ATLANTIC at used machines

Type / type: ATSL 3013 Fabr./ make: Atlantic Year of construction/ year: 1992 Stock number: 0969 Sheet thickness with largest sheet width/ thickness at max. cutting length: 13 mm ( mild steel ) 6 mm ( stainless steel / high grade steel) Cutting length: 3050 mm Weight/ weight: approx. 8.6 t Specification: Backstop

Offered for sale is an Atlantic guillotine shear. Cutting length: 3000mm, max. cutting thickness: approx. 6mm. Documentation available. An on-site inspection is possible.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 40 mm -Stroke: 200 mm -Hole: Ø50 mm -Pitch spacing: retracted 725 mm -Dimensions: 850/130/187 mm -Weight: 32.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure booster cylinders, hydraulic cylinders for guillotine shears -Hydraulic cylinder: from Atlantic ATS 3006 guillotine shear -Piston rod: Ø 50 mm -Stroke: 220 mm -Hole: Ø50 mm -Pitch spacing: retracted 555 mm -Dimensions: 675/140/196 mm -Weight: 37.3 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Key data: 3050 mm, 6 mm

Guillotine shears hydraulic Manufacturer: Atlantic Type: ATS3000 Year of Make: 1992 Sheet width: 3,050 mm Sheet thickness: 6.0 mm Sheet thickness for stainless steel: 4.0 mm Cutting angle: 0.5 - 3.0 ° Electro-motor backgauge 10-750 mm Engine power: 10.0 kW Weight approx.: 4.800 kg Dimensions L/W/H: 3,750 x 1,600 x 2,450 mm

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 13 mm weight of the machine ca.: 8 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4050 mm, 6 mm

Year of construction 1988 Cutting length 4050 mm Cutting capacity 6 mm Weight approx. 8500 kg Knife renewed about a year ago.

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3460 mm table height: 800 mm 0: 220 bar cutting angle adjustment: 0,5x3 ° down holder: 18 back stop - adjustable: 750 mm front stop - adjustable: 1000 mm main drive: 7,5 kW oil volume: 300 l total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement.

sheet width: 3050 mm plate thickness: 13 mm total power requirement: kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: m - thickness at max. cutting length: 13 mm (mild steel 6 mm, high grade steel) - Specification: - backstop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 12mm at 3010mm sheet width, cutting length: 3050mm, max. pressure: 200bar, min./max. cutting angle: 0.5°-3°, number of hold-downs: 18, max. stroke rate: 21strokes/min, squaring arm length: 1000mm, back gauge: 1000mm, working height: 900mm. Dimensions X/Y/Z: approx. 3800mm/1850mm/2030mm, weight: approx. 9000kg. Documentation available. Inspection possible by appointment.

Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cut line illumination

Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination

FOR SALE – 2 OIL BOILERS IN 40 FT CONTAINERS – COMPLETE "PLUG & PLAY" ???? PACK NEGOMAT INDUSTRIE offers 2 Atlantic Guillot LRR 49 boilers mounted in 40-foot insulated containers, fully equipped and never put into service. Ideal solution for temporary boiler rooms, industrial back-up or heating networks. ⚙️ Technical characteristics • Brand: Atlantic Guillot • Model: LRR 49 • Year: 2009 • Power: 1,400 to 1,650 kW • Max temperature: 110 °C • Water pressure: 6 bar • Burner: Weishaupt L8Z/2 • Burner power: 620 to 3,155 kW • Fuel oil: max consumption 265 kg/h • Electrical power: 5.82 kW • Condition: used equipment never used ???? Comprehensive equipment • Insulated 40 ft container • Boiler + burner mounted and wired • Integrated hydraulic + electrical connections • Control box + regulation • Lighting + security • 100% plug ...

Press brake manufactured in 2003. This ATLANTIC HPES-40-135 features a capacity of 135 T and operates at a voltage of 380 V, 50 Hz. It includes a Robosoft ATS 550 control system and has a total weight of 2650 KG. If you are looking to get high-quality bending capabilities, consider the ATLANTIC HPES-40-135 machine we have for sale. Contact us for further details.

* General * SKU347W893 * LocationBarneveld * CEcheck * MakeAtlantic Zeiser * Specified Features - Labelling Machine * Motor5 KVA, 400 volt * General * Typeiota System * Mach.No.AZ09021000-B0803 * Year of construction2011 * Floor space1,20x1,20 m * Total height2,0 m * Weight370 kg * Extra SpecificationsWith Omega print head, type 36i,&:nbsp:Adventech touchscreen control, Electronic control System, cool unit, 2100 watts,&:nbsp:rubber belt conveyor, dimensions 1130x60 mm&:nbsp:Cam reader.with electrical cabinet( as is)OintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIP ...

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Force of pressure: 400 tons of working width: 4100 mm clear stand width: 3150 mm stand projection: 330 mm Electr. Supply: 400 V, 37 kW weight: 25 tons of space: 4100 x 2300 x 3910/530 mm

Various high-quality grinding wheels DM= 220mm, width 30 + 40mm, open-pored grain size 80 - 100- 120. Can be used for JUNG with bore dm 76.2mm, intermediate ring made of aluminium dm 76.2/50.8mm available.

Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,

Press force: 135t, bending length: 3000mm, nominal bending length: 2600mm, frame width: 2600mm, throat depth: 250mm, ram stroke: 120mm, working speed: 7mm/s, machine weight: approx. 6800kg. An on-site inspection is possible.