296 ARBURG used machine for sale

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible.

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004) Clamping force: 250 t Tie-bar spacing: 630 × 630 mm Platen size: 900 × 900 mm Mold height (Min / Max): 300 – 700 mm Maximum daylight (open space): 1,300 mm Opening stroke: 600 mm Ejector stroke: 225 mm Ejector force: 86 kN Screw diameter: 55 mm Shot volume: 558 cm³ Injection pressure: ~2,380 bar Number of heating zones: 12 Control system: Selogica Machine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H) Machine weight:  14,000 kg Installed power / electricity: ~68 kW Robot / automation interface: Euromap 2500‑1300 Core pullers: hydraulic

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...

Ref. no.: 18643 Hersteller: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Machine weight: 4850 kg Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67).

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons   Tie-bar Spacing: (H × V): 470 mm × 470 mm   Maximum Plate Size : 650 mm × 650 mm   Minimum Mould Installation Height: 250 mm   Maximum Distance between Platen (when fully open): ~750 mm   Mould Opening Stroke : 500 mm   Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³   Approximate Shot Weight (for PS): 210 g   Injection Pressure: 1 670 bar   Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power   Heating Power: Example listing ~ 10.2 kW   Machine Dimensions (Length × Width × Height):  5.4 m × 2.0 m × 2.2 m   Machine Weight:4 500 kg  

Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h

Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Hours : 138000 h

Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Arburg 820 S 4000-3200 (2005) Clamping Force: 400 ton Screw Diameter: 90 mm Shot Weight: 1860 g Injection Volume: 2036 cm³ Injection Pressure: 1580 bar Opening Stroke: 700 mm Distance Between Tie Bars: 820 × 820 mm Mould Height Min/Max: 350 – 850 mm Opening Width: 1050 – 1550 mm Platen Size (h × v): 1171 × 1171 mm Machine Dimensions (L × W × H): 8,3 × 2,3 × 2,4 m Machine Weight: 22 500 kg Working hours : 79.000

Ref. no.: 18591 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

• Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot Find more here - / Contact us at -

Manufacturer: Arburg Model: 320C / 600-250U Year of Manufacture: 2010 Specifications: - Clamping Force: 60 tons - Screw Diameter: 30 mm - Operating Hours: 59,165 - Cycles: 2,140,296 Find more here - / Contact us at -

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible.

There are five injection moulding machines Arburg available. 1) Arburg 320C 600-250, year of construction: 2001, operating hours: 83,365h. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h. 3) Arburg 270C 300-100, year of construction: 1999, operating hours: 78,784h. 4) Arburg 320C 300-100, year of construction: 2000, operating hours: 78,784h. 5) Arburg 270C 300-100, year of construction: 2007, operating hours: 59,885h.

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible.

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible.