16 ALPINE mills used machines

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

Used mill Alpine 500.

Kolloplex pin mill type 630 Z, Drive : 55 KW Weight : 1100 kg; --> Stifscheiben diameter housing and door side : 630 mm;

Mill, Used Machine Type : B 315 Manufacturer : Alpine

Mill, Use Machine Type : B 315 U Manufacturer : Alpine Material : Mild steel

Mill, Used Machine Type : B 315 Manufacturer : Alpine

Machines No 53423, 5.5KW incl. soundproof booth

Alpine pin mill A 400 CW. Mining by the buyer is required. 2 x available

Hammer mill Voest Alpine Unirotor 490/190. 2 x available.

rpm : 6.300 Weight : 220 kg.

* General * SKU364X867 * LocationBarneveld * CEcheck * MakeHosokawa Alpine * Main Features * Motor18.5 KW * Inlet diameter150 mm * Width165 mm * Specified Features - Hammer Mill * Hammer millcheck * Grinding room sizeø 300 mm * Moving hammers24 * Hammer width12 pieces 40 mm and 12 pieces 60 mm * With sieve cagecheck * Housing dimensions ø 300 mm * Inletø 150 mm * Motor18,5 kW (400 V, 2955 rpm) * Speed6900 rpm * Hammer Mills * MaterialStainless steel * General * TypeMP2-W * No.P1 187094 /4050 * Year of construction2013 * Mounted on framecheck * Floor space2,50 x 0,95 m * Total height0,80 m * Weight550 kg * Extra SpecificationsWith:dust filter AZOblower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpmhopper with gear motor: 0.2 kW, 2730 rpmHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer ...

Used impact mill made by Alpine, type: B500.

Used impact mill made by Alpine, type: OMNT200. New: 1962.

Auxiliary mill used for PVC granules, 2.2 kW Function unknown because the mill has not been used for a long time can be tested before final purchase or collection

* General * SKU291Y468 * LocationBarneveld * MakeHosokawa Alpine * Main Features * Motor15 KW * Width335 mm * Specified Features - Hammer Mill * Hammer millcheck * Rotor sizeø 260 x 300 mm * Moving hammers18 * Hammer width125 mm * Without sieve cagecheck * Housing dimensions 520 x 310 mm * Inlet335 x 155 mm * Motor15 kW (380 V 1460 rpm) * General * TypeOmniplex 40/32HA * Floor space0,80 x 0,75 m * Total height0,65 m * Weight960 kg * Extra SpecificationsStaal soort 1.2826Hammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteHosokawa AlpineMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedInd ...

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Weight 1750 kg Length x Width x Height 1800 mm x 1350 mm x 3000 mm Machine data: rotor diameter - knife circle : 500 mm length rotor : 630 mm angular speed rotor : appr. 650 min-1 after-run duration : appr. 60 sec. motor power - depent of order: 37 kW / 1500 min-1 45 kW / 1500 min-1 idle power :appr. 30 - 40 % of nominal power. Very good condition, ready to work. You can also get the entire system with all components.

Material: steel Engine: 75 kW Pin-disk Capasity factor: F=ca. 6,3 Drive: 75 kw Speed: 4900 The machine is as good as new. You can also get the entire system with all components.

Material: steel Engine 11 kW Very good condition. You can also get the entire system with all components.

Drive: 30 KW

Material: mild steel Drive: 45 KW Weight: 2000 kg Dimensions: 1500 x 1500 x 1600 mm

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).