hymmen gluespreader machines used for sale

Working width: 1400 mm Technical description: Operating side: right Working height: 900 mm, adjustable: +/-50 mm Width: 1400 mm EFF. Usable width: width 100 mm Clearance height: 120 mm Feed transport: 8.0 25.0 m / min frequency controlled Levelling roller: 0.7 5.7 m / min frequency controlled Material work piece: wood, wood, rigid Dimensions (min.) Thickness width length: 5 50 300mm Dimensions (max.) Thickness width length 80 1300 2000mm Tolerance max. Roller width +/-0, 2 mm Material coating: UV curable coatings and flowing coats Processing temperature: 18 ° c. Viscosity: up to 140 DIN sec, Ford 4 cups Drive type: Three-phase frequency inverter Power consumption: CA. 1,5 kW Mains voltage: 400 V / 50 Hz with power N-conductor Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar, min. 5 bar max. 8 bar Weight: 1.300 kg

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

Spare roller: TLX/ELX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 200, EPDM: yes,

Manufacturer: Hymmen Ersatzwalze 1400 mm Muss gummiert werden, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Stahlkerndurchmesser ca. mm: ca 200, Rubber coating defective: yes, Can be reground: no,

Hersteller : Hymmen, Spare part from machine: Elx S Lackauftragsmaschine,

Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004

Manufacturer: Hymmen Lackuftragswalze 1400 mm Stahlkern 210 mm Aussendurchmesser 236, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 40, Approx. thickness of rubber coating in mm: ca.30,

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

Manufacturer: Hymmen, Type: SGC, Year: 1999, Control: Hymmen, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: rechts, Vorschub Transport m/min min - max: 5-25, kW - Leistung Transport: 0,75, Glättewalze mm: yes, Glättewalzengeschwindigkeit: 5-25, Year :1999

Manufacturer: Hymmen, Type: TLX 2,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Metering roller drive m/min: ca.4-12, rbakel: yes, Compressed air bar: 6, FREE TEXT: ohne Schaltschrank, Year :1982

Manufacturer: Hymmen , Type: Kaschieranlage, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1350, Working width min min mm: 300, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Casein glue plant: yes, IR zone: yes, Leimauftragsmaschine : yes, Double-sided: yes, Lamination calender: yes, Diameter of lamination calender in mm: ca.500, Press calender: yes, Rollers heated: yes, Heating medium thermal oil: yes, at top and bottom: yes, Automatical glue supply: yes,

Manufacturer: Hymmen, Type: TLX M, Year: 1992, Work piece width min-max mm: 1300, Working widht max mm: 1300, Operating side: links, Working height: ca 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Year :1992

Manufacturer: Hymmen , Type: TLA, Year: ca.1990, 4 roller machine: yes, Work piece width min-max mm: 30-1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3-120, Diameter of roller coater mm: ca.230, Year :ca.1990

Spare roller: Multicoater, Hymmen: yes,

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1300, Working height: links, Vorschub Transport m/min min - max: yes, Dosierwalze 1 m/min min-max: yes, Year :1995

Manufacturer: Hymmen, Type: BVK, Year: 1995, Work piece width min-max mm: 1350, Number of brushes: 2, Brushes inclinedt: 2, Working hight mm: ca 980, Year :1995

Manufacturer: Hymmen Glättewalze, Type: SGC, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1.350, Min.-max. workpiece height in mm: 3 - 80, Working height: links, Lackauftragseinheiten: ca. 980, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: links, Lackauftragseinheiten: ca 980, Vorschub Transport m/min min - max: yes, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Control: Hymmen, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: rechts, Year :1995

Manufacturer: Hymmen, Type: BVK, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 120, Purpose: Beizvertreiben, Number of brushes: 2, Brushes inclinedt: 2, Diameter of brushes: 150, Power per brush kW: 0,75, rotations controlled: 150-750, Feeding speed min-max m/min: 5-20, Vaccum conveyor belt: yes, FREE TEXT: Maschine bekommt neuen Schaltschrank und die Bürstengeschwindikkeit wird Drehzahl geregelt, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 80, Working height: rechts, Lackauftragseinheiten: ca 980, Vorschub Transport m/min min - max: yes, Year :1995

Manufacturer: Hymmen Lackwalze ELX 1.0 Bedienseite links, Type: ELX 1,0, Year: 1995, Work piece width min-max mm: 1350, Durchlassbreite min-max mm: 1350, Working height: rechts, Lackauftragseinheiten: 980, Vorschub Transport m/min min - max: yes, Year :1995

Manufacturer: Hymmen Lackersatzwalze shore 50, Spare roller: TLX-ELX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1397, Approx. thickness of rubber coating in mm: 20, EPDM: yes,

Ersatzwalze für: TLX, Hymmen: yes, Gummiert Walze: yes, Gummierte Länge cm: 1400, shore Härte: ca.35, Stärke Gummierung ca. mm: 20, Stahkerndurchmesser ca. mm: 215, EPDM: schwarz,

Manufacturer: Hymmen, Type: TLX, Year: ca. 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Through running hight mm: Maschine wird gereinigt, geprüft und neu lackiert, Year :ca. 1990

Spare roller: ELX und TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20 Schwarz, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Gummiqualität : neu,

Manufacturer: Hymmen, Type: TLX 1,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Year :1982

Manufacturer: Hymmen Stahldosierwalze Chromwalze 1400 mm 197 Durchmesser, Hymmen: yes, Roller rubber coating: Chrom, Approx. thickness of rubber coating in mm: Stahl 1400 mm, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Hymmen Lackwalze für TLX Länge mm 1400 shore 60 Walze muss geschliffen werden, Spare roller: TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 60, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Rubber coating defective: yes,

Manufacturer: Hymmen Lackauftagswalze, Bürkle: yes, Rubber coating length cm: 1398, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Sponge rubber: yes,

Manufacturer: Hymmen, Type: TLX - M, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX-M1, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M1.0, Year: 1989, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1989

Manufacturer: Hymmen, Type: TLX M, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: rechts, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hymmen, Type: TLX M2, Year: 1990, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1990

Manufacturer: Hackemack Rollengang, Type: 3420, Total metres approx.: 5, Working widht mm: 1400, Total hight mm: 980, Adjustable: yes, Roller pitch mm: 100, roller diameter: 60, Length mm: 5000, Accumulation roller conveyor: Friktionsrollrnbahn, Driven: yes, Working widht mm: 1400, Width total mm: 1600, Conveyor speed m/min: 5-30, Drive power kW: 2 X 3,

Manufacturer: Hymmen, Type: TLX-M, Year: 1991, Control: yes, Operating side: rechts, Arbeitshöhe: 850, Stain roller: yes, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: yes, Attachment bracket roller: yes, Reverseantrieb: yes, Rakeleinrichtung: yes, Werkstückdicke max mm: 80, Work piece length min mm: 250, Feeding speed min/max: 6 - 40, Roller lift out: yes, Hight adjustment by engine: yes, Transportart: Band, Pump system: yes, Compressed air bar: 6, Wight approx. kg: 2000, Required space L x W x H mm: 940 x 2350 x 1600, Year :1991

Hymmen glue application machine 4 Roller Glue Dispensing Machine Type LA 4W Working width 1300 mm 2 rubberized fluted rollers The rubber lining/fluting is in poor condition See pictures 2 rubberized smooth rollers Ribbed rollers diameter 230 mm Smooth rollers diameter 180 mm Maximum passage height 100 mm Application speed 10 and 20 m/min. Motor power 1.1 kW Emergency out of leverage Dimensions 1950 mm x 1100 mm x H 1150 mm Weight with pallet 1300 kg Machine is function-tested Sale in actual condition

A roller coating machine specially designed for UV coating in the wood industry is available. Working width: 1350mm, max. workpiece thickness: 80mm, working height: approx. 980mm, application roller: 1350mm, feed speed: 5m-25m/min, machine dimensions X/Y/Z: approx. 2700mm/1200mm/1800mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in  ...

This HYMMEN TLA was manufactured in 2002. It features a glue spreader with 4 rollers and a working width of 1400 mm. Consider the opportunity to buy this HYMMEN TLA glue spreader. Contact us for more information.

Manufacturer: Hymmen, Type: JPT LW 2200/280, Operating system: Windowx XP, Software: K-Flow, Hardware: yes, AV Arbeitsplatz: yes, Bedruckbares Material: Papier,MDF,Kork, Working hight mm: 900, Nennbreite mm: 2300, Eff. Nutzbreite: 2100, Through running hight mm: max 50, Druckgeschwinidigkeit m/min : 25 (bei 360dpi), Anlagengeschwindigkeit m/min: 15-50, Single pass: yes, Year: 2010, Bedruckbares Material: Papier,MDF,Kork, Papiere: Rollenmaterial, Papierbreite min-max: 600-2100, Papiergewichte g/m²: 60-120, Papierrollendurchmesser max.: 800, Rapportlänge mm: 2600, MDF/HDF: yes, Fussbodendielen: yes, Werckstückdicke min-max mm: 5-17, Plattenbreite min-max mm: 500-2100, Plattenlänge min- max mm: 500-3000, Plattenwelligkeit mm: 3, Fussbodendielen: yes, Dicken mm min-max: 5-17, Längen mm min-max: 500-4500, Breiten mm min-max: 90-400, Welligkeit mm : 3, Tinten UV härtend: yes, Rollena ...

Manufacturer: 3 Lampen Purete UV-Trockner PRT-U3106e 120 Watt elektronische Leistungregelung 620 mm, Type: PRT-U3106e , Year: NEU, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2-80, Number of lamps: 1, kW power 1 lamp: 8,4, Lampenlänge mm: 700, Reflektor von oben abnehmbar: zur Bedienseite, Gesamtlänge UV Modul mm: 2.300, Lamps straight installation: yes, Strahlereinheit UVM: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Abluftmenge cbm/h: 1200, Leistung Abluftventilator kw: 0,5, Working widht mm: 25, Conveyor lenght mm: 38, Outer belt width mm: 38, Working hight approx mm: 1.150, Conveyor: 5 - 25, Drive power kW: Stange, Working widht mm: 200, Weight approx. kg: 2.300 X 1.150 X 1.750, ...

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1

Working height 900mm Nominal width 1400mm Effective working width 1370mm Rolling pressure force max 5kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 350mm Panel thickness min 3mm Glue hot melt PUR Application rate 40-80g/m Driving power 6kW Tempering device 24kW

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

WEIBERT WJ-K315R Circular sawing machines Formatschiebetisch: 2700mm Engine power: 4 KW (5.5 HP), 400V, n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° Before scoring unit: With motor WJ-S315R-4KW 2.7 SPECIAL PRICE

NEW MACHINE With Formatschiebetisch 2, 60m Saw blade 250-315 mm Swivel: 90 °-45 ° Planing width 410 mm 4 cutter Blade (no setting more) Dressing table length of 1800 mm Clearance height of 4-225 mm Milling cutter: 90 °-45 ° swivel to the rear Blower rpm: 3000/4000/5000/6000 / 8000 and 10000 RPM Vertical lift 160 mm Engine power: 3 engines 3 KW400 V (4,0 PS) S1 100% continuous operation WJ-500300 Special price: NET Options: Before scoring unit with motor Guide fence 900 mm Integral safety rail 500 mm Westcott Chuck 0-16mm Milling Eccentric clamp Right - and left-hand rotation (BUR) Engine 4.0 KW (5.5 HP) S1 100% Planer blade 410 HSS G & WJ-BA-410-HSS

Edge grinding with oscillation and veneer sanding WEIBERT new WJ-KS30 400V 3 KW (4 HP) n = 2840 RPM Work table 960 x 350 mm Table height 230 mm Belt rear 1050 x 200 mm Belt speed 20 m / sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 PS) A/can be switched off Machine table and guides made of grey cast iron Quick adjustment of tilting 90 °-45 ° with degree display Weight 400 kg Dust nozzle 120 mm Rollers pull-out extension table Band width 150 mm WJ-R00200 option: Band width 200 mm WJ R00300

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

Wood machining center WJ-CU-32 400V 3-motor 4 KW (5.5 HP), Formatschiebetisch 2300mm, square table with telescopic and the back fence a usziehbar as a guide fence-45 ° / 90 ° / + 45 ° (swivelling) can be used. Saw unit 90 °-45 ° swiveling Doppelaufhaengeung of the unit. Saw blade 250-315 mm. Parallel cutting width 860 mm, Speed of up to 4000 rpm, Before scoring unit with motor, tiller 30s spindle, Usable height 125 mm, 90 °-45 ° to the rear swivel, Double suspension of unit, Rpm: 3000/4000/5000/6000/8000 and 10000 RPM.,. Diameter of table opening of 260 mm, dressing planing width 320 mm, length 1500 mm, Paralleiogrammverstellung of tables, Dual opening system of the tables in the back, Planing fence 90 °-45 ° swiveling,. 4-225 mm, passage height Feed speed of 8 m / min., Dust nozzle 120 mm, all units and tables from MASCHINENGRAUGUss! G & WJ-CU320N s ...

WEIBERT WJ-SAe-FR2 2.3 3-3.2 Formatschiebetisch: 2300 mm to 3200 mm) Cutting height: 103 mm Blade 90 °-45 ° swiveling. 315 mm Scoring unit: separate drive Milling spindle: swivel Blower RPM & #65279;: 1400/3500/6000 and 8000 min. Motor power: 5KW streaked 400V 50 Hz Saw: 4KW OPTIONS for an additional fee available! Integral safety rail 500 mm Left and right rotation Suction pipe with suction hose Degree grid system on the boom G & WJ-SAe-FR2 2.3/3.0/3, 2m SPECIAL PRICE PLEASE REQUESTS! OPTIONS for an additional fee available!

AUTOMATIC GLUE SPREADER type OMMA OPEN 1400 year 2003 CE mark : YES technical details : useful working width mm. 1400 max. working thickness mm. 80 working speed : 18 mt/min. spreading rollers diam.mm.250 dosing rollers diam.mm.185 installed power kw 1,6 weight kgs. 1200 volt. 380/50 standard details : - separate electric box - automatic cleaning device for spreading rollers - pressure-free side seals with antifriction flanges to avoid any overheating when long shifts and high working speeds are involved too - careful and sensitive adjustment of the dosing rollers by geardrives - large diameter spreading and dosing rollers - high uniformity of the spreading on full working width - separate gearmotor - collecting tank of the cleaning water - electric plant realized in accordance with high standards with low voltage on secondary circuits, all electric components in ...

AUTOMATIC COPY SHAPER machine type BALESTRINI CP 4 second hand machine Technical Details : machine composed by 4 units : 2+2 shaper units max. working useful length mm.2500 max. working width mm. 500 max. working heigth mm. 180 speed rotation shaper units 8500 rpm speed rotation sanding units 3500 rpm hydraulic pump motor power Hp 5,5 net weigth kgs. 3300 Volt. 380/50

CIRCULAR SAW Mod ALTENDORF F45 second hand machine CE mark . with Use and Maintenance Booklet and Declaration of Conformity digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3000 max. blade mm.400 blade group inclinable at 45° saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1000 Volt. 380/50

Veneer fuegemaschine Refil 31 P Length 300 cm Year of construction 1980 Weight approx. 580 kg L x W x H: 400 x 110 x 120 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...

CATALOG NUMBER 6024 TECHNICAL DATA - 2.9kW main engine - 0.75kW spindle motor - 0.75kW trolley feed motor - 380V power supply - dimensions length / width / height 1600x1100x1200mm - weight 891 kg Machine equipped with: - 2 tables with dimensions of 300x340mm - pneumatic clamps - angularly adjustable tables in two planes - the possibility of making long and round tenons on the tables - table speed and spindle speed regulated mechanically - adjustable up / down tables - pin width adjustment Net price: PLN 16900 Net price: EUR 3885 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations the price may change)

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

Used cutting machine Hundegger K1 Manufacturer: Hundegger, DE Type: K1 Built: 1998 Condition: used, in operation, good Available from: 06.2021 composed of: 1. Fully automatic wood conveying with feed roller conveyor 2. Lower table swivel crosscut saw 3. Universal milling unit 4 -axis 4. Combination support for horizontal tools 5. 2x Drill Rig - Drilling direction horizontal drill length: 6. 1x Chain slot unit 7. Combination support for vertically working tools with a servo drive, cross-moving on linear guides and up to 5 vertically working, hub-controlled tool slides 8. 2x drilling rig drilling direction vertically from below 9. 1x Finger cutter Vertical 10. Marking device 11. Fully automatic beam turning station 12. Transport and positioning device 13. Electronic control with operator put, on Windows XP

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

max. Working Diameter 1100 mm EXCELLENT CONDITIONS

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

CROSS-FEED SPLICER Manufactured by Fisher+Rückle Type: CROSSMASTER Model: FZR

CROSS-FEED SPLICER Width: 3400 mm

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12