holzkraft peripheral equipment e.g. heating, conveying, drying used for sale

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

Key data: 45 °, 1600 mm, 1000 mm

Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover

HOLZKRAFT FBS-740-2 F32 Bandsaw Voltage: 400 V / 50 Hz Motor Power: 5.5 kW Max Cutting Width: 710 mm Max Cutting Height: 500 mm Max Cutting Speed: 1000 m/min Weight: 880 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

0: 4 St. 0: 120 mm Feed speed: stufenlos, 3-18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3 St. 0: 80 mm Feed speed: (4 Stufen): 4/8/9/18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 °, 3200 mm, 1450 mm

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...

Table milling machine - swivel spindle milling machine Manufacturer: Holzkraft Model: Tecnomax T50 Year of Make: 2007 Spindle swivel Feed unit Manufacturer: Maggi Model: Steff 2034

Slotted Hole Drilling Machine Holzkraft Type LLB 16 H Item No. 532 6617 Year of construction 2010 With dowel device Table size 500 mm x 200 mm Drilling width 200 mm Drilling depth 150 mm Drill head height adjustment 150 mm Wescott Drill Fiutter 0-16 mm Speed 3000 rpm. Motor power 1.1 kW Table fixed Drilling unit movable Weight 120 kg

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

Precision design for the professional with high cutting performance and many equipment options Description Heavy-duty design with high dead weight for maximum smoothness Particularly smooth and precise running thanks to torsion-resistant machine housing Cast flywheels with rubber coating and cleaning brush 3-roller precision saw blade guide at the top and bottom as standard Large grey cast iron saw table, swivelling from 0° to +15° with ground and polished surface Large cast iron rip fence with round rod guide, easy to move Saw Blade Tension Indicator Precise cutting height adjustment via rack with millimeter scale Self-braking motor Available on request Version with cutting height up to 1650 mm Other special designs Table, motor and switch must be assembled on site Technical data Dimensions and weights Length (product) approx. 1050mm Width/depth (p ...

Intake manifold Ø 120 mm Rated speed 2,874 rpm Nominal flow 814 m³/h Negative pressure at VNenn: 2,180 Pa Rated current 3.4 A Motor power 1.5 kW Connection 400V/3~/50Hz Fuse 16A Weight 117 kg Filter Cat M Filter Regeneration: Hand Shaking

Description - Particularly smooth and precise running thanks to a torsion-free machine housing and a solid substructure made of sheet steel - Cast iron saw table with precisely ground and polished surface - Convenient laser setup for cutting line marking - Saw blade quick clamping via eccentric lever on the rear of the machine - Two speeds as standard - Precise 3-roller saw blade guides, top and bottom as standard - Quick cutting height adjustment via rotary knob and rack with millimeter scale - Smooth-running aluminium rip fence with eccentric quick clamp and magnifying glass - Standard angle stop, adjustable by 60° on both sides - Safety switch for automatic shut-off when the door is opened Technical data Dimensions and weights Length (product) approx. 1020mm Width/depth (product) approx. 880mm Height (product) approx. 1982mm Weight (net) approx. 187kg Connection su ...

Description - TERSA planer blade system enables particularly quiet operation. - Helical toothed steel feed roller for constant and uniform material intake - Two-speed material feed - Numerical display for thickness table height - The 2,000 mm long dressing tables enable easy dressing of large workpieces. - Work tables are made of grey cast iron, post-annealed and stress-free, making them insensitive and permanently flat - Sturdy large aluminium dressing stop with round bar guide (1200 x 160 mm) - Thickness table adjustment via handwheel with numerical display for the planing height - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Technical data Dimensions and weights Length (product) approx. 2000mm Width/depth (product) approx. 1110mm Height (product) approx. 1115mm Weight (net) app ...

Description - With TERSA knife shaft for razor blade changes in seconds - TERSA planer blade system enables particularly quiet running - Helical toothed steel feed roller for constant and even wood feed - The particularly long dressing tables made of one piece enable easy dressing of the workpieces - Large dressing stop can stay in place when opening the dressing tables - Rear-opening dressing tables - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron constructionWork tables made of grey cast iron, after-annealed and stress-free, therefore insensitive and permanently flat - Table lips for quiet running Technical data Dimensions and weights Length (product) approx. 1725mm Width/depth (product) approx. 880mm Weight (net) approx. 270kg Dressing Total length of tables 1500mm Working height900mm Chip ...

Wheel diameter: 510 mm Cutting height: 350 mm cutting width: 500 mm Motor output: 3,5 kW Table dimensions: 640 x 500 mm Table tiltable: 0-45 Grad Dimensions (L/W/H): mm machine weight ab.: 295 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table milling machine wood power with 3-roller feed Type: Minimax t45c LL Year of Make: 2022 CE Table milling machine with rigid milling spindle, gray cast iron work table, Table extension and pull-out workpiece support and 3-roller feed VSA 38 B1 - Work table L 1945 mm x W 695 mm, table height 900 mm - Spindle speeds 3500/7000/10000 rpm. - Spindle protrusion over table max. 130 mm - Milling spindle right-left rotation - Useful length of the spindle 100 mm - Spindle diameter 30 mm - Tool diameter can be lowered max. 180 mm - Tool profile milling diameter max. 210 mm - Motor 5 kW 400 V 50 Hz - Suction nozzle 2 pieces each 120 mm diameter - Incl. aluminium stop jaws, table extensions left and right, sheet milling protection cover and extendable workpiece support (up to 1950 x 550 mm) on the machine front Very good condition Machine dimensions L 1945 mm x W 575 mm  ...

Wood Band Saw Holzkraft HBS 840 AS Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 45 °, 2250 mm, 900 mm

400 V, 50 Hz, 5 Kw, 10 A, Sliding table 2250x270 mm, Boom table 950x600 mm, Cut-to-length stop 2650 mm, extendable, Cutting width 900 mm, Cutting height 90 mm, Saw blade 250-315 mm, Extraction connection 125 mm, Work table 1500x1000 mm, Weight 410 kg

Clean air extraction system Holzkraft Type: RLA 125 Year of Make: 2001 CE Nominal volume flow 1095 m³/h Min. volume flow 884 m³/h Intake manifold diameter 125 mm Motor power 1.5 kW Voltage 400 V /3 Ph /50 Hz Rated speed 2800 rpm Rated current 3.5 A Protection class IP 54 Air filter version Filter cassette 1 x Item no. 0541213 Filter cleaning manually Chip collection volume 165 ltr. Suitable for vacuuming and separating dry wood and wood. Plastic chips BG-tested Dimensions L 1100 mm x W 830 mm x H 1600 mm Weight approx. 205 kg

Conveyor with modular belt, stopband, stopwatch with dimensions: tape width 510 mm Tape length 1800 mm SEW geared motor with brake 075 kW, 1380/42 rpm Self-collection in the area: Kędzierzyn-Koźle, Opole Voivodeship or by arrangement. This product is in stock. Joanna Multi-Industry Company + 77 482 44 99

Type HLP Voltage 220 V Power 400 W Length 120 mm Diameter 8 mm Made in Germany Weight 70 g

Length 1155mm Thread diameter 47 mm Power 1500 W Voltage 230 V Transport dimensions 1220x70x70 mm Weight 0,8 kg

HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 7,770.00 for two gluing units: EUR Price on request Delivery time: approx. 4 weeks

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x1170x2300 mm Weight: 650 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 720x1000x1900 mm Weight: 300 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Complete saw dust drying line Consists of various equipment (screw loaders, wood chip furnace, three way compact rotary dryer AVM-0.65, fan, cyclone and other)

Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

Manufacturer: IST UV Trafo für 40 Watt Lampen, Type: IST,

Manufacturer: IST UV Trafo für 40 Watt Lampen, Type: IST,

Manufacturer: IST UV Trafo für 80 Watt Lampen, Type: IST,

Manufacturer: Superfici UV Trockner, Work piece width min-max mm: 10-1300, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3+1, kW power all lamps: ca.50, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, Conveyor lenght mm: ohne Transport,

Manufacturer: Cefla, Type: TLF/B1-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 2, Drive power kW: ca. 0,75, Electrical power consumption kW: 20, Year :1999

SECOND-HAND DRYING KILN COPCAL - traditional heating system - capacity 70/80 mc - dimensionst mt 9,5x6x5+1H

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Manufacturer: Cefla, Type: TLF/B2-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 2, Drive power kW: ca. 0,75, Electrical power consumption kW: 37, Year :1999

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 17.15, Lampen gerade eingebaut: yes, Lampen von unten: no, Year :1995

Manufacturer: Technigraf , Type: Aktiprint S, Year: 2002, Work piece width min-max mm: 1300, Number of lamps: 2, Lampen gerade eingebaut: 2, Power per lamp watt UV: 2 x 120, Working hight approx mm: 5 - 35, Conveyor: PTFE Band, Through running hight mm: 20, Year :2002

Manufacturer: IST, Type: Lignocure, Year: 1993, Number of lamps: 2, kW power 1 lamp: 80, kW power all lamps: 20, Adjustable: no, Position of lamps: gerade, Working widht mm: 1350, Stabteilung mm: 120, Conveyor length mm: 3500, Chain pitch mm: 120, Outer belt width mm: 1600, Working hight approx mm: 950, Feeding speed m/min: 5-20, Drive power kW: 0.75, Year :1993

I am selling a disassembled Kovos SR 4 dryer without electronics. Without thermal insulation (glass wool) 2x fans, 2x heating coils. Dimensions of the dryer: Exterior height 3.2 m x width 4.1 m x length 4.55 m, interior height 2.1 m x width 3.8 m x length 4.1 m. The dryer is complete, it is possible to visit it partially built. Described parts for assembly. Material aluminum, very good condition. It was stored in the hall for 15 years.

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: IST, Year: 1996, Number of lamps: 1, kW power 1 lamp: 11,4, Adjustable: no, Power per lamp watt UV: 80, Working widht mm: 1350, Stabteilung mm: 80, Conveyor length mm: 2500, Outer belt width mm: 1650, Working hight approx mm: 950 +-, Feeding speed m/min: 2,5-6, Conveyor: Stange, Drive power kW: 2, Exhaust air diameter mm: 180, Year :1996

Manufacturer: IST, Year: 1992, Number of lamps: 1, Power per lamp watt UV: 80 W/cm, Working widht mm: 1.400, od distance mm: 100, Conveyor length mm: 3.200, Outer belt width mm: 2.300, Working hight approx mm: 950, Feeding speed m/min: 10 - 20, Working widht mm: 1.400, Through running hight mm: 80, Rod transportation: yes, Year :1992

Manufacturer: Purete, Type: PRT-U1113X, Year: 2019, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 3,78, Lampen gerade eingebaut: yes, Lampen von unten: no, od distance mm: 38,7, Conveyor lenght mm: 1.200, Drive power kW: 1,2, Rod transportation: yes, Electrical power consumption kW: 5, Required space L x W x H mm: 1.200x1.850x1.750, Year :2019

Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004