schuko peripheral equipment e.g. heating, conveying, drying used for sale

11 KW

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Schuko extraction system Motor 7.5 KW Volume flow 7100 m3/h Bagging filter Return air / exhaust air duct

Mobile dust extractor Brand: SCHUKO Type: Vacomat 160 XPe New machine Technical data: Connection Ø: 160 mm Filter cleaning: motorised Volume flow: 1.593 m³/h Nominal volume flow: 1447 m³/h Motor power: 2,2 kW Negative pressure: 2.200 pa Filter surface area: 9,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 69 dB(A)

mobile extraction Brand:SCHUKO Typ: Vacomat 200 XPe Techncal data: Connection Ø: 200 mm Filter cleaning: motorical Nominal volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Dust level M, AWN 16 Noise absorbation: 73 dB(A) Test sign H3 / BGHM HO 123027

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

Guiding machine / measuring machine Year of construction 2025 7.5 kW Filter area 32m^2 Intake manifold: 300 Dimension: LxWxH: 3,650x1,540x2,570

2.55 KW

Briquette press Compacto 1100 SH with filter house 100 filter Filter length 3 m Filter diameter 15 cm Filter area 142 sqm Air flow rate of approx. 21,000 m3/h Throughput capacity approx. 100 kg/h

Manufacturer: Schuko, Year: ca.1990, Control: yes, Supply air filter covers: 1, Heizmedium : Warmwasser, Splashback dry: yes, Length max mm: 3000, Width max mm: 1600, Number of spray booths: 1, Supply air system: yes, Hand spraying stations: 1, Absaugfläche m²: ca.4, Zuluftgerät kW Leistung 1: 89,6, Heating agent warm water: yes, Engine power kW: ca 4, Ceilings for incoming air: 1, Year :ca.1990

Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg

A Schuko filter unit with a Nestro centrifugal fan is sold. Schuko STA filter system Filter area 90sqm Number of filters 90 Filter length 2000mm Dimensions approx. H= 3.9m Length = 3m Depth 1.15m Nestro 7.5kw/380V Volume flow 7650 m3/h Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded.

Specifications: Vnenn: 2,950 cbm/h Vmin: 2.251 cbm/h Suction nozzle Ø 200 mm Motor power 3.7 kW Rated speed 2,805 rpm Rated current 7.5 A Frequency 50 Hz, 3 phases Test class H2 Vacuum at Vmin at the interface between dust collector and dust generator (4 m hose) with suction nozzle Ø 200 mm = 2,200 Pascal = 22, with suction nozzle Ø 180 mm = 2,500 Pascal = 25 Filter cleaning by compressed air (to be triggered manually, compressed air connection on site, max. 4 bar) Delivery incl. various chip collection bags

The Octopus sanding dust extraction table is ideal as a work table for dust-free sanding work. With its different footprints of 1.3 to 3.3 m², it offers a safe contact surface for both small and large workpieces. The work surface is made of trapezoidal pressed sheet steel with dust extraction openings and coated with resistant felt in a workpiece-friendly manner. Extraction connection: 200 mm Table length: 3280 mm Weight 200 kg

Extraction system manufactured in 2022. This SCHUKO Solo-160-2323/30/182/BD features an impressive airflow of approximately 15,500 m³/h, designed for handling dry plastic chips. It includes a total filter area of 182 m² and a filter hose diameter of 160 mm. If you are looking to get high-quality extraction capabilities, consider the SCHUKO Solo-160-2323/30/182/BD machine we have for sale. Contact us for further details.

Blowing diameter: 300mm; Spähne bags: 4; Filter Holes: 16; Filter cleaning: manual; Dimensions: approx.: 1900 x 670 x 2800 mm (L x W x H);

Conveyor with modular belt, stopband, stopwatch with dimensions: tape width 510 mm Tape length 1800 mm SEW geared motor with brake 075 kW, 1380/42 rpm Self-collection in the area: Kędzierzyn-Koźle, Opole Voivodeship or by arrangement. This product is in stock. Joanna Multi-Industry Company + 77 482 44 99

Type HLP Voltage 220 V Power 400 W Length 120 mm Diameter 8 mm Made in Germany Weight 70 g

Length 1155mm Thread diameter 47 mm Power 1500 W Voltage 230 V Transport dimensions 1220x70x70 mm Weight 0,8 kg

Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 6,666.00 for two gluing units: EUR 9,999.00 Delivery time: approx. 4 weeks

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing section, gluing head, heating tank for edgebanders, edgebanding machine, melting unit with granule container -With the pre-melting device, you always have enough hot melt adhesive available. -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

Steam boiler white Year of Make: 1994 last MOT 2024 Power 6000 kW permissible. Operating overpressure 1.0 bar permissible. Superheated steam temperature 120 degrees Celsius Boiler capacity at N-W 16670 ltr. for firing with chips and wood chips incl. oil burner as a replacement fire option

Binder heating system Wood chip heating Type RRK 640-850 Year of construction 2013 For steam and hot water production Heating capacity up to 850 kW Maximum operating temperature up to 150 °C Maximum operating overpressure 12 bar Water capacity 1520 litres Hydraulic insertion from the right front side (instead of stoker auger) Heat exchanger separately Without material feed from the bunker Flue gas cleaning via cyclone

Mawera heating system Wood chip heating Type FU 550 RIA Year of manufacture 2001 Heating system for wood chips Insertion with feed screw Stoker screw Heating capacity up to 550 kW Including dismantling and loading

Combustion chamber output: 175 kW; Working power: 140 kW; Smoke flue diameter: 200 mm; Hot air delivery pipes: 1 x 500mm; Furnace length: 950 mm; Furnace width: 600 mm; Furnace height: 860 mm; Air flow rate: 8900 m³/h; Power consumption: 3500 W; designed for room volume: 3000 m³; Area to be heated: 500/600 m²; Furnace height without hot air delivery pipes: 2200 mm; Furnace width: 930 mm; Furnace length without flue gas fan: 1700 mm; Weight: 615 kg; Hot air furnace with a combustion chamber made of stainless chrome thermal steel, with reinforcing fins and flue exchanger. On

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

SECOND-HAND DRYING KILN COPCAL - traditional heating system - capacity 70/80 mc - dimensionst mt 9,5x6x5+1H

Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

I am selling a disassembled Kovos SR 4 dryer without electronics. Without thermal insulation (glass wool) 2x fans, 2x heating coils. Dimensions of the dryer: Exterior height 3.2 m x width 4.1 m x length 4.55 m, interior height 2.1 m x width 3.8 m x length 4.1 m. The dryer is complete, it is possible to visit it partially built. Described parts for assembly. Material aluminum, very good condition. It was stored in the hall for 15 years.

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Drying chamber Mühlböck Already dismantled and stored in a dry place, ready for collection Type ZLSM -4x1.20-3x1.20-04.72 Year of construction 2003 With control Interior dimensions gross 7.40 x 4.55 x H 4.25 meters Gross stacking capacity 73 m³ Stacking depth 5 x 1.20 m + 4 x 0.10 m Stacking height 3 x 1.20 m + 3 x 0.10 m + 0.30 m Interior length 2 x 2.10 m + 0.52 m With ventilation via false ceiling 3 fans each 3 kW 10 measuring points With frequency converter for connection to an external hot water heating system or hot water pipe Heating capacity 223 kW Water temperature 85 °C Water volume 14 m³/h Voltage 230/400 Volt Total connected load 12 kW Control Program MB 8000 PC Remote control via modem via RS485 connection Drying assistant Danfoss VLT 6000 HVAC Variable Frequency Drive Clear door height 4200 mm Clear door width 4560 mm External dimensions 770 ...

Manufacturer: IST UV Trafo für 40 Watt Lampen, Type: IST,

Auction-ID: A7-46032-25

Manufacturer: IST UV Trafo für 40 Watt Lampen, Type: IST,

Manufacturer: IST UV Trafo für 80 Watt Lampen, Type: IST,

Manufacturer: Bürkle, Type: UV Lampe, Year: ca 2018, Work piece width min-max mm: 1300, Length mm: 1420, Year :ca 2018

Manufacturer: IST, Year: 1996, Number of lamps: 1, kW power 1 lamp: 11,4, Adjustable: no, Power per lamp watt UV: 80, Working widht mm: 1350, Stabteilung mm: 80, Conveyor length mm: 2500, Outer belt width mm: 1650, Working hight approx mm: 950 +-, Feeding speed m/min: 2,5-6, Conveyor: Stange, Drive power kW: 2, Exhaust air diameter mm: 180, Year :1996

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Number of lamps: 3, Lampen gerade eingebaut: 3, Power per lamp watt UV: 80, Electrical power consumption kW: ca 47, Year :1995

Manufacturer: IST, Year: 1992, Number of lamps: 1, Power per lamp watt UV: 80 W/cm, Working widht mm: 1.400, od distance mm: 100, Conveyor length mm: 3.200, Outer belt width mm: 2.300, Working hight approx mm: 950, Feeding speed m/min: 10 - 20, Working widht mm: 1.400, Through running hight mm: 80, Rod transportation: yes, Year :1992

Manufacturer: Technigraf , Type: Aktiprint S, Year: 2002, Work piece width min-max mm: 1300, Number of lamps: 2, Lampen gerade eingebaut: 2, Power per lamp watt UV: 2 x 120, Working hight approx mm: 5 - 35, Conveyor: PTFE Band, Through running hight mm: 20, Year :2002

Manufacturer: Purete, Type: PRT-U1113X, Year: 2019, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 3,78, Lampen gerade eingebaut: yes, Lampen von unten: no, od distance mm: 38,7, Conveyor lenght mm: 1.200, Drive power kW: 1,2, Rod transportation: yes, Electrical power consumption kW: 5, Required space L x W x H mm: 1.200x1.850x1.750, Year :2019

Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004

Manufacturer: Bürkle, Type: UV Transportband, Year: 2001, Work piece width min-max mm: 1350, Lampen gerade eingebaut: 1, Conveyor lenght mm: 5000, Drive power kW: 1,1, Year :2001

Manufacturer: Bürkle Transportband ohne UV Einheit, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: 11, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2500, Lamps straight installation: yes, Conveyor: 6-30,

Manufacturer: Bürkle UV Trockner, Type: UV Modul, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Number of lamps: 1, kW power 1 lamp: 80 W/cm, Lampen gerade eingebaut: yes, Adjustable: no, Position of lamps: gerade, Conveyor lenght mm: 5000, Chain pitch mm: 76, Drive power kW: 1,1, Working height in mm: 950 +/-, Through running hight mm: 3-80, Feedin speed m/min: 5-25, Rod transportation: yes, Year :2001

Manufacturer: Hackemack, Type: KTR, Number of lamps: 1, kW power 1 lamp: 11,20, Adjustable: Halblast, Position of lamps: gerade, Power per lamp watt UV: 60/120, Working widht mm: 1300, od distance mm: 76,2, Conveyor length mm: 2.000, Feeding speed m/min: 3 - 15, Working widht mm: 1300,

Inv. Num. : 8372 Type: ZLSM-4x1.20-3x1.20-0 Producer: Mühlböck Generated: Parameters: Depth: 5400 mm Height: 4200 mm Length: 6520 mm Capacity: 12 x 8 63 m3 (103 68 m3) Load: 100 kg per 1m2 Number of fans: 4 pieces

Manufacturer: Hackemack 2 Lampen UV Trockner, Year: 2000-2008, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Working widht max mm: 1400, Number of lamps: 2, kW power 1 lamp: 25, Lampenlänge mm: 1400, Lamps straight installation: yes, Elektronische Leistungregelung: yes, Outer belt width mm: 2400, Feeding speed m/min: 6-30, Conveyor: Band, Exhaust air diameter mm: 2 X 200, Year :2000-2008

Manufacturer: Bürkle, Type: TRUV, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 120, Number of lamps: 1, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Power per lamp watt UV: 120, od distance mm: 120, Feedin speed m/min: 5-25, Year :2002

An old drying kiln (approx. 40 years old) Brunner is available. External dimensions X/Y: approx. 6000mm/8000mm. On-site inspection is possible.