schunk accessories for machine tools used for sale

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

SCHUNK 2 finger parallel grippers and Rotary unit new Parallel grippers: PFH 40-AS / 302041 Rotary unit: OSE-A34-4 / 354304 Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws -Manufacturer: Schunk, soft top jaws 1 set = 3 pieces -Type: SWB-FR 131 -Dimension box: 75/90/H50 mm -Weight: 1.1 kg

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks -1 sentence: hard cheeks -4 sentence: soft cheeks -Hole spacing: 44 mm -With: chamfered groove and pointed teeth Price: complete -Weight: 50 kg

Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks -4 sentence: hard cheeks -7 sentence: soft cheeks -With ground groove and pointed tooth pitch: 1.5 mm -Price: complete -Weight: 6 kg

diameter: 315 mm bore diameter: 91 mm turning speeds: 4000 U/min weight of the machine ca.: 72 kg Like new 2 Jaw power chucks, - Quick change system - 1 set ground jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus static tethering station -both sides: ground -Clamping rings: with ground short cone for positive locking connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Quantity: 25x available Price: per piece -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg

For sale are several hydraulic expansion chucks from Schunk Prices and other inventory on inventar-verkauf.de/id/alesco The condition is used. There are usual signs of wear. I would be happy to make an offer for all of them in the package.

- Clamping force 4 - 30 kN - Weight 19.5 Kg - Single stroke vice

Productkenmerken: - 4-klauw compensatiespantang - Centrische compensatie van de tegenoverliggende kaken - Spindelhouder: ISO 702-4 Nr. 8 (Z220) - Bekinterface: 1/16 x 90° Moer 17H7 Technische gegevens: - Slag per kaak: 9,5 mm - Compensatieslag per kaak: 5,1 mm - Maximale klemkracht: 100 kN - Maximaal koppel: 120 Nm - Maximale rotatiesnelheid: 2200 1/min - Gewicht: 63 kg

Technical Description – Schunk ROTA 2B 160 Designation: Manual Two-Jaw Wedge-Style Chuck Manufacturer: SCHUNK GmbH & Co. KG Model: ROTA 2B 160 Design: Manually operated wedge-style chuck with 2 self-centering jaws Typical Technical Data: Chuck diameter: 160 mm Number of jaws: 2 Actuation: Manual via chuck key Clamping mechanism: Wedge hook system (for high clamping force and reliability) Central through-hole: approx. 40–45 mm (depending on version) Mounting interface: Flange or direct mount, e.g., DIN 55026 A5 (depending on configuration) Max. clamping force: approx. 30–35 kN (depending on applied torque) Repeatability: typically ? 0.02 mm Application: Suitable for irregular or sensitive workpieces; ideal for use on lathes, indexing fixtures, and custom setups Material: Body and clamping components hardened and ground for extended durability Key Features: Two-jaw version for spec ...

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Assortment of tools / accessories for die-sinking EDM machine Without! Surface-mounted clamping aids and HIRSCHMANN clamping elements!

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Various parts. Auction-ID: A1-47074-64

Machine clamp. Auction-ID: A1-47074-68

Auction-ID: A1-40976-133

Auction-ID: A1-40976-134

Accessories and tools for Mori Seiki SL 15

Accessories and tools for Mori Seiki SL 15

Chip tipping bucket

Chip tipping bucket

EROWA Pallets ER-024323 There is a new EROWA pallet of type ER-024323 for sale. The pallets are in their original packaging.

Multifix size C 14 pieces. Used See pictures Viewing desired By appointment

Machine clamp.

EROWA Pallets ER-024323 There is a new EROWA pallet of type ER-024323 for sale. The pallets are in their original packaging. Auction-ID: A1-46872-15

Brand: TUL Type: CNC Tool Storage Cart (1 wheel that doesn't work) Model: SK50 (ISO50) tool holder compatible Capacity: approx. 20–25 units Manufacture: steel structure + TUL moulded supports in industrial composite Miscellaneous Tools see photo Auction-ID: A3-43535-33325

Multifix size C 14 pieces. Used See pictures Viewing desired By appointment Auction-ID: A7-46993-4

Accessories and tools for Mori Seiki SL 250 Auction-ID: A7-47048-71

Accessories and tools for Mori Seiki SL 15 Auction-ID: A7-47048-70

Accessories and tools for Mori Seiki SL 15 Auction-ID: A7-47048-69

Chip tipping bucket Auction-ID: A1-47219-54

Chip tipping bucket Auction-ID: A1-47219-55

Dimensions: White long: 295x58x40 Black cooling water tank: 260x45x40 Black chip conveyor: 190x57x115 White cooling water tank: 100x100x118 Auction-ID: A1-47219-15

Chip tipping bucket Auction-ID: A1-47219-53

Chip tipping bucket Auction-ID: A1-47219-52

Pallets with various materials (garden tools, brooms, etc.) Auction-ID: A1-47219-162

Lot consists of industrial drilling tools, diameters Ø5.5 mm, Ø10.6 mm Auction-ID: A7-46756-229

Mixed lot of MAPAL WWS tooling system. Includes 1x indexable cutting head and 1x Ø16 MAPAL tool (30320052), along with screws and documentation. Auction-ID: A7-46756-209

Set of adjustable hand reamers by Walton Tools (USA, West Hartford, since 1908). Includes two plastic cases with multiple adjustable reamers and blades in various sizes Auction-ID: A7-46756-210

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Including milling heads and holder Auction-ID: A1-43894-55

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040)

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

dimensions of the machine ca.: 380 x 200 x 134 mm weight of the machine ca.: 24 kg power requirement: - kW baseplate-clamping range: 110 x 70 mm workpiece sizes: max. 56 x 70 x 25 mm profile depth: max. 15 mm angular adjustment: 0-2 ° Condition: unused: Electrik 24 Volt: Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of a vice, jaw width: 160 mm and a three-jaw chuck from the manufacturer RÖHM, diameter: 400 mm Reference: Schmidt - Lot 12 Weight: approx. 150kg

Including milling heads and holder

Revolving Center MK - 5 with changeble points

Knoll High Pressure System KF 110/700 Year of Make: 2017 Paper Belt Filter Tank capacity: 600 litres Mas. Pressure: 70bar Little used. Like new

WKZ spindle SK40 Used

Details: Year of construction 2021 The Haimer Power Clamp Economic Plus NG is a high-performance shrink device that is known on the market for its high reliability and precision. Its low power consumption and robust construction make it an ideal choice for any workshop. Technical data: Power consumption: 1.5 kW Shrink range: 3 - 32 mm Dimensions (L x W x H): 600 x 800 x 1200 mm

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040) Auction-ID: A1-43894-29

Including clamping tools, drills, inserts, tools, in 1 cabinet (700x730x1040) Auction-ID: A1-43894-30

Includes hinged door cabinet with accessories Auction-ID: A7-46939-46

consisting of a vice, jaw width: 160 mm and a three-jaw chuck from the manufacturer RÖHM, diameter: 400 mm Reference: Schmidt - Lot 12 Weight: approx. 150kg Auction-ID: A7-46763-70

Consisting of various rotary tables, dividing heads and a magnetic clamping plate suitable for DECKEL milling machines Reference: Hüpometall - Lot 26 Weight: approx. 300kg Auction-ID: A7-46763-102

consisting of 33 pieces HSK 63 tool holders equipped with cutting tools such as milling cutters, drills and boring tools as well as posts of clamping jaws and a matching tool carrier rack Reference: Hercegfi - Lot 59 Weight: approx. 400kg Auction-ID: A7-46763-228

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Tool holders SK30 - Approx. 60 spindle tools - Thread compensation holder - Approx. 40 collet holders Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Chip protection booth - With safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Flanges and Divereses

High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.

Roller movement Offer number: 80051 Technical data: - Roller aisle consisting of 2 side-mounted roller conveyors - Roll width 50 / 70 mm - Roll diameter 50 mm - Number of rolls left + right each 60 pcs - Total width of the roll aisle 200 mm - Length 3250 mm - Height approx. 740 mm - Weight approx. 60 Kg

2x Bilz FAEBI 430 + 2x Wedge Shoes - Rubber Air Springs / Machine Feet - 2x wedge shoes + base - 2x Bilz FAEBI 430 rubber air springs + substructure - 9x spacers - By adjusting the air pressure, the deflection behavior can be adjusted - Wear-resistant, low-maintenance air damping, easily adjustable from the outside - No transmission of structure-borne noise Specifications FAEBI 430 Rubber Air Spring: - Load: 2750 - 6500 daN - Max. pressure: 6 bar - Cushion height: approx. 90 mm - Cushion diameter: 480 mm - Support diameter: 315 mm - Dimensions incl. substructure LxWxH: 510 x 510 x 200 mm - Threaded rod: M20 / 180 mm Wedge shoes: - Dimensions incl. substructure LxWxH: 330 x 250 x 200 mm Spacers: - Diameter: 470 mm - Thickness: 2x 4 mm / 2x 2 mm / 2 x 1.5 mm / 3x 1 mm

4 STK. LANGE FRÄSDORNE FOR HORIZONTAL FRÄSEN SK 50 FOR 22 mm, 27 mm, 32 mm, 40 mm THE FRÄSDORNE ARE IN A VERY GOOD CONDITION

Tube spice MK 5 125-200 mm NEW

Fixed and walking lunettes for FAT Poles TUR 560 and TUR 630