panhans saws wood used for sale

Panel sizing saw 4.200x4.200mm Very good technical condition! PC control up to date. incl. optimization software (office version) More information on request. The machine is available immediately! Viewing and demonstration at short notice by appointment!

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 700 mm Cutting height: 420 mm cutting width: 680 mm Motor output: 3 kW Table dimensions: 695 x 990 mm Table tiltable: 45 Grad Dimensions (L/W/H): 1260x840x2270 mm machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 570 mm Motor output: 2,2 kW Table dimensions: 810 x 590 mm table height: 905 mm voltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mm Weight: 275 kg Dust suction hood: 2 x 100 mm band speed: 1550 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 410 mm Length of the planing table: 2850 mm Number of knives: 4 (Tersa) St. Motor output: 5,5 kW loading dimensions L x W x H: 2950 x 1260 mm weight: 870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Working width: 630 mm Working height: 3 - 250 mm Motor output: 7,5 kW Feed speed: 7 und 14 m/min. Dimensions (length / width): 2700 x 1700 mm weight: ca. 1.450 kg Dust suction hood: 2 x 160 mm COMBINED PLANNING AND THICKNESSING MACHINE 546|100 Manufacturer description Solid German mechanical engineering Convenient planing and thicknessing without machine conversion, dimensionally stable and precise dressing tables, as there is a folding up omitted, for planing widths up to 630 mm and dual operation up to 315 mm each PANHANS solid steel cutter block with 4 Tersa reversible knives SURFACE PLANE: Table length 2555 mm, planed with toothed table lips Electromotive adjustment of the feed table via button with digital display the chip removal max. 5 mm Dressing fence can be inclined up to 45°, in an extremely smooth-running steel guide stored Dressing ruler, anodised, with swiveling auxiliary  ...

Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ( ...

Swivel spindle milling machine Brand: Panhans type 245 10 New machine Technical data: Engine power: 5.5 kW / 7.5 hp table size: 1100 x 760 mm table height: 870 mm clamping height: 140 mm height adjustment: 140 mm speed: 3000 / 4500 / 6000 / 9000 rpm space requirement: 1145 x 1180 mm Net weight: approx. 800 Table milling machine with double-sided swiveling fixed milling spindle for the swiveling range from -5° to +45,5°. handwheel adjustment with analog dial gauges Belt quick tensioning device Electr. speed indicator Left and right rotation cutter quick clamping device fine planed cast iron table with rigid frame support Milling stop 215 total adjustment via handwheel incl. multiplex stop plates mechanical motor brake milling protection and pressure device GAMMA V 1629 curved milling fence 1639 Tapoa

Spindle milling machine, swiveable Brand: Panhans Type: 245/20 New machine Technical specifications: - Table size 1100 x 760 mm - table height 870mm - Milling spindle 30 mm, not exchangeable - Clamping height 140mm - Height adjustment 125mm - Extraction nozzle 2 x Ø 120mm - 4 speeds 3000/4500/6000/9000 rpm. - Weight approx. 800 kg - Motor power 5.5 kW / 7.5 PS - voltage 400V / 50Hz - Space requirement 1200 x 1400mm Solid German mechanical engineering Table milling machine with double-sided swiveling permanently installed milling spindle for a swivel range from -5 ° to + 45.5 ° Positioning control for height and swivel adjustment with zeroing of the height and offset Electronic position and speed indicators Quick release belt device Push button for spindle start and stop Left and right rotation Quick clamping device for milling cutters Finely planed gray c ...

Planer Brand: Panhans Type: 335/20 New machine Technical data: - Planing width 510mm - Feed table length 1620mm - Delivery table length 1170mm - Total table length 2850mm - Blade shaft speed 5000 rpm. - Extraction nozzle Ø 160mm - Chip removal up to 8mm - Weight approx. 1,050 kg Motor power 5.5kW / 7.5PS Voltage 400V / 50 Hz Required space approx. 2900 x 1500mm Solid German mechanical engineering For dressing and joining, including hollow and pointed joint setting for planing widths up to 510 mm and max. Chip removal up to 8 mm Ergonomic working position directly on the blade shaft PANHANS solid steel blade shaft ø 125 mm with 4 pieces of Tersa reversible blade Finely planed machine tables, total table length 2850 mm Control panel above at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow or pointed joint),  ...

Thicknesser Brand: Panhans Type: 436/100 New machine TECHNICAL SPECIFICATIONS Planing width 630 mm Planing height 3 - 300 mm Chip removal max. 8 mm Thicknesser table length 1100 mm Blade shaft speed 5000 rpm Motor power feed 0.55 kW / 0.8 PS / 0.75 kW / 1.0 PS Extraction nozzle Ø 160 mm can be used on the left or right Feed speed 7 + 14 m / min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German mechanical engineering For thickness planing for planing widths up to 630 mm and planing heights from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel knife shaft Ø 125 mm with 4 pieces of Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and safe workpiece feeding With sectional pressu ...

! Exhibition Machine Corresponds to the Panhans LLB116 with the following optional accessories: - Single-lever operation with fine locking - Dial gauge in the handwheel for height adjustment SPECIFICATIONS: - Max. drilling depth 145 mm - Max. elongated hole length 240 mm - Height adjustment 135 mm - Motor power 1.3/1.7 kW - Suction nozzle Ø 100 mm - Machine weight 200 kg

Key data: 2 mm, 8 kW, 40 mm

Panhans 245 Easy Swivel Spindle Milling Machine Brand: Panhans Type: T26 CNC M-No.: 245 Easy Year of Make: 2008 Control: 2-axis electric control, spindle height and inclination, 2-fold handwheel adjustment with digital readout stops together and right stop in offset Control panel: Eye level, Rotatable Motor power: 7.5 kW Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm with SK40 and mandrel fix quick coupler Height adjustment milling spindle: Electric height adjustment with fast and creep gear Adjustment range 150 mm Electro-pneumatic milling spindle locking mechanism Central lubrication with long-lasting grease Speed: Frequency controlled, with digital display, automatic brake, central lubrication Spindle holder: Mandrel snelwisselsysteem (pneumatic locking) Table size: Table widening on both sides, 2405mm with extendable support front Axis  ...

Key data: 630 mm, 8 mm, 8 kW

Panhans 446-B Dressing-Thickness Planer Combi Machine Brand: Panhans Type: 446B Year of Make: 2005 Planing width dressing/thickness planer: 630mm Knife shaft: ø120 - Z-4 Speed: 5,000 rpm Engine: 7.5 kW Planing height: 4- 225 mm Table length dressers: 2,250 mm Table length thicknesses: 1,040 mm Extra Uitvoer taflelengte: 1.000 mm, automatische hoogte versetlling met tafelblad Chip removal: max. 8 mm Feed: 7 + 14 m/min. Weight: 1,300 KG Extraction ø160 mm Condition: Fully functional tested

Thickness planer PANHANS type 425 510mm is optically and technically in very good condition, the machine comes from an assembly company and has been used only a little, everything is in its original condition, nothing has been repainted, the machine has only been cleaned everything works perfectly with non-return protection the planer blades can be adjusted very easily and very precisely, there are adjustment gauges that can be screwed onto the knife shaft, which ensures the highest precision the chips can be discharged very well through the closed system with 4-knife shaft for normal strip planer knives The thickness table is mounted on 2 trapezoidal spindles to prevent tipping and torsion. with protective cover that can be opened upwards max. planing width 510mm, max. planing height 250mm the machine will be delivered and demonstrated by us personally throughout Germany for ...

Key data: 510 mm, 250 mm, 5 kW

PANHANS 425 YOC 1993 Motor power: 5.5 kW  Rated current: 14.7 A Max. planing width: 510 mm Max. planing height: 250 mm 4-Knife Shaft Strip Planer Knife 2 feed speeds: 7 + 14 m/min. Height adjustment electrically (fine adjustment by handwheel) Altitude display via mech. Counter Link feed roller Articulated pressure beams Rubber pull-out roller (in good condition) 2 table sliding rollers Extraction connection: 160 mm incl. 2nd set of br. Planer Knife  incl. adjustment gauge Transport dimensions: WxDxH: 114 x 110.5 x 111 cm Weight: approx. 650 kg

This PANHANS POLYPAN 47 F panel saw was manufactured in 2007. It features a cutting length and width of 4200 mm, main saw blade diameter of 350 mm, and a main saw motor power of 11 kW. The saw carriage offers variable feed speeds up to 80 m/min. Ideal for precise, large-scale panel dividing. Contact us for more information about this machine.

Key data: 630 mm, 250 mm, 7 kW

PANHANS 426 YOC 1991 Motor power: 7.5 kW  Rated current: 18.2 A Max. planing width: 630 mm Max. planing height: 250 mm 4-Knife Shaft Strip Planer Knife 2 feed speeds: 7 + 14 m/min. Height adjustment electrically (fine adjustment by handwheel) Altitude display via mech. Counter Link feed roller Articulated pressure beams Rubber pull-out roller  2 table sliding rollers Extraction connection: 160 mm incl. adjustment gauge incl. 2 sets of brewing Planer knife (one of them sharpened) Transport dimensions: WxDxH: 126 x 110.5 x 111 cm Weight: approx. 900 kg

Table dimensions: 2.600 x 800 mm Motor output: 11 kW Spindle diameter: 30 mm reus: 3000/4500/6000/9000 U/min Weight: 780 kg : Ja : Ja : Elektrisch : Elektrisch : -5° bis +45° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel saw manufactured in 1994. This PANHANS 693 / EURO 30 features a cutting length of 5800 mm and a cutting width of 5150 mm. It includes a rear support table and multiple support beams for enhanced stability. If you are looking to get high-quality cutting capabilities, consider the PANHANS 693 / EURO 30 machine we have for sale. Contact us for further details.

Panel saw manufactured in 2001. This PANHANS EURO 32 features a cutting length of 5800 mm, a cutting width of 2x2200 mm, and a maximum cutting height of 100 mm. It includes a hydraulic lifting table with roller conveyor and an automatic angle cutting device. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS EURO 32 machine we have for sale. Contact us for further details.

Slotted Hole Drilling Machine Panhans Type 116 Year of manufacture 1997 With dowel device Two-jaw drill chuck 1-20 mm Table fixed, drilling support movable 1 eccentric clamp on the table Table size 700 mm x 380 mm Maximum drilling depth 145 mm Maximum elongated hole length 240 mm Height travel 135 mm Motor power 1.5 kW Speed 3000 rpm. Weight approx. 200 kg

Panhans 426 thickness planer Planing width 630 mm Planing height 250 mm Electric height adjustment via positioning control TERSA Safety Planer Shaft Table led four times Main motor 7.5 KW Feed rate 7 + 14 m/min. Link pressure beams made of solid aluminium material Machine is WORKSHOP TESTED in VERY GOOD CONDITION from stock Lieboch  

CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details.

Spindle moulder manufactured in 2013. This PANHANS 245 features a robust table size of 1100 × 760 mm and a spindle height adjustment of 125 mm. It operates at spindle speeds of 3000, 4500, 6000, and 9000 rpm, making it suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the PANHANS 245 spindle moulder we have for sale. Contact us for further details.

Carriage length: 3200 mm; Cutting width at the width stop: 1300 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 150mm; Vorritzer: yes; Swivel range saw blade: +45Â ; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: electric; Display Saw Blade Angle: Digital Display; Display Cutting Height: Digital Display; Display Width Stroke: Digital Display; Display cutting ruler: Scala; Scoring adjustment: electric; Saw blade diameter: 450mm; Speeds: 4; Motor power: 5.5kW; Suction port: 80

Spindle swivel: No; Height adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: Scala; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000, speed display defective; Motor power: 5 / 6 kW; Engine brake: Yes, manual; Suction port: 120mm; Machine length: 2500mm; Machine depth: 900mm; Weight: 800kg; Powerful design in all details.High cutting performance, lifelong durability

working width: 510 mm; cutter head: Strip - Knive; number of blades: 4; surface table length: 2200 mm; fence adjustment: ja; maximum workpiece thickness: 220 mm; height adjustment thickness table: elektrisch; read out for thickness table: Scala; feed speed: 7 / 14m/min; infeed roller: steel; outfeed roller: steel; table roller: ja; motor power: 5,5 kW; motorbrake: ja, automatisch; suction connection: 160mm; machine length: 2200 mm; machine width: 1050 mm; weight: 1050;

Working width: 630 mm; Planing shaft: strip knife; Number of knives: 4; dressing table length: 2200 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: manual; maximum clearance thickness planer: 220 mm; Height adjustment thickness table: electric; Indication of planing thickness: Scala; Feed speed: 7/14m/min; Feed roller: steel; Pull-out roller: rubber; Pressure bar: articulated; Table rollers: yes; Motor power: 7.5 kW; Engine brake: yes, automatic; Suction port: 160mm; Machine length: 2200 mm; Machine width: 1150 mm; Weight: 1250;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Hold-down: manual; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;

Milling fence adjustment: via handwheel; Milling stop Gauge: Siko meter; Milling jaw adjustment: handwheel; Milling jaw gauge: Siko counter;

Swivel spindle milling machine Brand: Panhans type: 245/200 New machine Solid 880 kg machine with smart control system - Infinitely variable speed regulation 1500 - 10,000 rpm, - 7.5 kW motor with 11 kW frequency converter - Pushbutton with electronic soft start 7 touch control, optional use, top and bottom - Cutter zero point selectable in program, 3 reference points - Simple operating menu through innovative touch control (max. 2 levels) - Operating hours counter - Warning messages in case of operating errors - Remote maintenance via Internet (VPN tunnel) - USB interface for data backup and import of tools, programs and users - Tool database for 5 tools (20 programs are possible per tool) - 2-axis positioning control for height and swivel adjustment - Electronic position and speed displays Double-sided swiveling, fixed milling spindle for the swiveling range  ...

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Sliding table saw Brand: Panhans Type: 680 100 New machine Technical data: Trolley length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90 ° 105 mm at 46 ° Cut width Width stop 1030 mm Saw blade max. Ø 450 mm Saw blade under table retractable Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus. 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000/4000/5000/6000 rpm Net weight approx. 1051 kg Technical description: Solid German mechanical engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body manufactured as a stable frame welded construction from thick-walled steel profiles, laser-processed sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is built on the  ...

Key data: 2 KW, 40 mm

gebr. Spigot cutting and slitting machine with lifting spindle PANHANS TYPE 261H YOC 1993 Manual / automatic operation Lifting spindle autom. Changing the splintered wood Longitudinal stop LAS (HOFFMANN) Pneumatic workpiece clamping Sliding carriage length: 2.50 m Shortcut saw: Motor power: 2.5 kW Max. saw blade diameter: 400 mm max. cutting height: 130 mm Lateral adjustment: max. 100 mm Suction nozzle: 80 mm Milling machine: Motor power: 7.5 kW Milling mandrel: 40 mm Max. tool diameter: 350 mm Suction nozzle: 200 mm Largest tenon length: 140 mm Clamping height: 235 mm Lifting height: 120 mm Rolling table height adjustment: 80 mm Engine brake All pneumatic hoses renewed Weight: approx. 680 kg Manufacturer information

Wheel diameter: 600 mm Cutting height: 395 mm cutting width: 585 mm Motor output: 2,2 kW Table dimensions: 910 mm Table tiltable: Grad Dimensions (L/W/H): mm machine weight ab.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PANHANS 116 YOC 1986 Motor power: 1.5 kW 2-lever operation Max. drilling depth: 130 mm Height adjustment: 135 mm Max. slotted hole length: 240 mm Height adjustment by handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Workpiece stop 1 eccentr. Workpiece clamp Line laser (Z-laser) 230V Chassis Table size: 510 x 290 mm Weight: 220 kg incl. various Gebr. Drills Dimensions (approx. dimensions): W: 90 cm T: 125 cm H: 115 cm Manufacturer information

Bos Machine (BMH) with a Sapiens Wood bosmachines We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: ...

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg

Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw blade diameter 550mm Pneumatic material clamping Pneumatic saw passage Saw control with two buttons 7.5kw main motor 2x roller tables length 160cm each CE Certified White Paper

Used, in very good fully functional condition from company closure. Esterer gang saw with many spare parts and at least 40 new and used saw blades. The gate is in good, ready-to-use condition with minimal bearing clearance of 2-3mm incl.: Braun WE158 quick-release carriage, splitting wedge, timber transfer station Heavy-duty roller trestles and various accessories (can be viewed on site) Frame width: 710 mm Passage height: 710 mm Stroke: 500 mm

Sawblade tiltable: . ° cutting width: . mm Motor output: . kW The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

SCM SI12 TW saw-mill Trolley length 1500mm Undercut Up/Down Spindle Adjustment Up/down dial adjustment Blade angle adjustment up to 45 degrees Cutting width on the right side 1450mm Maximum blade diameter 300mm Milling machine spindle diameter 35mm Spindle speed 3000/4500/6000/8000/10000 r.p.m Saw Speed 4000 rpm 4kw milling machine motor 4kw saw motor Net price 15.000PLN

Band saw Hammer 4400, very good condition, 1.5 kW, approx. 110 kgPrices subject to change, errors, printing and typesetting errors excepted

Band saw Felder FB510, year 2019, very good condition, standard equipmentPrices subject to change, errors, printing and typesetting errors excepted

Band saw Metabo BS260 Swift, year 2006, very good condition, 260 watts, 230 V, 1712 mm belt length, 40 kgPrices subject to change, errors, printing and typesetting errors excepted

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F

Wood Turning Lathe big turning diameter over bed allows the turning of workpieces with large diameter - ideal for turning E.g. plate user friendly adjustable speed Digital speed display comfortable working with hand pad and quick adjustment Spindle/tailstock bore 10 mm Top width: 457 mm Tip height over machine bed: 153 mm 3-stage variable spindle speed: 650-1450 min-1, 1250-2800 min-1, 1600-3800 min-1 Headstock, thread: M33 DIN800 Motor power S1 (100%) / S6: 550W / 770W Mains voltage: 230V Net weight: 33kg G & HM-D460FXL

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 044927 TT 321-2 302R 171.6-905 E23 -Outer milling cutter: Ø 172 mm -Height: 30 mm -Hole: Ø 40 mm -Bolt circle: Ø 60 x 8 mm -Weight: 1.7 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: Ø 150 mm -Height: 20 mm -Hole: Ø 30 mm -Quantity: 1 milling cutter -Dimensions: 150/150/H20 mm -Weight: 2.2 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 138 mm -Height: 25 mm -Socket: Ø 30 mm -Number: 1 cutter -Screwed saw blade: 140 x 4 mm -Price: complete -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -External milling cutter: Ø 180 mm -Height: 14 mm -Socket: Ø 35 mm -Radius -1x: right -1x: left -Price: complete -Weight: 9.1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 302 mm -Height: 12 mm adjustable -Disk milling cutter -Socket: Ø 60 mm -Number: 2x milling cutters available -Price: per piece -Weight: 14.8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 80 mm -Height: 20 mm -R angle -Support: Ø mm -Number: 2x milling cutters available -Price: per piece -Weight: 0.5 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg

Type Overture ES Voltage 230 V (50 Hz) Made in USA Transport dimensions 600x400x500 mm Weight 15 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm -Socket: Ø 30 mm -Weight: 5.8 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer dimensions: Ø 180x40x35 mm -Cutter: 1 -Price/Sale: complete -Weight: 6 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO -Type: Ø 212x40x60 20° -Outer: Ø 212 mm -Angle: 20° -Socket: Ø 60 mm -Hole circle: 100 mm -Number: 2x milling cutters available -Price: per piece -Weight: 8 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -AKE wood router bit with: AKE Hydro-Grip -Outer diameter: 165 mm -Height: 60 mm -Hole: Ø 40 mm -Cutter: 1 -Price/Sale: complete -Weight: 8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: with ETP Hydro-Grip -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm -Number: 2x milling cutters available -Price: per piece -Weight: 10 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Socket: Ø 60 mm -Number: 1 cutter -Price: complete -Weight: 5.5 kg

wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: Ø 160 mm -Hole: Ø 60 mm, bolt circle Ø 85 x 9 mm -Number: 2x cutters available -Price: per piece -Dimensions: Ø 160 x 40 mm -Weight: 3.6 kg/piece

Laser sensor Error detection automatically Shape recognition Laser printer (DIN A4) Number 2 Monochrome cameras PHOTONFOCUS 160 MB Number 2 Barriers + Accessories