omet presses: flexo and rotogravure used for sale

Technical data Max mechanical speed: 190 mpm (630fpm) Max. web width: 370 mm (14"4/8) Flexo Printing repeat range: from 5,5" to 24" Maximum flexo printing width: 360 mm (14"1/8) Maximum die cutting width: 360 mm (14"1/8) Web tension: max. 30 kg Drivers and motors: Emerson - Control Techniques Regulations: "CE" Mark Die cutting repeat range: from 8" to 24" (suggested form 12") Substrate thickness range: min 12 micron (0.5 mil) only PET - max. 250 gr/m² Standard machine voltage: 400 V AC three phase + 50 Hz + Earth - Automatic tension unwinder, for rolls up to 1000 mm(40") diameter,with integrated roll pick up from the floor - Servo driven infeed section,with automatic web tension control - Web guide - DUAL SERVO flexo printing stations with chilled impression cylinder for straight through short web path - Automatic pre-register 360° - Outfeed and rewinding section wi ...

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Number Of Colours: 8 // Printing Width: 820 mm

Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Printing Width: 1250 mm // Web Width: 1300 mm

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

7 color<br><br><br>Still in operation: Yes<br>Available: immediately

Number Of Colours: 8 // Printing Width: 406,4 mm

Number Of Colours: 8 // Printing Width: 430 mm

Printing Width: 1050 mm // Web Width: 1120 mm

8 color size 1270 mm<br><br><br><br>

3-color R23501/15 HOLWEG flexo printing machine model: Colorado age: 1971 available: short dated 3 printing units printing width: max. 100 cm Secare – reel rewinder Available: nach Absprache

Central printing press cylinder Print width 1270 mm Roller width 600-1310 mm Processing 1000 mm Winding 1000 mm

Producer : Windmöller & Hölscher Type : QMS 8510 dismantled and stored Colours : 4 colors, CI With doctor blades Print width : 800 mm Repeats : from 23 – 80 cm There are approx. 300 air sleeves with the machine - size unknown Speed : 150 metres/minute Un-/rewinder : max. 1.000 mm With length slitting Cliché is 2.84 mm thick Find more here - /

A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible.

Manufacturer: Schiavi / BOBST Model: Rigel Year of Manufacture: 2001 Colors: 8 Print possibilities: 4+4 Materials: LDPE, HDPE, BOPP, CPP, PET, ALU, PAPER, BIO Gearless: No Checked up: 2022 by BOBST technicians both mechanic and electric parts Max Speed: 300m/min Fast Sleeve Change: Yes Fast Sleeve Anilox Change: Yes Computer Supervision: Yes Web Width: 1320mm Print Width: 1290mm Min Print Repeat: 430mm Max Print Repeat: 1200mm Unwinder Type: Double Turret Automatic Flying Splice Winder Type: Double Turret Automatic Flying Splice Max Reel Diameter Unwinder: 800mm Max Reel Diameter Winder: 800mm Drying: Thermal Oil Video camera: Yes (FIFE) Corona Treatment: Yes (Cason) for conductive and non-conductive materials Web Guides: In and out (BST) Viscosity Control: Gama (not in use, must be repaired) Inking System: Ceramic Anilox + Chambered Doctor Blades Anilox Sleeves ...

Size: Max: 1.700 x 1.150 mm min: 520 x 600 mm Equipments: Vacuum Feeder Vacuum Dust Cleaner No 4 Flexo-Printing Units Bottom Printing With Ceramic Rolls & Chamber Doctor Blade Side track printing Units Electric Running Register Automatic Stacker Max. Sheet Size 1.700 x 1.150 mm Min. Sheet Size 520 x 600 mm Max. Speed 9.000 Sheets per Hour

Equipment em260 year of manufacture 2001 total - 4 Mio m A 2001 Gallus EM 260 is a narrow-web, modular flexographic printing press designed primarily for label production and packaging. Often branded under the Gallus Arsoma line during that era, these machines are known for their robust construction and ability to handle various substrates, including paper and film. Retrofit of the entire machine control system in 2016 8 x printing units with dual drive, max. printing width 250 mm 3 x punching stations (2 x with adjustable counterpunch cylinders (Spilker Variabase)) Printing cylinders 8x each (1/8"): z=88, z=92, z=96, z=100, z=108, z=116, z=120, z=124, z=132 Additional counterpressure cylinders for thin and thick materials Magnetic cylinders, min. 3x each (various gap dimensions, 1/8"): z=88, z=92, z=96, z=100, z=108, z=116, z=120, z=124, z=132 46 x anilox rollers for all appl ...

em510 , built in 2007 3 x printing units with dual drive, max. printing width 510 mm 3 x punching station (2 x with adjustable counter-punching cylinders (Spilker Variabase)) Cliché cylinders (1/8"): 3 x 88, 3 x 92, 3 x 96, 3 x 100, 3 x 108, 3 x 116, 3 x 120, 3 x 140 Magnetic cylinders (1/8"): 2 x 96, 3 x 100, 3 x 108, 3 x 116, 3 x 120, 4 x 140, 3 x 176, 3 x 184, 2 x 192, 1 x 222 13 anilox rollers (cm3): 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30 2 x new anilox rollers 3 x sleeve holders z=88 for coating (with assembly station) Screen printing unit Laminating station 2 x grid winders on rails (up and down) 3 x Uviterno UV system (240 W/cm) 2 x NIR drying modules for aqueous systems (Lambda technology) Corona system 2Kw (SIT) Web edge control: E&L (2 x ultrasonic sensors, 1 x line sensor) Video: E&L Elscan Outfeed conveyor for individual labels Doub ...

Manufacturer: Comiflex Model: Vale 1208 Year of Manufacture: 2011 Machine Type : 8-Colour Gearless Flexographic Printing Machine Number of colours: 8 Condition: Immaculate, manufacturer-serviced only, full service history available Print Specifications - Material width: 1280 mm - Print width: 1200 mm - Minimum repeat length: 380 mm - Maximum repeat length: 840 mm - Machine speed: 300 m/min Anilox Rolls (8 included) - Face length: 1260 mm - Engrave length: 1240 mm - Outside diameter (OD): 171.88 mm - Inside diameter (ID): 149.722 mm Sleeves (8 included) - Inside diameter (ID): 114.708 mm - Face length: 1210 mm Ink and Registration Systems - Ink pump: Phonematic with autowash system - Camera and registration system: FIFE Find more here - / Contact us at -

Manufacturer: Carint Year of Manufacture: 2000 Machine Type : 6-Colour Central Impression Flexo Printing Machine Print Specifications - Substrates: PE, PP, OPP, PET, Paper - Printing width: 1250 mm - Material width: 1280 mm - Minimum print repeat: 360 mm - Maximum print repeat: 1040 mm - Mechanical speed: up to 300 m/min Unwinder and Winder - Unwinder type: Turret, non-stop - Maximum roll diameter: 800 mm - Shaft size: 3 inch expanding shafts - Winder type: Turret, non-stop - Maximum roll diameter: 800 mm - Shaft size: 3 inch expanding shafts Ink and Drying System - Ink pumps: 6 pneumatic pumps - Doctor blade system: chamber type doctor blades - Drying system: electrical Accessories and Equipment Included - Motorised longitudinal register - Anilox cylinders: 8 pieces - Cliche holder cylinders: 6 pieces - Video inspection system - Web guides - Banana rolls - Cliche holder hoist  ...

Hot press Adkins OM 1000 Government machine Baujar 2015

various book presses, in good condition, immediately available

Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing

Book press Tränklein ZP 39 Combi; cleaned and tested; Format per press plate 322x440mm; Insertion height 400mm; Pressing force 5t. Book press Tränklein ZP 39 Combi; cleaned and checked; size per pressing plate 320x440mm; hight 400mm; press capacity 5t.

blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.

Manufacturer: Bobst Model: Flexo 200 Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO-TECHNIK; steam pressure reduction station from Helmut Herbert GmbH The running speed of the system is approximately 4,000 sheets per hour. Spare parts: ST= pieces Bezeichnung Lief.Artikelnr. Bestand BasisME Freilauf FK 24 AP BSA1101010400 2 ST Freilauf FB 44 SF BSA1101047600 2 ST Rutschnabe kplt. M. Kettenrad 16H7 Z20 RN 250M-1/KR 2 ST Reibscheibe RN 250/RS RN 250/RS 8 ST Tell ...

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

; operational

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

in 2005 refurbished Still in operation: Yes Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

<br>8 stations 7 investors P 15 Bulletin station Trimmer Trimmer HT 15 Stacker RS 10<br><br>Still in operation: No.<br>Available: immediately

Anilox - cylinders and plates washer

<br>Collective chain &amp; investors 1 station hand feeding 6 Stehendbogenanleger Double and false sheet control Bulletin station 2 Heftk pfe Hohner Large of roller cleaning for 4 wire wheels 1 Three knife trimmer Media cutting device Band display<br><br>Still in operation: No.<br>Available: immediately

<br>7 stations chain 6 investors P 15 1 folding feeder FF 100 Bulletin station 2 Heftk pfe Hohner Three knife trimmer Band display<br><br>Still in operation: No.<br>Available: immediately

in 2005 general overhauled Still in operation: Yes Available: sofort

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

<br>Gathering machine Clamping element with manual installation 20 stations TO 803 20 Controls Wrong &amp; double sheet control Intermediate modules Installation element Hand system Adhesive Binder 20 pliers Vibration station Peace table Folding Anpre station S-FR and roughened station Popular B Hotmelt R ckenleimwerk Squeegee control Hotmelt side glue works Premelter Gauze station Scales cover feeder Groove Station 2 to 6 times Handling pressure Niederlegevorrichtung<br><br>Still in operation: No.<br>Available: immediately

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

Turning- and Distibution Built in: 2000; working condition

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S

Bag width up to 20 cm, Bag length up to 32 cm, machine in production

Machine in running, tail end printer could be added

Indentation unit for SM 74, 520 x 740 mm.

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

range L-W-H: 390 x 270 x 760 mm corner cutter: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 102 x 142 cm dimensions of press (L x W x H): 250x190x220 cm weight: 250 kg serial no.: M-0514-005-05/05-08 frequency: 50 Hz voltage: 400 V palletising unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cito System for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. moulding area: 38 x 50 cm electrics - voltage/frequency: 230 V/Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flat and satchel bag machine Matador 20, Windmoeller & Hoelscher, Tube width 9-20 cm, Tube length 10-32 cm, machine ready for test production

Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour 4xHohner 48/5 stitching heads Easy adjustment option for head stitching Break-in sword fold with adjustable folding rollers Front cutting unit via upper and lower knives

5-Farben Etikettendruck- und Endlosdruckmaschine - 5-Color Label- and Business Form Printing Machine Edelmann Junior Print DR2450 Baujahr / Year 1995 - Serial-No. 1.228/8 Size 8 1/3" Druckformat / Printing Size max. 207.5 x 360mm Geschwindigkeit / Speed max. 40.000rev/h Papierbreite / Paper width 150-370mm Rollendiameter / Reel diameter 1000mm Diameter Kern / Core 70mm Papiergrammatur / Paper weight 30-160gr7sqm Schnittlänge / Cutting length 423.3 or 211.6mm Rolle zu Bogen / Roll to Sheet Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdeckenmaschine - Bucheinhängemaschine - Case maker - Crease and Presser Horizon HCM-1/ HCP-1 Year 2009 - HCM-1/HCP-1 Serial-No. 312002 Book Block size min. 133.7x136.7mm, max. 297 x 215,9mm Cover Material min. 169.7x322x4mm, max. 333x502.8mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Perforier- und Nutmaschine - Perforation and Creasing machine TORINO PD-1/B Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Manuals for Heidelberg Quickmaster 46- one and two color: Spare part book -multilingual and instruction manual in German. In very nice condition, no pages missing. Can ship worldwide.