ima gluespreader machines used for sale

Edge banding machine Manafacture: IMA Model: Molding edge banding machine Year of construction: 1997 Hot air unit for pre-glued edge material

Manufacturer: IMA OBK, Type: OBK, Year: 1996, Premilling: yes, Profile milling: yes, Profil sanding: no, Edgeband thickness max mm: 60, Thickness of coiled edgeband max mm: 1, Panel length min mm: 300, Work piece thickness min mm: 100, Feeding speed max m/min: 5-30, Machine lenght mm: 11000, Pressure zone star: yes, Pressure zone exchange system: 4-fach, Strip magazin: no, Trimming saw: yes, Flush milling: yes, Scraper: yes, Buffing unit: 2 Stück, Glue system granulate/cartridge: granulat, Spraying device: yes, Noise enclosure: yes, Compressed air bar: 6, Maschine kann vorgeführt werden , Year :1996

Chain plates (used) Serial No.: IMA -with rubber plate and mounting bracket -Dimensions: 80 x 60mm -more than 100 PCs available Price per piece: 4,50 euro + VAT

Milling / Beveling aggregate Serial No.: IMA -for double-sided edge banding machine (1 Unit left right side page / 1 units)

Glue tank with rollers for sanding machine IMA

Glue application machine for sanding machine IMA

I sell a stacking / destacking system MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of construction 2011. Stacking system One-sided steering / also suitable for pallets. Vacuum system (with pump) Rotazion head Automatic charging. Entrance table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Entry of feeding roller stazion for stilted material. Security fence fully complete ! Working capacity Approx. 16 cycles / min Plate height 10 - 50mm Min. plate dimensions 250 x 320 mm plate dimensions 1300 x 3000 mm Combined area L.10200mm x W.8700mm Combined power 45kW Year of construction 2011 Available the same. Ready for use, possible to check. With CE certificate and full document.

Scoring saw IMA - controllable

PU preheater IMA 2,5 kg

2 pieces available For more information, please refer to the enclosed photos.

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

This 4-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details.

This IMA AM33 - 3000 /1300 Systems unloading and stacking station was manufactured in 2005. It is a robust and reliable choice for your automation needs. Contact us for more information.

Edgethickness: 0,3 - 20 mm Edge height: 14 - 65 mm Edge length: minimum 160 mm Feedrate: 6 - 30 m/min Workpiece thickness: 8 - 60 mm Workpiece width: minimum 65 mm Workpiece length: minimum 150 mm

Post IMA Height: 980 mm with Motor 4,4 kW Motor shaft 35 mm diameter Inner thread M16 left Outer thread 35x1,5 right Price: not reconditioned, from stock Other version available on request

Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic  ...

Key data: 6800 mm, 1400 mm, 650 mm

Five-axis CNC for staircase construction Timber construction with vacuum pump Treversening table Two 12-fold tool changers and 2 additional places for saw blades up to 450mm diameter

IMA milling unit - several milling motors immediately available from stock - price on request, depending on equipment and condition

CNC processing centre Brand: IMA Type: BIMA 310V 120/600 Year: 2004 Technical data: Machining area - in X-direction without gluing 6000 mm - in X-direction motor gluing 5000 mm - in Y-direction 1200 mm - in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm max. clamping height from Upper edge of suction plate Z1 100 mm max. workpiece thickness Z 2 depending on equipment/application Worktable height: approx. 950 mm 1 main spindle with feed stroke pneum. - Drive power: 12 kW in S-1 operation - Tool holder: HSK F63, taper diameter =38 mm - Tool feed: automatic - Pull-in force: 11000 N - Tool weight: max. 6 kg - Direction of rotation: right/left rotation, programmable - Speed range: stepless 1500 - 24000 rpm, programmable - Drive: frequency-controlled three-phase motor Spindle lubrication: unique factory grease lubrication - spindle cooling: water cooling  ...

Oil-bath gearbox IMA Type: 04.015

Profile sanding unit IMA Type: 08.063

Sanding unit IMA Type: 08.062 - oscillating

Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.

Chamfering unit IMA Type: 08.055 - different motor powers available Price on request (depending on version)

various pressure zones IMA - from stock - price on request

Flat scraper IMA Type: 08.50 Price on request

Precision cutting unit IMA Type: 08.376

Grooving unit IMA Type: 08.181 - only grooving from side

Unit for grooving / precision cutting Make: IMA

Unit for precision cutting Make: IMA

Gluing unit IMA complete with double coil magazine, glue application device and pressure zone

Acoustic hoods für IMA edge banding machines in various versions and dimensions available from stock Modifications / new lacquering available for a surcharge.

Milling unit IMA - heavy version - 600 mm heigh - motors as requested Price on request (depending on equipment)

Stripe breaking device IMA

Radius profile scraper IMA 08.263

Radius profile scraper IMA Type: 08.515

End trimming unit IMA Type: 08.41 - pneumatic swivable

Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156

Grooving unit IMA Type: 08.183 - controllable - swivable

Manufacturer: IMA Doppelzerspaner, Spare part from machine: Combima, Number of motors: 2, kW-Leistung : 4.4, Siko Anzeige : yes, Baugrösse L x B x H mm: 650x650x1200, Revolver adjustment: no, Slewable vertically: no, kW-output 2: ca 4.4, Silo indication 2: yes,

Manufacturer: IMA Faseschleifaggregat, Spare part from machine: Combima, Motor : 1, kW-Leistung : 1.75, Drehzahlen U/min : frequenzgesteuert, Vertical roller sensing: yes, Baugrösse L x B x H mm: 400x700x900, Slewable vertically: yes,

Manufacturer: IMA 2 Stück Eckenkopieraggregat, Motor : 2 + 2, Drehzahlen U/min : 12000, Horizontal Rollentastung : yes, Baugrösse L x B x H mm: 800x400x600, Axis-controlled: yes,

Manufacturer: IMA, Spare part from machine: Eckenkopieren, Motor : 2, Horizontal Rollentastung : yes, Baugrösse L x B x H mm: 800x400x600,

Manufacturer: ima, FREETEXT1: 20 Stück Schutzgitter Länge 1680 mm X Höhe 1450 mm, FREETEXT2: 7 Stück Schutzgitter Länge 1400 mm X Höhe 1370 mm, FREETEXT3: Pfosten Stück Länge 1400 mm X Höhe 1370 mm, FREETEXT4: Pfosten Stück Länge 1400 mm X Höhe 1370 mm,

Manufacturer: IMA Radienschleifaggregat, Number of motors: 1, kW-Leistung : 1,75, Drehzahlen U/min : frequenzgesteuert, Vertical roller sensing: yes, Slewable horizontally: 400x700x900, Slewable vertically: yes,

Manufacturer: IMA, Spare part from machine: Vorschmelzaggregat 3-fach, Free-standing: yes, Temperature regulation: yes,

Manufacturer: IMA, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Amper 1: 50, Power kW: 9,2, N1-U/min: 1598, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Year :1996

Manufacturer: IMA Schwabbelagregat, Own drive: yes, Total hight mm: 550, Installation width mm: 400, Slewable vertically: no, Main engine kW: 4x0,18,

Manufacturer: IMA, Type: Multifunktionsziehklinge 4-fach, Scraper radius: 4-fach, Tracing by roller: yes, Automatic radii change: yes, Pillar construction: yes, Installation height: 700, Used: yes, Installation height: 700, Length mm: 500,

Manufacturer: IMA Doppelfräsständer, for left machine side: links, Number of motors: 1, kW-Leistung : 4.4, Siko Anzeige : yes, Baugrösse L x B x H mm: 750x800x800, Slewable vertically: yes,

Manufacturer: IMA, Spare part from machine: Radiusfräsen mit Achsverstellung und 3-fach Tastung, Motor : 2, kW-Leistung : 0,75, Drehzahlen U/min : 11.500, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Baugrösse L x B x H mm: 600x650x800,

Manufacturer: IMA Fräsständer tastend, Type: VS.40.09.-2, FREETEXT1: 2 Motore tastend, FREETEXT2: 1 Kw, FREETEXT3: 133 Volt, FREETEXT4: 11500 Umin, FREETEXT5: 200 Hertz,

Manufacturer: IMA Verleimteil aus Combima, Tankvolumen Liter: 1, FREE TEXT: Verleimteilhöhe 60 mm/,

Manufacturer: IMA Verleiteimteil gereinigt, Spare part from machine: IMA Combima, Gluing part left side: yes, Tankvolumen Liter: 1, Min-max height of gluing part mm: 60 mm,

Manufacturer: IMA Ersatzteil Combima, Type: Verleimteil, Tankvolumen Liter: 1,

Manufacturer: Verleimteil IMA, Ersatzteil aus Maschine: Neuwertig,

Manufacturer: IMA , Type: Fügefräsen, Motor with gear: 2 Motoren steuerbar und verstellbar, Spindle length mm: ca.60, Motor with gear: 2 Motoren steuerbar und verstellbar, Speed rpm: ca.2,2 kw/5860 , Overhauled on: inkl. Haube,

Manufacturer: IMA, Type: Transportband, Control: no, Working widht mm: 1000, Total hight mm: 920, Belt width: 1000, Total power kW: ca.1,5, Feeding speed min-max m/min: ca.10-30 über Umrichter möglich,

Manufacturer: Igel Puffer 40 Pufferplätze, Working length mm: 3450, Working widht mm: Ablagefläche ca1000 mm/fachtiefe 60 mm, Frequency converter: möglich, Engine power kW: ca.2,5, FREE TEXT: Stangenlänge 440 mm,

Manufacturer: IMA Radienschleifeinrichtung oben und unten, Spare part from machine: IMA, Profile sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 600, Max. roller diameter: 40, Slewable horizontally: yes, Sanding belt hight: 20, Slewable sanding head: yes, Sanding belt length max mm: ca.2100, Main engine kW: 2 X 0,25, Belt clamping pneumatically: yes, Hight adjustment by hand wheel: yes, radius sanding device: yes, Oscillation: no,

Manufacturer: IMA Kantenschleifaggregat, Spare part from machine: IMA, Kantenschleifaggregat: yes, for left machine side: yes, Own drive: yes, Installation width mm: 330, Max. roller diameter: 40, Vertical: yes, Pneumatically controlled: yes, Sanding belt length max mm: entspannt 1990 mm gespannt 2050, Work piece hight min-max mm: 100, Main engine kW: 1,65, Belt clamping pneumatically: yes, Oscillation: yes, System dismantled: yes,

Manufacturer: IMA Verleimteil, Spare part from machine: IMA AVM , Year: ca.1990, Gluing part left side: yes, Own drive: Ölbadatrieb, Min-max height of gluing part mm: 90 Walze, Plug connection: yes, Temperature regulation: yes, Year :ca.1990

Manufacturer: IMA Kantenfräsen tastend von oben, V1: 133, Hz 1: 200, Power kW: 1,8, Speed rpm: 11575,

Manufacturer: IMA, Type: Radiusfräsen, Gear: 2 Motoren tastend oben und Seite, Power kW: 1, Volt/Hz: 133, pm: 11500, Gear: 2 Motoren tastend oben und Seite,

Manufacturer: Ima Ziehklingenaggregat 3 fach Tastung, Spare part from machine: aus Novimat Maschine, for left machine side: yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: Motorisch,

Manufacturer: IMA, Spare part from machine: Kantenmaschine, Kantenschleifaggregat: Schuhschleifaggregat, Total hight mm: 400, Installation width mm: ca.350, Pneumatically controlled: yes, Axis-controlled: pneumatisch, pneumatisch gesteuert : yes, Sanding belt hight: ca.150, Sanding area (beam): ca .30, Sanding belt width max mm: 150, Sanding belt length max mm: 2100, Work piece hight min-max mm: 100,

Manufacturer: 2 Stück Radienschleiffagregat, Spare part from machine: IMA, Profile sanding unit: 2, Total hight mm: 200, Installation width mm: ca.300 pro Aggregat, Pneumatically controlled: yes, Sanding belt hight: 30, Sanding belt width max mm: ca.30, Sanding belt length max mm: ca.2100, Main engine kW: 2 X 0,55 , Belt clamping pneumatically: yes, radius sanding device: yes,

Manufacturer: Ima Servo Kopieraggragat, Spare part from machine: IMA Novimat, for left machine side: yes, Motor : 2, kW-Leistung : 0,3, Volt/Hz : 50, Drehzahlen U/min : 24000, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: servo Ansteurung,

Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,

Manufacturer: IMA Bohrgetriebe mit einzel abrufbaren Spindeln, Stück Bohrgetriebe : 1, Number of drilling spindles: 7, Grid 32 mm: yes, Befestigungsschrauben: yes, FREE TEXT: 4 horizontale Spindeln/kw Leistung Motor 2,2 kw,

Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001

Manufacturer: IMA Winkelübergabe mit Riemenaushebung, Year: ca 1998, Control: no, Work piece width min-max mm: 900, Working length max mm: 1900, Feeding speed max m/min: 5-30, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, roller diameter mm: 60, Working hight mm: 930 +- 50, Lift out roll system: für Riemen, Engine power kW: 2 X 0,75, Year :ca 1998

Manufacturer: KEB, Type: F 4, Model: 16.F.4.C1G.-4M00/2,2, Serial number: 03451526/0510280, Power Output: 1600 Hz- max, Current (A): 23 KVa,

Manufacturer: IMA, Type: Advantage 8200, Year: 2003, Min-max edge material mm: 0,4-20, Work piece width min-max mm: min. 60, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 4-20, Premilling: yes, Mitre stations: yes, Radius scraper: yes, Flat scraper: yes, Profile sanding top bottom: yes, Weight approx. kg: 4400, Year :2003

Manufacturer: IMA, Spare part from machine: Fräsständer, for left machine side: ca.1995, for right machine side: vertikal und Horizontal verstellbar, Number of motors: pneumatisch aussteuerbar, Motor : ca.3,5 kw/100 Hz,

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995

Manufacturer: Siemens Z Achsmotor IMA Bima 410, Type: Permanentmagnetmotor , Model: 1 FT5064-1AG71-4BB0, Serial number: NoEH063 7112 01 004 VDE 0530,

Manufacturer: IMA, Type: Man.Kantenanleimer HKA, Min-max edge material mm: 0,4-3, Work piece width min-max mm: 100, Min.-max. workpiece length in mm: 100, Edgeband height max mm: 16-45, Min-max feed m/min: 0,7-1,2,

Manufacturer: IMA, Type: Bohrgetriebe, Year: ca.1995, Stück Bohrgetriebe : 1, Number of drilling spindles: 5, Grid: 32, Grid 32 mm: yes, Run on the machine: BIMA, Price per unit Euro: 1500, FREE TEXT: 200 Hz/1 kw, Year :ca.1995

Manufacturer: IMA, Type: BIMA 610 V, Year: 1998, Software: IMAWOP 5.0, Programming station office: IMAWINCAD , Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Pendulum processing: 2 x 1.750, Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Year :1998