BANDERA tr used machines

BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good

BANDERA TWIN SCREW PVC PIPES EXTRUDER, for pipes with min/max diam.40/200 mm., extruder with n.2 parallel counter-rotating screws Ø 90 mm, Throghput rate 400 kg/hr, missing of screenchamger (can be added separately), n.2 dies available 40 to 125 mm + 125 to 200 mm., Tooling from 40-200 mm (available diam. 100 mm for O-Ring), Bandera 6 mt.long vacuum calibration tank, IPM haul off unit, IPM saw, IPM belling unit, constructed in 1998, totally refurbished in 2006 by Plasco, machine now disconnected, offered RECONDITIONED., availability: immediate, working width: 40-200 mm Ø, capacity: 400 kg/h, conditions: disconnected, type: pipes extrusion line

Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Reifenhäuser Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet

Winder : Bandera Model W 400/1 Contact winder / surfacewinder Roll diameter max: 1200mm Roller width: 1200mm Roll width max: 1100mm Speed: max. 55m/min Longitudinal cutting device 2 or multi-lane Side Slitting Device Automatic roll change Cross-cutting device Role magazine Calibration device Low-friction rollers motor adjustment Adjustment range: for 500-1100mm laying width takeoff unit: Type TPE-1200 Side gusset insertion device Drive: 4-pole 4kW with axial fan Electric cabinet

Extrusion line for 3D monofilament composed of: - 1-spindle extruder, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With dryer hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretching: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large coil unwinder and double rewinder for small coils. - Dehumidifier Brand: Puchades, power: 6.7 KW (9.1 hp), 14 Amp, year: 2014.

Description PVC PELLETIZING LINE Turbo mixing line, turbo mixer Plasmec TRM 600, Cooler Plasmec RFO 1500, Scale for liquid additives Plasmec DGL 150.3 Twin screw extruder Bandera diameter 110HT L/D 22 Electric motor D.C 110 kW Universal screws suitabble for Rigid PVC an Soft PVC Hydraulic screen changer BDO 140 Vibrating granule cooller Stock mixer for granule Bagging machine for 25 kg bags

BANDERA SINGLE LAYER BLOWN FILM EXTRUDER, for LDPE MDPE + RLDPE, 3-stations Piovan volumetric dosing uniit, Screw diam. 80 mm., 200 mm. die, dual-flow Garba Plast head 200 mm (new in 2022), pull off unit, single rewinding unit 1.200 mm. wide, c.a.drive with new inverters, Average throughput rate 100 kg/h, The line can be inspected any time., Recently used for garbage bags, it includes a 1-color printing group, corona treatment, tower included, electric cabinet for conplete management, immediately available, availability: Immediate, PRESENT CONDITIONS: running and testable, ACCESSORIES: corona treatment+1-col. printer

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

Key data: 65

Extruder 1 Screw 65 Ø diam, 30 L/D Brand: Flag engine: 30 KW (40 hp). With electrical panel. Reference: GT-4706

Key data: 60

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Description TURBO MIXING SYSTEM Turbo Mixer BFT 700 Horizontal cooler BFC 2500 Liquid additives scale

A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible.

Screw Diameter: 140 mm // Throughput: 900 kg/h

Materials: LDPE, LLDPE, mLLDPE, Metallocene, EVA, EVOH, PA // Film Width (Max): 1800 mm

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad  ...

GT-5315 1-Spindle Extruder - Brand: FLAG - Ø 120 mm - 2.2 meters long spindle - With 75 hp (55 KW) engine - No electrical panel

GT-5354 Single Spindle Extruder - Brand: FLAG - Diameter: 100 mm 25 L/D - Spindle length: 2.5 metres

GT-5350 Single Spindle Extruder - Brand: FLAG - Diameter: 120 mm 25 L/D - Spindle length: 3 meters - Extruder electrical panel

GT-5353 Single Spindle Extruder - Brand: FLAG - Diameter: 120 mm 25 L/D - Spindle length: 3 meters - Extruder electrical panel

GT-5355 Single Spindle Extruder - Brand: FLAG - Diameter: 80 mm 25 L/D - Spindle length: 2 meters - Extruder electrical panel

This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. Worlds first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine.

Transformer - Voltage Transformer 500 --> 220V 10kVA Manufacturer Flasshoff & Klosterberg Type DTB10kVA JP43 Power 10kVA Primae 3x500V 12A Sekundaer 3x220V 26,20A Hz 50-60 Insulating-Kl.E Special price

Mould transport system, capway

Turn 180 , Fabr. unknown, for belt width 330 mm,