werner _ pfleiderer rubber machines used for sale

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Lab Mixer Tangential Chamber volume 2,8 l / 2 l netto Sliding door AC motor 22 kW Year 1971

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

Refer to code 1004 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1006 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1013 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1001 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

Refer to code 1125 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1126 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1183 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

chamber volume: 4 und 5 liter useable volume: -- liter friction: - motor drive power: 2x 37,5 kW Condition: used or reconditioned Specification: 2x laboratory internal mixer – used Consisting of two mixing chambers: Type: GK4N - Capacity: approx. 4 litres - Rotor geometry: tangential type - Ram: pneumatic - 1 independent DC motor: 37.5 kW Type: GK5E - Capacity: approx. 5 litres - Rotor geometry: Interlocking rotors type - Ram: Hydraulic - 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due to severed cables, or refurbished with new electrical parts, with CE certification and warranty. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.

Key data: 38 liter, 25 liter

Werner & Pfleiderer Mixer Model GK12 Rotor type Tangential Total chamber volume 38 L Unable volume. 25 L Complete with motor Electrical control panel Chamber dims: 40x40x40cm = 0,064m3 Rubber used: EPDM, Natural EPDM, NR BR.

Qty 1 x Werner & Pfleiderer tangential (Banbury type) Lab internal mixer, Type: GK-1.5N Year: original 1982 Volume: 1,5 L Friction: fixed Gear-box ratio i:1: 13,51 / 15,00 Rotor Speed: variable Ram: pneumatic Discharging: drop door Drive: 22 kW, 440V DC variable speed. Automatic lubrication. In very good condition. Complete with electrical controls etc. Overall dimensions (approx) 2m x 1m x 1.8m high, weight: 1.8ton

1 x Werner & Pfeiderer (Homrich) model LH30A Banbury type internal mixer, Machine no. 1134/Kom nr: 68314, original year: 1969, Hydraulic drop door, chamber volume: Useful 41 litre, Batch weight: 37kg at SG 0.9, 49kg at SG 1.2 and 57.5kg at SG 1.4, pneumatic hopper, full unidrive gearbox Input 1500rpm, output 45/50rpm, with 150kW DC variable speed motor. Mechanically in very good condition, but without electrical controls.

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!

Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm

Berstorff Rotocure AUMA 20-S Drum dia: 2000mm Drum width: 2600mm Sandvic Steelbelt Description attached!

machine measurements: 1500 x 2400 x 1150 mm machine weight: -- kg power capacity: 12 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 3.000 mm machine weight: -- kg power capacity: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 85 mm cross-section heigth:: 25 - 40 mm feed:: 1 - 999,999,9 mm speed of feed:: 60 m/min cuts max.:: 100 - 120 Schnitte/m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.:  ...

Fogg & Young Bale Cutter

cross-section width:: 700 mm cross-section heigth:: 500 mm feed:: -- mm Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking, Option: - Output roller conveyor new The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

REP H48Y10W Horizontal Injection Moulding Machine Year of construction 2005 Machine Parameters Volume [cm3] 1000 Clamping force [kN] 1930 Injection pressure [bar] 1500 Moulds dimension [mm] 450x450 Tonnage 1.9t Platen size: 450x450 Cycles: 2,220,383 General condition: operational Dims [mm]: 4200 L x 1400 W x 2200 H Weight [kg]: 6750

Refer to code 1049 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Z-Splicing Machine Make: Z-AUTOMATION Model: Z splicing stand alone Year 2014 8 kW, 6 bar Profile Cross sections 50 x 40 mm 2 - 4 splicing cavities Length 4600 mm Siemens Simatic HMI touch screen control Foot pedal control Emergency kill switch

Merkle Slitter 500mm wide

USI Cumberland Grinder / Granulator 28x20 50 Hp 8mm Grid 2 new dead blades 3 sharpened fly blades One new start / stop control box

cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by servo drive - Cutting by servo drive - Pulsed feed - Connected load approx.: 5 kW - Operating voltage: 3 x 400V, 50Hz, PE - Weight approx.: 550 kg - Dimensions (L/W/H): 1,940 x 890 x 175 ...

cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

cross-section width:: Schläuche max. 11 mm cross-section heigth:: 11 mm feed:: 0,5 - 100.000 mm Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No docum ...

Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10

Merkle Slitter Cutting width 1m Overall dims: 1.4m wide x 700mm deep x 1m high Weight: 500kgs

Merkle 500mm wide Slitter

speed of feed:: 50 m/min feed:: 5 - 99.999,9 mm cuts max.:: 70 - 80 Schnitte/m cross-section width:: 40 mm cross-section heigth:: 40 mm Condition: NEW, Specification: Hose and corrugated pipe cutting machine electric cutting machine - Cutting unit: Window cut with cutting bushes - Material diameter approx.: 4 - 40 mm - Transport by two drive belts - Max. distance between the belts: 45 mm - Belt adjustment via motor, adjustment via control panel - Belt adjustment via the centre - with a maximum speed of approx.: 50 m/min - Electrical contact pressure of the drive belts - Electronic length measurement from 5 - 99,999.9 mm Digital display - Step change: 0.1 mm - Cutting via electric motor - Quantity selectable: 1 to 99,999 Display digital - Cutting capacity approx.: 70 - 80 pieces/min at 100 mm l ...

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

Merkle Metzner Profile Automatic Cutting Machine Model XCL Material direction right to left Type of cut: Die cut/scissor cut Year 2002 Belt feed Width of belt 100mm Contact belt 200/400mm Poly-v belts Material acceptance: max. 100x30mm Drive Stepping motor, 3 phases Max. feed rate 40m/min Max. torque 420 Ncm Connection values Voltage 230V Pressure: 6 bar

John Marshall Cutter

Autogil Cutter

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 Condition: Used, reconditioned Specification: Press 600 x 630 mm, second-hand - clamping force: 300 tonnes (3,000 kN) - closing: from bottom to top - Heating platens: 2 electric platens, with new heating rods - Heating platen dimensions approx.: 600 x 630 mm - Distance between the heating platens approx.: 420 mm - New electric valves - AC machine output oil pump: 5.5 kW - New control cabinet with Siemens 7’ touch panel - PLC control system make Siemens S7-1200 - New cabling - Frequency inverter made by Schneider - Light barriers in the front area, Overhauled in accordance with CE standard safety regulations Operating instructions and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS ...

New Zig-Zag Cutter! Machine is designed to cut an 800mm Batch into an endless strip for Extruder feeding. 12 month Warranty! Description attached!

machine measurements: 2.100 x 2.200 x 2.100 mm machine weight: 2.000 kg power capacity: 36 kW Condition: used Specification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand - Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene. - PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying - All cleaning cycles are freely programmable. - Filling volumes: Tank 1: 170 litres Tank 2: 80 litres - Type of solvent: Perchloroethylene - Total connected load of motors: 9.65 kW - Installed electrical power incl. heating syst ...

Key data: 2000 mm, 1300 mm

available Berstorff Bias Cutter Angle 0-50 degrees with manual splice 90 degree with automatic splice Ce certified Description attached!

volt: 380 V weight: 1,4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cevenini Log Cutter Model M200 1.5m wide x 200 mm diam. Complete with motor

machine measurements: ca. 1030 x 1110 x 1950 mm machine weight: 800 kg power capacity: ca. 2,8 kW Condition: used Specification: SiloStar 924 dosing system - used - For dosing liquid silicone LSR - LSR dosing with servo-hydraulic unit, servo motor 2.8 kW - Dosing with piston pumps - Uniform emptying of components A + B via proportional compensation cylinders - Variable mixing ratio - Touchscreen with visualised user interface - Containers: 200 litre drums - Operation via 10 inch touch display - Automatic mixing material pressure control with sensor directly on the mixing block - Pressure sensor for A + B - Circulation device A + B - Power connection: 380-480 VAC, 50/60 Hz (3P + PE), 16 A - Mixing head machine connection - Hose package 2x nylon DN 16 x 2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Blackfriars Rotary Cutter / Granulator Model 12 ASHD/267 With sound booth

UNTHA Shredder Model RS30 Year 10/2023 Hours: 97 Power 22kW 400V/50Hz CE marked In ‘as new’ condition

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: 210 - 220 °C piston stroke:: ca. 400 mm no. of stages:: 1 Condition: Used, reconditioned Specification: 4-column vulcanising press 480 x 520 mm, used - Clamping force: 100 t - Closing action: bottom-up - Heating plates: 2 electric plates - Two new heating elements - Plate heating temperature: up to approx. 210–220 °C - Heating plate dimensions: 480 x 520 mm - Distance between heating plates approx.: 400 mm (to be determined during refurbishment) - Working height of lower plate: approx. 1,100 mm - AC motor: 5.5 kW (to be determined during refurbishment) - New solenoid valves - New control cabinet with Siemens 7 touch panel Type KTP700 Basic - Siemens S7-1200 PLC system - Schneider frequency converter - One remote maintenance unit - New cabling - Light cur ...

Key data: 3000 kN, 762 mm, 200 °C

Condition: Factory Rebuilt Model: 3000kN BIPEL Press Application: Compression Moulding Mode of Operation: Manual and Semi-Auto Frame structure: Steel plate frame Cylinder type : Double acting Push back cylinder(s) : Pressing force kN: 3000 Pull back force at circuit pressure kN: 300 Operating height mm : 820 Stroke mm : 610 Daylight between Tables mm : 1205 Table size L -R mm : 785 F-B mm : 890 Opening speed mm/sec: 200 Pressing speed mm/sec:  ...

Key data: 3000 kN

Bed Size: Left to Right 785mm 30 1⁄2 in Front to Back 890mm 35 in Daylight Between Tables 1206mm 47 1⁄2 in Daylight Between Heated Platens 841mm 33 1⁄8 in Heated Platen Sizes(Up To) 760mm x 610mm 28″x24″ Max Working Platen Temperature 220°C 428F Main Ram Stroke(Up To) 610mm 24 in Hydraulic Circuit Pressure 210 Bar 3000 PSI Main Ram Pressing Force 305 T 300 Ton Maximum Pummel Diameter 102mm 4 in Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

1 x Alpha Technologies Mooney MV2000e Viscometer software discs and operation manual are included. You will have to register the software. PC not available. In good condition.

1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Knife Drawing No. 05714-223C1

Guided from bronze Drawing No. 05714 -227D1

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 120 mm screw length:: 17D screw speedl:: 42 U/min drive power:: 138 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: für Extruder 90 mm screw length:: -- screw speedl:: -- U/min drive power:: 13,6 kW Condition: little used, as good as new Specification: gear pump ZP 75/50 for extruder size 90 - SEW helical gear units: R 97 - Siemens direct current motor: 1 GG5 118 - Drive power: 13.6 kW, 57 A - curved tooth coupling - With clamp for the head connection, - Clamping flange for extruder and head connection, - Base plate with linear guide rails, - Tooth shaft diameter: 75 mm - tooth width: 50 mm - helical gearing, hardened steel bearings, right-hand drive - without control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...