AKYAPAK ahk used machines

Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm

I - beam section - flat steel: 50 x 10 mm I-beam section - upend: 80 x 15 mm I-beam section - upend: 80 x 15 mm L-beam: 50 mm round material: 30,0 mm bar material dia. max.: 1 1/2 mm bar material - diameter: 30,0 mm weight: 185 kg range L-W-H: 670 x 530 x 1350 mm square material: 40 x 40 x 3 mm pipes: 60 x 2,0 mm total power requirement: 0,75 kW Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

Max tube diameter 76 mm Max Tube thickness 3 mm Max lenght 6000 mm

sheet width: 3100 mm plate thickness: 40 mm pre-bending: 32 diameter of upper rolls: 460 mm diameter of lower rolls: 420 mm side roll diameter: 360 mm power capacity: 30 kW min. bending diameter: 1380 mm weight of the machine ca.: 30,1 t dimensions of the machine ca.: 6,3 x 2,3 x 2,6 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Eur ...

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m 4-ROLL Hydraulic Plate Rolling Machine Working length 3100 mm Maximum thickness Pre-bending 40 mm Bending 50 mm Yield Point: 240 N/mm2 Number of rolls 4 Motor Power 55 kW Min. diameter mm - Ø Top Roll Diameter x 3 Top roll Ø 540 mm Bottom roll Ø 510 mm Side roll Ø 440 mm Length 6700 mm Height 3000 mm Width 3000 mm Weight 40.000 kg With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Dual bending speeds Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the  ...

Diameter of bending rollers 550 mm Drive Type Hydraulic Main motor power30 kW

This hydraulic press manufactured in 2010 features a normal pressure of 1250 KN and a maximum working width of 3200 mm. It has a throat depth of 350 mm and a cylinder stroke of 160 mm. The machine operates at a working speed of 9 mm/s and has a robust construction with a weight of 8600 kg. If you are looking to get high-quality pressing capabilities, consider the KNUTH AHK A 32125 machine we have for sale. Contact us for further details.

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Stock number: P229, Side channel pump, stainless steel,, type AHK 25-11/1., Mounted on painted foundation with wheels., 0,75 kW motor, 1400 rpm, 220/380 V., With motor shield., Material: Stainless steel AISI 304

Honda CR-V 2.2 i-DTEC Executive Registration date: 03.11.2011 Mileage read: 164,077 km Power: 110 kW / 150 hp Displacement: 2,199 cm³ Diesel engine 6-speed manual transmission Euro 5 Colour: Brown Metallic Trailer hitch available Panoramic glass roof Beige leather interior Electrically adjustable driver's seat Navigation system Automatic climate control (dual-zone) Cruise control Front and rear parking aid 18-inch alloy wheels Roof rails Side skirts /tread tubes Bull bar Webasto remote control available Technical inspection valid until 11/2026 1 vehicle key available Registration certificate Part I available Service documents partially available Vehicle shows signs of wear due to age and mileage Dent and paint damage in the lower area of the right side of the vehicle Scratches and damage to the rear bumper present Underbody trim damag ...

Truck DAIMLER CHRYSLER Actros 2644 with loading crane HIAB 330-5 + Jib 90-4 Truck DAIMLER CHRYSLER Actros 2644, B9th3af Wheel drive 6x4, air suspension front and rear, AHK, open box with charger, FG-No. WDB9302441xxx EZ 06/04, GG 26 t, km-stand approx. 417,000, diesel, green badge, HU 09/19, 11.946 cm3, 320 kW Crane Hiab 330-5 with radio remote control Jib 90 with winch Rotzler, 3 hydraulic ejectoons + 1x mechanical ejectothe. Maximum extension 26m with lifting force 690kg

- Body: Meiller three-way tipper - Rear view camera - AHK - Good tires - Ready to drive; - Condition see photos; - Viewing recommended; Auction-ID: A1-47754-20

Hand Tools Painter, ehm. Vehicle contents such as various construction spotlights, heating stove can be rolled, small quantities of hand tools, small quantities of work clothes, AHK bicycle racks, paint masks, toilet seat, contents of various boxes distributed on 3 pallets, without pallets

- Sold as a spare parts dispenser; - Not complete, see photos!; - Engine: 300 TDi 4 cylinder diesel; - from 1st hand; - Directly from the army of the British army; - RHD / RHD; - AHK; - Former TUM HS FFR vehicle; - Reinforced frame for heavier loads ( Extra Duty ); - Various holders on the bonnet for spades, camouflage net trays, etc.; - Folding windshield; - Fuel tank storage compartments with square storage compartment flaps on both sides of the vehicle; - 24-volt on-board electrical system; - reinforced axles (base: Range Rover P38a); - Military bumper with front open-end coupling; - Date in Service - Certificate is provided; - No German registration; - Not ready to drive!; - Condition see photos; - Viewing recommended; Auction-ID: A1-47754-3

- Engine: 300 TDi 4 cylinder diesel; - 1st hand; - Directly from the army of the British army; - RHD / RHD; - Spare wheel (side); - AHK; - Former ( GS ) General Service vehicle; - Reinforced frame for heavier loads ( Extra Duty ); - Various holders on the bonnet for spades, camouflage net trays, etc.; - Folding windshield; - Side bench seats at the rear; - Fuel tank storage compartments with square storage compartment flaps on both sides of the vehicle; - Soft-top version: tarpaulin made of plastic; - 24-volt on-board electrical system (sometimes with a second 48-volt alternator for the radio system); - reinforced axles (base: Range Rover P38a); - Military bumper with front open-end coupling; - Goodyear G 90 tyres, good ! (approx. 60 - 70 % ); - Date in Service - Certificate is provided; - No German registration; - Condition see photos; Auction-ID: A1-47754-2

Equipment: 7804657 Brand: STILL Model No.: RX60-25 Hours: 6687 Year of Make: 2020 Mast: Telescopic mast Overall height: 3,275 mm Nominal stroke: 5,170 mm Free lift: Hydraulic Actuation: Multi-lever Battery: with Load capacity: 2,500 kg Condition description: Hydraulic hoses damaged Door, seat cushion damaged Front wheels damaged, out of round Rear wheels out of round Front axle noise Rusty frame Rear fairing dents Battery door rust spots Battery terminals collapsed Battery trough oxidized AHK rear Air conditioning Paint damage Fork positioner: AA: 1025 mm AI: 785 mm ZA: 320 mm ZI: 80 mm Auction-ID: A7-47742-122

Equipment: 7804634 Brand: STILL Model No.: RX60-25 Hours: 6863 Year of Make: 2020 Mast: Telescopic mast Overall height: 3,275 mm Nominal stroke: 5,170 mm Free lift: Hydraulic Actuation: Multi-lever Battery: with Load capacity: 2,500 kg Condition description: Hydraulic hoses damaged Door damaged, rust spots Rear wheels out of round Frame dents, rust spots Rusty rear fairing Battery cells increased Battery terminals collapsed Battery trough oxidized AHK rear Air conditioning Paint damage Fork positioner: AA: 1030 mm AI: 790 mm ZA: 315 mm ZI: 75 mm Auction-ID: A7-47742-121