min : 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm : 750 mm : 1450 mm : 390 kg 2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 60 mm : 215 mm : 215 mm : 3 : 1.5 kW : 4 m/min : 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm : 1400 mm : 1650 mm : 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090180 : prompt, Zwischenverkauf v : Türkei : 8300 € : 160.19 € : 1 : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 € : 918.71 € : 2550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4900 mm : 1150 mm : 1250 mm : 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 € : 884.33 € : 2050 mm : 11 mm : 11 mm : 9 mm : 9 mm : 7 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52700 € : 996.03 € : 2550 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 4800 mm : 1600 mm : 1470 mm : 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 € : 1948.59 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36300 € : 693.33 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of r ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 € : 305.28 € : 50 - 60 mm : 180 mm : 180 mm : 180 mm : 3 : 3.75 kW : 6 m/min : 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm : 850 mm : 1200 mm : 955 kg 3 mech. driven rolls (brake motor) hardened shafts lower rolls hydraulic adjustablehardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation digital read out for the position of the lower rolls machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 € : 603.56 € : 2050 mm : 6 mm : 6 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 € : 216.96 € : 5 kW : 265 kg : 10-114 mm : 2 : 3-22 m/s : (2x) 50 x 940 mm to grind and polish for round and oval tubes opening of sanding belts by footpedal machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 € : 916.8 € : 6 mm : 4 mm : 70 mm : 4000 mm : 550 mm : 8.75 kW : 4250 mm : 720 mm : 2000 mm : 2015 kg Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. Radius can be selected. One set of cutting blades included Min. cutting diameter: 600 mm (with adapter for small diameter 400 mm) Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm) Rotating speed 70 rpm with adjustable max. torque Top and bottom flanging rolls powered in rotation with planetary reducers Hydraulically adjustable bottom head for both, flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diamet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

Manufacturer: Sahinler Type: PK-30 F Year of construction: 2018 Shafts: 30 mm Lower rollers: 118 mm Top roller: 148 mm Rotation: 26-12 rpm Location: Homburg, Germany

Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

SAHINLER HKM 115 hydraulic ironworker machine was built in Turkey by Şahinler Metal Makina Endüstri A.Ş. It is an extremely versatile machine designed for complex machining of structural steel (S235 / S355). It is capable of performing processes such as precise hole and corner punching, as well as shearing flat bars, angle bars and bars. All these operations are performed at 5 individual workstations. Each station is controlled by two hydraulic cylinders and separate foot switch controllers. The use of this solution enables independent or parallel operation of the machine by two operators at two stations simultaneously. The stroke of each cylinder is adjustable in order to increase productivity. All of this makes the offered HKM 115 ironworker machine the perfect solution for increasing production efficiency in production facilities and locksmith workshops. The total weight of the mac ...

sheet width: 1550 mm plate thickness: 6 mm diameter of upper rolls: 228 mm drive: elektronisch zwei angetri The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sahinler RM 1050 x 3 mm Number of rolls: 3 rolls Roll capacity cold: 1050 x 3 mm Roll dia upside: 90 mm Power needed: 1,1 kW Length: 1630 mm Depth: 700 mm Hight: 1200 mm Weight: 480 kg

sheet width: 2100 mm plate thickness: 2,0 mm distance between columns: 2150 mm roll diameter: 90 mm total power requirement: 1,5 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,5 x 0,7 x 1,3 mm Sheet metal bending machine 3 rollers - 2 driven rollers - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand Sahinler Model: PK 35 Year of Make: 2024, Unused Capacity (Kw) 1.5 Voltage 400 Frequency (Hz) 50 Dimensions LxWxH (mm) 1000 x 750 x 1400 Weight (Kg) approx. 400 Quantity in stock 4 Made in Turkey Ø Diameter (mm) 50 Comments Unused machines for competitive prices, multiple units in stock, footpedal included

plate thickness: 0,8 mm 0: 52 mm weight of the machine ca.: 30 kg Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm 0: 62 mm weight of the machine ca.: 50 kg Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 t punching cross-cut in cmm: 28 in 15 / 38 in 11 mm square edge steel: 35 x 35 mm L-beam: 120 x 120 x 12 mm round bar steel: 40.0 mm flat steel: 200 x 20 / 300 x 15 mm blade length: 317 mm throat: 220 mm work height max.: 940 / 1140 mm strokes per minute: max. 26 work stroke: max. 55.0 mm oil volume: 23.0 ltr. total power requirement: 4.0 kW weight of the machine ca.: 1440 kg Dimensions (HxWxD): 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Em ...

Key data: 250 mm, 3300 mm

Sahinler BMS 250 - Metal Band Saw - Incl. rolling trestle, saw blade & operating instructions - Year of construction 1997 Technical data - Capacity round: 250 mm - Square capacity: 250 x 250 mm - Flat capacity: 250 x 250 mm - Saw band dimensions: 3300 x 27 x 0.9 mm - Belt speeds: 20 / 30 / 50 / 70 / 85 m/min - Motor power: 1.3 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 1800 x 1500 x 900 mm - Weight: approx. 430 kg

3 driven rolls conical bending overload protection hardened rolls 2 digital readouts for positioning or bottom rolls Number of rolls: 3 rolls Roll capacity cold: 2050 x 25 mm Roll dia upside: 320 mm Dia under roll - side rolls: 310 mm Power needed: 22 kW Length: 4600 mm Depth: 1950 mm Hight: 1750 mm Weight: 10,5 ton

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 € : 572.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 € : 233.28 € : 0.4 - 2 mm : 100 mm : 200 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 € : 389.95 € : 1 : 0.6 - 4 mm : 300 mm : 900 mm² : 80 mm : 10 Nm : 2.62 kW : 1000 mm : 800 mm : 1400 mm : 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 28390 € : 542.25 € : 0.4 - 3 mm : 300 mm : 900 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 € : 593.63 € : 0.4 - 3 mm : 400 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3100 mm, 16 mm

- Year of construction 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Stroke rate: 10 /min - Oil tank: 410 l - Engine power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Rated current main fuse: 100 A - Dimensions WxHxD: 3750 x 2400 x 3425 mm - Weight: 13800 kg

Key data: 100 t, 2550 mm

The dimensions of the machine are LxWxH 2000mm x 3400mm x 2850mm. The weight is 7400kg. The machine is in a little-used condition.

The dimensions of the machine are LxWxH 2500mm x 1600mm x 2500mm. The weight is 8250kg. The machine is in a little-used condition.

Key data: 2550 mm, 4 mm

Hesse & Co MS 2504 - Guillotine Shears with Geared Motor - Year of construction 2011 Technical data - Cutting capacity: 4 mm - Cutting length: 2550 mm - Cutting angle: 1° 30' - Stroke per min: 42 - Table width: 450 mm - Table height: 800 mm - Back gauge (max. length): 750 / 100 mm - Motor power: 7.5 kW - Operating voltage: 400 V - Dimensions WxHxD: 3050 x 1330 x 2260 mm - Weight: 3300 kg

Key data: 40 t, 2050 mm

Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control - 3 controlled axes (Y1, Y2, X) - Manual Wila crowning table - 2 adjustable support arms - Light barriers - Incl. bending tools & operating instructions - Year of construction 2008 Technical data - Pressing capacity: 40 t - Bending length: 2050 mm - Distance between stands: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Projection: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : 1000 mm : 300 mm : 11 kW : 2110 mm : 1000 mm : 2450 mm : 2400 kg : 1 : 610 mm : 1020 mm : 5 mm/s : 10 mm/s : 8 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : 1500 mm : 300 mm : 7.5 kW : 2630 mm : 1000 mm : 2275 mm : 2500 kg : 1 : 680 mm : 1520 mm : 5 mm/s : 10 mm/s : 6 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand operating panel height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : fix : 1520 mm : 300 mm : 1520 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 10 mm : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2450 mm : 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : fix : 1500 mm : 300 mm : 1520 mm : 680 mm : 10 mm/s : 5 mm/s : 6 mm : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2275 mm : 2500 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand operating panel Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 2050 mm : 4 mm : 140 mm : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 € : 213.12 € : Schwenkrahmen : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.37 kW : 2.2 kW : 0.12 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 € : 786.92 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5.5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ca. 12 - 14 Wochen ab Auf : Türkei : 21400 € : 5 mm : 1200 mm : 4,1 m/min : 3000 mm : 750 mm : 1400 mm : 1350 kg : 250 / 2000 mm : 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Inside cutting system According to EC safety regulations Operating manual Optional equipment (prices on request): 1 spare blade set Flanging attachment with 1 set rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29800 € : 569.18 € : Doppelsäulenführung : 5400x41x1,3 mm : 20-100 m/min : 450 mm : 425 mm : 695 x 425 mm : rund 430 mm, quadrat 425 : rund 320 mm, quadrat 290 : 690 mm : 0.55 kW : 4 kW : 0.12 kW : 3090 mm : 1200 mm : 1940 mm : 1630 kg double linear guides hydraulic-mechanical bandtension saw bandbrush infinitely variable cutting speed sensitive cut regulation bi-metal saw band 41 coolant device thermal overload protection heavy duty gear optical height adjustment 3 ° inclined band hydraulic clamping of the vice user manual in GERMAN or ENGLISH OPTIONS: hydraulic vertical clamping micro cooling unit chip conveyer laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080091 : prompt, Zwischenverkauf v : Türkei : 51120 € : 966.17 € : 1 : 60 to : 2550 mm : Y1 / Y2 und X Achse : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 120 mm/s : 9 mm/s : 70 mm/s : 620 (mit optionaler R-Ach mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table interm ...

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 € : 284.16 € : 1 : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 80 mm : 1600 mm : 1550 mm : 2000 mm : 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7300 € : 140.89 € : 10 to : 185 mm : 150x8 mm : 450x900 mm : 150 mm : 60 mm : 10 mm/s : 10 mm/s : 1.1 kW : 915 mm : 900 mm : 450 mm : 1130 mm : 250 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 € : 455.04 € : 40 to : 800 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 € : 504.24 € : 1 : 40 to : 1500 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2000 mm : 950 mm : 1900 mm : 1800 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 € : 100.36 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 8700 € : 167.91 € : 250 mm : 6 mm : 3 mm : 25 1/min : 90 ° : 4 kW : 950 mm : 780 mm : 1115 mm : 585 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070236 : September 2026, Zwischenv : Türkei : 6900 € : 133.17 € : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 € : 247.68 € : 40 to : 285 mm : 200x24 mm : 660x1250 mm : 250 mm : 80 mm : 10 mm/s : 10 mm/s : 4 kW : 930 mm : 1250 mm : 650 mm : 1250 mm : 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 € : 540.53 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2500 mm : 1200 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 € : 236.16 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090086 : prompt, Zwischenverkauf v : Türkei : 7400 € : 142.82 € : 1 : 197 mm : 4 mm : 2 mm : 20 1/min : 90 ° : 4 kW : 890 mm : 780 mm : 1115 mm : 550 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 80100 € : 1513.89 € : 60 to : 350 mm : 550?850 mm : 600?1000 mm : 600 mm : 100 mm/s : 10 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2850 mm : 5350 kg : 170 bar : 24 to : 150 mm : 100 mm : 156 bar : 65 mm/sec. : 470?650 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 74100 € : 1400.49 € : 100 to : 300 mm : 600 x 900 mm : 700x1100 mm : 550 mm : 100 mm/s : 8,5 mm/s : 165 mm/s : 11 kW : 2100 mm : 2050 mm : 3050 mm : 6500 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 25400 € : 485.14 € : 40 to : 1250 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 970 € : 1 : 1.2 mm : 100 mm : 140 nm : 7 Stk. : 62 mm : 560 mm : 220 mm : 500 mm : 50 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 91200 € : 1723.68 € : 100 to : 500 mm : 600 x 900 mm : 700 x 1100 mm : 750 mm : 320 mm : 100 mm/s : 8,5 mm/s : 165 mm/s : 11 kW : 2100 mm : 1900 mm : 3350 mm : 7300 kg : 240 bar : 30 to : 200 mm : 120 mm : 170 bar : 52 mm/sec. : 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 € : 470.4 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 57300 € : 804.11 € : 1 : 42100 € : 60 to : 2100 mm : X und Y Achse : 160 mm : 1700 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 7.5 kW : 2450 mm : 1600 mm : 2235 mm : 4340 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms laser safety device Fiessler motorized crowning table intermediate pieces for the upper tool clamping die holder for 60 mm tools die with 4 V openings upper tool, slightly cranked, sectioned foot pedal user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 71300 € : 1347.57 € : 30 to : 300 mm : 500?800 mm : 600?900 mm : 550 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2800 mm : 4850 kg : 160 bar : 12 to : 150 mm : 80 mm : 130 bar : 100 mm/sec. : 500x600 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14200 € : 272.64 € : Schwenkrahmen : 4160x34x1,1 mm : 20-100 m/min : 320 mm : 320 mm : 610x320 mm : rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm : 0.37 kW : 2.2 kW : 0.12 kW : 2100 mm : 1200 mm : 1350 mm : 1150 kg : rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 € : 643.67 € : Doppelsäulenführung : 6300 x 41 x 1,3 mm : 15 - 120 m/min : 440 mm : 440 mm : 640 x 440 mm : rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm : 1.1 kW : 4 kW : 0.12 kW : 3150 mm : 1850 mm : 2115 mm : 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 € : 1976.94 € : Doppelsäulenführung : 10430x54x1,6 mm : 20-100 m/min : 750 mm : 1300x700 mm : rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm : 4 kW : 11 kW : 0.12 kW : 5500 mm : 2280 mm : 3400 mm : 8500 kg Hydraulic vice Digital display for angle indication Hydraulic saw arm clamping Manual saw arm rotation Continuously adjustable saw arm lowering speed Automatic saw frame lifting after cutting Sensitive cutting pressure regulation depending on material properties Hydromechanical blade tension readable via pressure gauge Mobile control panel Heavy-duty, helical-toothed conical gear Driven chip brush Blade guidance via carbide plates and rollers Automatic blade breakage protection Coolant system Hydraulic saw frame lifting Operating instructions in GERMAN or ENGLISH OPTIONS: Roller tables and band s ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 82900 € : 1566.81 € : Doppelsäulenführung : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 1000 x 600 mm : rechteck 660 x 600 mm : rechteck 440 x 600 mm : rechteck 660 x 600 mm : 880 mm : 4 kW : 7.5 kW : 0.12 kW : 4400 mm : 2270 mm : 2660 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was crea ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 27700 € : 529.07 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 € : 1631.07 € : 150 to : 300 mm : 950x650 mm : 1200x750 mm : 550 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3250 mm : 8200 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 1000x740 mm : 765 mm : 250 mm/s : 10-20 mm/s : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 750x615 mm : 630 mm : 300 mm/s : 10-25 mm/s : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 71000 € : 1341.9 € : 150 to : 300 mm : 750x500 mm : 1000x700 mm : 500 mm : 10 mm/s : 3,5 mm/s : 22 mm/s : 7.5 kW : 2300 mm : 1400 mm : 2750 mm : 7700 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 52500 € : 992.25 € : 60 to : 250 mm : 500x430 mm : 750x500 mm : 450 mm : 26 mm/s : 8,5 mm/s : 47 mm/s : 7.5 kW : 1820 mm : 960 mm : 2400 mm : 4000 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.