rachner post press: cutters and guillotines used for sale

Rachner R 800 PA/RS; workshop overhauled; new vibrating motor; new hydraulic lines; Ventilation; Shaking elfinction; Side ruler; Format 600x900mm; Load capacity 800kg; Delivery time approx. 6 weeks. Pile turner Rachner R 800 PA/RS; The new jogging motor; new hydraulic hoses; airing; jogging; adjustable aligning gauge; size 600x900mm; carrying power 800kg; delivery time 6 weeks.

pile turner Rachner RD 800 P; condition outdated; Format 600x900; Load capacity 800kg; new tilting cylinder; upper cylinder overhauled; pump and tank cleaned; new tilt valve. Pile turner Rachner RD 800 P; condition rebuilt; size 600x900mm; lifting capacity 800kg; new turning cylinder; upper cylinder rebuilt; pump and tank cleaned; new turning valve.

Pile turner Rachner RD 1000 P; cleaned and tested; Platform size 128x80cm; Load capacity 1000kg; Opening width max.1400mm. Pile turner Rachner RD 1000 P; cleaned and checked; platform size 128x80cm; lifting capacity 1000kg; max.openig width 1400mm.

Rachner Pile Turner F 1800 PA / R+S Completely overhauled, large opening width, 1800 mm Platform size 800 x 1270 mm with pile ventilation and vibrator. Technical condition almost as good as new after overhaul. ( 2024 ) Inspection and testing are possible at any time.

Pile turner Rachner F 1800 PA/RS; Condition obsolete; Platform size 800x1270mm; Opening width 1800mm; Vibration function; Blowing air with extra large blower 7.5KW; Side ruler; Load capacity 1000kg. Pile turner Rachner F 1800 PA/RS; condition rebuilt; size 800x1270mm; max.pile hight 1800mm; jogging; airing with big blower 7,5KW; adjustable aligning gauge; carrying power 1000kg.

Load capacity: 1000 kg max. opening: 1300 mm min. opening: 500 mm

Pile lifter Rachner RSL 50-A; Condition unused; Platform size 890x630mm; Load capacity 650KG; Automatic mode with light barrier. Pile lift Rachner RSL 50-A; condition never used; size 890x630mm; lifitng capacity 650 kg; autimatic mode with light bar.

Turning module/pile turner Rachner STM 150; Condition unused; Format 530x430mm; Load capacity 150kg; Max. Stacking height 800mm, min.320mm. Turn modul/pile turner Rachner STM 150; condition never used; size 530x430mm; lifting capacity 150kg; max.pile hight 800mm, min.320mm.

Pile turner with - blower - jogger Load capacity: 800 kg Plattform internal sizes: 900 x 600 mm Sheet size: 860 x 600 mm max. opening: 1330 mm min. opening: 450 mm

Ersatzmesser für Schneidmaschinen - Spare Knife for Guillotines Polar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Main Unit: Wohlenberg 185 Guillotine Cutter Manufacturer: Wohlenberg Model: 185 Year of Manufacture: 2004 Test Piece Diameter: 10 mm Curtain Separation Distance: 400 mm Maximum Stopping Performance: ≤ 318 ms Included Equipment: - Baumann NUP2000 Pile Lifter Manufacturer: Model: NUP2000 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 20,000 N - Power Consumption: 3.2 kW - Current Draw: 7.4 A - Circuit Diagram No.: 625.00 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 20,000 N - Power Consumption: 3.2 kW - Current Draw: 7.4 A - Circuit Diagram No.: 625.00 2.Baumann BA7 Stacker Manufacturer: Baumann Model: BA7 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 5,000 N - Power Consumption: 0.6 kW - Current Draw: 1.6 A - Circuit Diagram No.: 592.065D  ...

Manufacturer: Rabolini Model: Imperia Type of Machine : Die–cutting press Find more here - / Contact us at -

Reference Num.: 4274 Brand: BOBST Type: SP 142 CER Construction year: 1995 Available: directly Status: In production Location: Deutschland

HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

Control Board A1

Original Biagosch & Brandau lever scissors with cutting table For sale is an original lever scissors from the company Biagosch & Brandau (Hamburg) with a stable work table. A massive, functional piece of German industrial history – ideal for workshops, manufactories or as a decorative loft object. Cutting table - Material shears - Table shears - Lever cutter - Cutting machine Condition: Original condition, with authentic patina, approx. 100 years old Mechanics and levers run smoothly Cutting function available, would have to be sharpened No cracks, fractures or missing parts Cleaned, not restored (deliberately left for industrial charm) Technical data (approx.): Cutting width: approx. 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With extendable storage table for clippings Material: Cast Iron / Steel Condition: used, ...

Cardboard scissors Biagosch & Brandau Manufacturer Biagosch & Brandau, Hamburg Cutting width: 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With pull-out tray for clippings

Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m

3 trimmers horauf SN140, automatic , in very good condition, year 99

Equipped with: Digital computer program with TFT color screen Security photocells Central table with air Side tables with air - Perfecta BSH 3 pile lift ( 2011) - Baumann vibrating table with air removal roller - Unloader Perfecta BA 3N ( 2011)

Cutting machine EBA 550 Year of construction 2007

High-speed cutter with 72cm cutting width Hydraulic pressure infinitely adjustable Electrical connection 400V/50Hz

Standard high-speed cutter with 82cm cutting width Hydraulic pressure infinitely adjustable incl. 2 knives Electrical connection 400V/50Hz

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

Motor for folding machine Eurofold / Foldmaster 235 / 435 / 200 / 400 Art.: PS2356

Face cutting knife for Polar 66 Art.: PS153 Ersatzteil Nr. / parts No. 446282 / 280403 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 805x95x9.7 mm. Number of holes: 14 / M: 10 Number of rows of holes: Packaging : Disposable crate

Messer für Papierschneidemaschine / paper knife - guillotine Polar 55 Art.: PS832 Ersatzteil Nr. / parts No. 241580 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 685x95x9.7 Number of holes M10: 14 Number of rows of holes: 2 Packaging : Disposable crate

Knife für Papierschneidemaschine / paper knife - guillotine Polar 76 Face cutting knife for Polar 76 Art.: PS342 Ersatzteil Nr. / parts No. 233231 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimension: 925x110x9.7 Number of holes M10: 14 / 2 lift holes Number of rows of holes: 2 Packaging : Disposable crate

Paper knife - guillotine Polar 78 / 80 Art.: PS223 Ersatzteil Nr. / parts No. 424409 (273893) (446280) Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 960x110x11.7 mm. Number of holes M10: 18 Number of rows of holes: 2 Packaging : Disposable crate

Messer HSS für Papierschneider / paper knife HSS - guillotine Ideal 7228 / 7260 (Krug & Priester) Art.: PS4409 Ersatzteil Nr. / parts No. 9000141 Qualität/ Quality : HSS Stahl Kanefusa from Japan Made in Germany Dimensions: 840x100x10 mm. Number of holes M10: 6 Number of rows of holes: 2 Packaging : Disposable crate

Shaftless Unwind Monomatic Typ MD 107 (150 mm core diameter) FIFE side edge control max. roller diameter 1,070 mm Web tension control device Multiple breaking device Trimming station Cutting accuracy +/-0.2 mm Automatic angle adjustment Automatic sheet length adjustment without gear change Working width up to 1250 mm min. Working width 600 mm, cutting length from 550 to 1500 mm Materials from 60 g/sqm to 150 g/sqm (unwinder max. 120 g/m2) Ionisation device Waste ejection station Shingled delivery Belt delivery extended to the end of the stack Counting device Pile delivery with jogger max. mechanical output 300 m/min Cerutti embossing station - suitable for surface embossing (steel - paper 1 : 1.85) Embossing calender output max. 250 m/min

Three knife trimmer - in-line Make Challenge Model CMT-330 Year 2005 Serial 05010048 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode Memory up to 99 set-ups Change over time Fully automatic within 20 seconds Details 56600 Tilt in-feed conveyor + 56421 cooling down elevator + 56420 exit conveyor, this machine can be used in-line with a perfect binder Available direct

Three knife trimmer Make Challenge Model CMT-330-B Year 2010 Serial 10040217 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm ( Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode and 700 in Multi stream mode Memory up to 99 set-ups Change over time Fully automatic within 6 seconds Details 56416 manual in-feed conveyor + 58000 vertical stacker Available direct

Equipped with 3 standard tools : A : 207x174 mm B : 134 x 101 mm K :

Hörauf SN 140 three-sided cutter Art.nr. PS6211 Price 15500 Euro FCA Germany

Infeed Belt, Integrated Pre-Stacker, Integrated Control Panel, Security Guards, Delivery Belt, Max Untrimmed Size: 12.20" x 15.74" x 3.14", Max Trimmed Size: 11.80" x 15.27" x 3.14", Min Trimmed Size: 3.90" x 4.72" x 0.78", Max Thickness: 3.15", Max. Stacking Height: 3.14", Front Cutt-Off Width: 1.57", Head And Tail Cutt Off Width: 1.96", Capacity: 6.600 Cycles/Hour

One used cutting machine Polar 115 XT Tochscreen photocells chromed table Air table

creasing + cutting machine for board - slotting Make Krasue Model Creasing machine Creasing length 105 cm Creasing depth adjustable/variable Cutting length 30 cm slotting Cuting width 4 mm Function creases and cuts board in 1 cycle for making boxes, maps, etc. Available Direct

Hydraulic Llight guards 2 Knives, In very good conditions

Three Knife Trimmer With In-Feed, Magazine, Cutting Device, Delivery Belt Year of Construction: ca. 1990

One used guillotine Polar 78 ES year 1998

One used guillotine Polar 115EMC MON year 1994 with monitor programming sidetabes chromed table

A used cutting machine Polar 92 E Year of manufacture 1996 Devices Air table Side Tables Display Program

POLAR 137 ED AT 2000 Autotrim Program Air tables Polar lift Jogger RA Transomat

POLAR 176EMC 1993 Autotrim Air tables Polar lift Jogger RA Transomat

- Programm - air table - side table left and right - spare knife

Three Knife Trimmer Size: 32x42

Electro Foam cutter Make Neolt Model Ekectro Foam 160 Year 1999 Max Size 45up to 160 cm Thickness up to 30 mm Details Electric knife movement, electric clamping, with second cutting head, will cut Foam & Forex Available direct

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120 The mentioned cards were taken out of a fully operational cutter.

Central and lateral air tables Light guards Chromed tables Digital program

Polar 92X High speed cutter Year 2004 Program Large side tables Spare knife Photocells

Wohlenberg 155 CUT-TEC Reference No.: CU-001414 cutting-Line 2000 width 155 cm with monitor programmable air table side air table Baumann Jogger BSB 6L Baumann Unloader BA 6N complete line regular service in production available: 08/25 located: Germany

Width 92 cm Year of manufacture 1997 Computer control with monitor Color monitor Air table with blower 2 side tables with air nozzles Rear table cover Price on request. We supply and install worldwide.

- Display - Program - Air table - Side tables - Jogger - Spare knife

Air table Chromed tables Light guards Hydraulic 2 Knives

Three Knife Trimmer With In-Feed, Magazine, Cutting Device, Delivery Belt

Automatic Three Knife Trimmer, Standard Accessories

- Program - Air table - Standard side table on the right - Formica side table left - Vibrating table - Spare blades

Advanced programmer Central air table Side tables with air Photocells CE Hydraulic drive of the pressure beam with fully adjustable force Cutting line Rear table cover opens for easy cleaning of the machine Spare knife Chrome table surface anti rust Cutting sticks, operating tools, paper tapping block, documentation. Technical data: Working width 920mm Stack height 120mm Weight 1720 kg 380V power supply Complete cleaned, checked and tested In full working conditions

Reference ID: PP-56192 Category: Guillotines Manufacturer: Wohlenberg Model: 155 Year: 2000 Max. size: 155 cm Condition: Good Location: Europe Availability: Immediately

Digital program Central air table CNS tables (antirust) Light guards 2 Knives Complete cleaned, checked and tested

Three knife trimer Horizon HT 30, well maintained and serviced, new PIN. In production ready condition with serial equipment and manuals.

Ref. 514 Impact Scissors "ROBUST" Cutting length 120 cm Table: 120 x 72 cm Weight: 350 KG Condition: Used machine / Tested / Functional Ref. 514 Guillotine Shear 'ROBUST' Cutting length 120 cm Table: 120 x 72 cm Weight: 350 kg Condition: Used machine / Tested / Functional

- Program - Monitor - Air table - standard side table, left side - Resopal side table, right side - without jogger - Spare knife

Reference ID PP-57040 Category Guillotines Manufacturer Wohlenberg Model cut-tec 115 Year Built 2003 Color - Impression - Working Hours - Speed - - Max. size 115 cm Min. Size - Condition Good Location Europe Availability Immediately

delivered and commissioning in 2023 Lifting and trailing vacuum cleaners For cutting, creasing and perforating up to 6 mm cutting thickness Suitable for paper, cardboard, corrugated cardboard and synthetic material

Manufacturer: Polar Model: DCM DCC-M Type: Die Cutter with Counter Pressure Year of Manufacture: 2010 Feeding: Hand feeding per stack Delivery: Inline banding system Technical Specifications - Minimum format for die cutting: 50 x 50 mm - Maximum format for die cutting: 170 x 250 mm - Minimum format after die cutting: 46 x 46 mm - Maximum format after die cutting: 166 x 246 mm - Minimum pile height: 35 mm - Maximum pile height: 120 mm - Minimum height of punch knife: 65 mm - Maximum height of punch knife: 145 mm - Maximum power of die cutting: 50 kN - Minimum power of die cutting: 7 kN - Maximum capacity depending on material: 8 measures per minute - Compressed air demand: 670 l/min Find more here - / Contact us at -

Very good conditions

A used cutting machine Polar 78XT Touch screen Side Tables Chrome-plated table Air table

Three-knife trimmer for ShortRun and SingleCopy Softcover products and Hardcover book blocks. The ShortRun D.09 Three-knife trimmer has extreme short change over time and no make-ready parts. Products are trimmed in two separate cutting stations, head and tail trim first and then face trim in the second station. Untrimmed : 325 x 430 mm - 92 x 122 mm Trimmed : 300 x 420 mm - 90 x 120 mm Thickness : 60 mm - 2 mm Head trim : 2 - 25 mm Foot trim : 2 - 25 mm Face trim : 2 - 25 mm Speed : up to 2,400 cycles/hour (in short run mode) - up to 1,200 cycles/hour (in single copy mode)

Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATIC Year 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

; operational

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

in 2005 refurbished Still in operation: Yes Available: immediately