ALLMATIC hd used machines

ALLMATIC LC 160/200

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

Pendulum jaw for 125mm width and 160mm width Extremely flexible. Strong execution.

thickness of jaw: 160 mm : 53 mm clamping width: 305 mm clamping capacity: 5,7 t weight: 60 kg dimensions of the machine ca.: 700 x 160 x 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD3-2W-BcA-025AY-WYD2 / HD3-2WD-BcA-025A-WYD2 -Pressure reducing valve: HG3H-P-D3-025Y -Check Valve: HK3H-P-Q1-025Y -Individual components: see photos -Submission/Price: complete -Dimensions: 300/135/H250 mm -Weight: 14.8 kg

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

COMPLETE HIGHSPEED SAWMILL LINE (capacity 80 000 fm): HIGH PERFORMANCE SASH GANG SAW ESTERER EWD HDN 600 WITH BV......

TECHNICAL DATA: Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of construction: 2001 Drive power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT - Spur gear adjustable on both sides (left/right) - General overhaul 2012, since the reserve gearbox - Incl. new on-board disc and multi-wedge shaft (overhaul 2011) **************************** TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of manufacturing: 2001 Drive Power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT: - Spur gear adjustable on both sides (left/right). - General overhaul 2012, sinve then reserve - Incl. new flanged pulley and splined shaft (overhaul 2011)

TECHNICAL DATA: Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of construction: 2001 Drive power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT - Spur gear adjustable on both sides (left/right) - General overhaul 2012, since the reserve gearbox - Incl. new on-board disc and multi-wedge shaft (overhaul 2011) **************************** TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of manufacturing: 2001 Drive Power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT: - Spur gear adjustable on both sides (left/right). - General overhaul 2012, sinve then reserve - Incl. new flanged pulley and splined shaft (overhaul 2011)

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

EWD HDN/SV with width adjustment TOP ZUSTAND ! (1982/2009) WATER-CLOSED FUEHRS, SIDE BRETTERKAPPSAEGE... Through width 735 Passage shoe710 Hub 600 Speed max. 300 Feed speed 0-15 m/min Feed capacity 8.5 m/min Total weight 12 t SPALTKEIL ARTA C WITH SIDE WAREKAPPSAeGE Very well maintained facility little cut ! HDN-SV STATUS: VERY GOOD

Three knife trimmer semi automatic Input height max 460 x 360 mm ; working condition

Esterer HDE71 Stroke 500mm fully hydraulic

YEAR: 1988 HOURS: 12,000

M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min. Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3 motor AH 250 M-4; 400V; 50 Hz Dimensions LxWxH: approx. 1665x1212x1641 mm Weight: approx. 1050 kg Built: 2008 Condition: in very good used condition. Includes complete documentation.

Sagegatter Esterer HDE 71 pass 710 motor 55kw chip car auxiliary car spaltkail

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

turning diameter over bed: 920 mm turning diameter over slide rest: 600 mm turning length: 12000 mm loading capacität: 20 tons turning speed range: 3,6 - 172 U/min volt: 380 V total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,800x900x1,450 mm Weight: approx. 1,230 kg Year of construction: 2015 Condition: in very good used condition.

Stationary high-pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Operating pressure: 610 bar Flow rate: 78 l/min. Drive speed: 1500 rpm. Drive power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,700x850x1,450 mm Weight: approx. 1,200 kg Year of construction: 2018 Condition: after service by Hammelmann in October 2020 only a few weeks run and for more than a year out of operation. In very good used condition.

Builder: HAAS Model: 700/1500 HDWV-D Motor: CAT C9 300 HP Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm Year: 2011 Hourly Production: 30 t/h Rotor: 2 Pz (TWIN SHAFT) Rotor Data: L. 1.500 mm x D. 700 mm Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS Weight: 19.000 Kg