presstek pre press: imagesetter and CTP used for sale

Presstek Dimension Exel with external Affinity chilling unit, AMS -air management system, Dell Dimension computer, serial tools, connecting cables and some repro materials. Very clean and maintained. Available immediately.

Manufacturer: Presstek Model: 34DI Year of Manufacture: 2006 Type of Machine : Digital Offset Printing Press Total length: 320 cm Max. print format: 450 mm Max. sheet size: 460 mm Production speed: 7,000 sheets/hour Total impressions: approx. 4.2 million Installation area: 350 × 300 cm Includes inks and maintenance materials Complete maintenance performed in 07/2022, including full disassembly, cleaning, and reassembly Find more here - / Contact us at -

direct imaging very good condition in western europe, Print numbers: 11mio, Format: 37 x 52

-Year 2009, approx 17 mil. copies -Offset digital press -Autoplate, table control -Maximum Print Speed 7,000 sheets per hour -Sheet Thickness 0.0024” – 0.02” (0.06 – 0.5mm) -Maximum Sheet Size 13.39” x18.11” (340 x 460 mm) -Minimum Sheet Size 3.54” x 3.94” (90 x 100 mm) -Image Resolution 2540 dots/in (100 dots/mm) -Imaging Time 4.5 minutes -Automated Changeover 10 minutes -Ink Zones & Ink Rollers per Unit 11 ink zones / 15 ink rollers -Form Rollers per Unit 4 -Feeder Universal -Feeder & Delivery Pile Capacity 15.75” (400mm) -Full and complete, available immediately

max. plate size: 680 x 780 mm min. plate size: 240 x 240 mm max. speed plates: 20 /h incl. RIP chemical free The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grafoteam PST 26/780 plate stacker; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26/780; good condition; cleaned and checked; new arm motor; max.plate size 820x780mm, min.324x394mm.

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

Flexo Laser FL- Piccolo (Xeikon) – flexo CTP year 2008 fiber laser 20W – 1.25 plates/h approx. 3,000 m2 exposed rotating external drum vacuum Digital Exposable Photopolymer Flexo Plates all thickness, all brands exposable size 635 x 762 mm Resolution 2540 dpi data format separated 1 bit tiff weight 500 kg good condition

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

Polimero A4 imager washer-dryer; good condition; cleaned and tested; Format 320x220mm; washout with magnetic plate; exposers; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Film imagesetter Linotronic 630 Post Script RIP 50 exposure format: 483x450mm (19x17.7inch) without register option 483x428mm (19x16.9inch) with register option Material width film: 280,310,340,370,400,430,460 mm Min. width and length not specified Dimensions (W x H x D) 820 x 890 x 960 mm (32.2 x 35 x 37.8 inch)

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

original Kodak laser head lift for TH3

max. plate format 1130 x 950 mm 64 Laser Diodes 405nm Resolution 2400 dpi Platecounter 31260 Laser on time 940 hours only well-maintained available immediately delivery worldwide, Price on request

External RIP and Developer

Advantage N-SL 2010 CTP plate setter Advantage N-SL+ Plate developing machine VPP 68 +Nela fully automatic plate punching machine with video cont Find more here - / Contact us at -

CTP HEIDELBERG SUPRASETTER A 52/ A 75 ATL -Year 2009 Thermal CTP -Laser Type: Laserhead (64 diodes, 160 mW, 2540 dpi ) Gen II -Approx 78.000 plates, 3.600 hours of work -Min. Plate size: 240x240 mm -Max. Plate size: 676x760 mm -Speed: up to 17/22 plates/hour -Manual plate loading -Internal plate punch Bacher system with 2 positions -Autoloader - ATL two plate storage cassettes ( max capacity of 50 plates in A1 size ) -Automatic paper separation from plate to plate -Heidelberg Prinect Metashooter included, computer and monitor -Always under Heidelberg Italy maintenance -Available in June, in very nice conditions

BasysPrint 855 (Online System) Built 01/ 2010 2-Laser Head UV,405nm Exposed Plates 85600 Max:Plate Size 920 mm x 1,080 mm Min: Plate Size 323 mm x 450 mm Cassettes Manager 1 Cassettes With Kodak Merxury 85 PlateProcessor Server PC, 20 TFT Monitor.

Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.

Machine complete with PC, RIP, etc.

-Model : Thermal platesetter KODAK CREO LOTEM 800 II QUANTUM S YEAR 2009 -Totally refurbished from Kodak in 2013 -Software version 3.82.12 -Autoloader with 1 cassette of 50 plates capacity , Internal punching system -Approx 13.000 plates done , speed 19 plates per/hour -Included : RIP Creo Prinergy installed with 2 computers and monitors -Stacker Egraftech year 2013 -Plate size: max 1130x900 mms. -Resolution: up to 2540 dpi -Available immediately , complete with all accessories, in good conditions

-Thermal CTP Year 2006 -32 diodes -Plate Count: Approx 36.000 plates done -Exposure Time: 3.600 hours -Screen Autoloader plus unit with 4 cassettes -Internal plate punch system -Blower Unit External Screen BU 800 -Plate processor on line General Graphic with bridge connection -Plate stacker Atag -Min Plate Size: 450 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400/2438/2540 dpi -Productivity: Up to 18/20 plates/ph at 2400 dpi (dependent on plate type and size) -Included RIP Harlequin, computer and monitor -Available immediately

16 diodes

Agfa CTP with developer format 103x77, 64 diods, year 2008

- MCU Magnus 400 II Platesetter (3 cassettes) - ca. 62.000 plate exposures - suitable for GTO / SM 52 / SM 74 plates - for processless plates - Inline punch Bacher 425 mm - Plate Stacker ADVANT PST 26 - Shooter - without RIP

Ser. No.: PJ000400 // Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

max. plate size: 625 x 550 mm max. speed plates: 30 /h resolution of impression: max. 2540 dpi Violet Laser incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ser. No.: 023910293 // Speed: 20 plates /h Counter: 69'068 plates Format (cm): 50x70 Equipment / Additional information: With Server, Trueflow Software with integrated plate punch with 40 laser diodes (individually replaceable) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

max. plate size: 824 x 1143mm mm min. plate size: 228 x 252mm mm max. speed plates: 15 /h incl. Rip incl. Compressor inkl. Glunz & Jensen MP 85 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

min. plate size: 240 x 240 mm max. plate size: 676 x 530 mm max. exposure format: 656 x 530 mm Plate thickness: 0,15 - 0,3 mm - Hand feed - without bridge - Developing machine - Stacker

Max. plate size: 676 x 530 mm Plate thickness: 0,15 - 0,3 mm - Hand feed - Bridge - Developer unit - advant PST 26 compact Stacker - incl. Shooter - incl. RIP

Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced

All Rip and Software Included, 2400 dpi, Formats: Min. 324x660mm, Max. 370x830mm, PST 26 Compact Stacking Delivery, 16 Diods Laserhead, Infrarot 830nm thermal, chemical free thermal CTP with Autofeeding

Max. plate size: 676 x 530 mm Plate thickness: 0,15 - 0,3 mm - Hand feed - Bridge - Developer unit - Workstation

Resolution: 2400 dpi Manual plate feed line Speed 21 pl/hr. Max. plate size max. 838 x 990 mm mm plate size min. 267 x 215 mm mm

Maximum plate format 1422 x 1804 mm, incl. Automatic Pallet Loader APL 1 segment, inline punch, online processor Glunz & Jensen 165 HDX Immediately available, price ex location on request, delivery worldwide

(processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Ser. No.: PJ000016 // Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, exte ...

CTP Computer-to-Plate Imagesetter For Thermal Plates 830nm, 2xLaser Heads, Solution: 2400, 2540 dpi, Format: Max. 790x1030mm, Min. 370x323mm, Plate Thickness: 0.15-0.35mm, Speed: 23 Plates/Hour

Screen PTR 8600 E Built: 2010 Included one XMF for TIFF with PC. Developer G&J 125 – ZAC Available immediately.

Agfa Avalon N4-30 PT-R4600E, Year 2018 only approx.16K plates done Apogee Workflow RIP Inline punch Stacker ST 95EX Azura C95 Clean out unit Etc. Available: at short term

Size: 830 x 660 mm Technical details: Max. size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipments: 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Punching device Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures.

AGFA Acento E (Screen 4100 E) year 2006 16 diodes plate winding cycles 66.600 exposure time 5,800 h PC with ApogeeX good condition