12 BOSCHERT notching machines used machines

offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg

Key data: 6 mm

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69

Key data: 225 mm

Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°

Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

incl. integrated punching station Cutting angle range: 30°-120°, Sheet thickness up to 6 mm Punching capacity 15 tons Table approx. 1000 x 650 mm, incl Footswitches, div tools and stops Manual

Offer 26125 Technical data: - Cutting length up to 150 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 3 mm - Cutting angle infinitely adjustable 30° - 120 ° - Pneumatic clamping of the cutting angle adjustment - Stroke 22 mm - Stroke rate 60 1/min - Table support surface with T-slots and depth stops - Table height 900 mm - Drive 400 V / 3 kW - E - Footswitch - Space requirement approx. W 1000 x H 1150 x D 1400 mm - Weight approx. 850 kg

plate thickness: 3 (VA), 4 (ST 40) mm cutting angle adjustment: 30 - 120 ° cutting length: 200 mm throat: 300 mm table height: 900 mm work stroke: max. 40 mm no. of strokes: max. 40 Hub/min Punching capacity: 125 kN punch diameter: max. 105 mm total power requirement: 4 kW weight of the machine ca.: 20 t dimensions of the machine ca.: L 1,5x B 1,3 x H 1,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting angle: 90 ° cutting length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 1989 angle stop: 30 -120 Grad good condition: . : Anschlag weight: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible.

High-precision and versatile punching/nippling machine Boschert Compact 500 CNC Z (built in 2011) – Ideal for flexible sheet metal processing! We sell a powerful and reliable punching/nippling machine from the quality manufacturer Boschert, which convinces with its extended equipment and precision. This machine is the ideal solution for a wide range of Spectrum of punching and nipple tasks, from individual parts to large series. Features that convince: • Manufacturer: Boschert • Type: Compact 500 500 x 1000 CNC Z • Year of manufacture: 2011 • Intuitive CNC control: Multi-axis Ladob control with graphical user interface for easy Programming and visualization of the machining processes. • Extended working range for greater flexibility: o X-axis: 0 - 2000 mm (allows the machining of long workpieces) o Y-axis: 0 - 750 mm (offers generous space for wide sheets) ...

BOSCHERT G CUT 2504 CNC guillotine shears were manufactured in 2014 in Germany. The guillotine is designed for cutting metal sheets with a maximum length of 2600 mm and a thickness of 4 mm (mild steel st42) or 2 mm (stainless steel). The sheet metal is held in place by 13 hydraulic clamps and, thanks to the installed CNC controller with touch panel, it is also possible to store many different work programmes, making the machine very useful and versatile. After entering the parameters of the steel sheet to be cut, the controller automatically sets the cutting gap, choices the angle of the upper knife and the appropriate pressure force and then starts the cutting process. The guillotine is also equipped with, among other things: a foot control to facilitate the operator’s work, light curtains to prevent a worker from entering the working area of the machine and an automatic metal shee ...

plate thickness: 3 mm pressure: ? t total power requirement: 3,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 0,9 x 1,1 m No. 3549 Notching machine BOSCHERT K 30 / 120 MINI No. 1 Working area: Table 800 x 450 Drive: 3,5 Foot switch Table 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°) Space requirement approx. 1300 x 900 x 1100 mm Weight approx. 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 t : 2000 mm : 1000 mm machine weight ab.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 t : 2000 mm : 1000 mm machine weight ab.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm blade length: 150 mm cutting angle: 30-120 ° Table dimensions: 1000x650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deburring of sheet metal edges using rotating stainless steel brushes up to sheet thickness 6 mm

control panel: Boschert Stanze Year: 1990 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 56.0 t chamfer lenght: 1400 mm distance between columns: 1300 mm throat: 220 mm stroke: 200 mm dayligth: 485 mm work speed: 8.0 - 10.0 m/min return speed: 35.0 mm/sec Control: CNC Boschert back stop - adjustable: 0 - 370 mm work height max.: 915 mm Cylinders :: 2 Stück voltage: 3x 400 V connected load: 8.0 kVA weight: 3700 kg range L-W-H: 2320 x 1280 x 2030 mm ** very good / well-maintained condition (!!) ** with lots of bending tools - in checked conditions - machine video - https://www.youtube.com/watch?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, includin ...

: 4.0 mm : 3.0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3.0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first no ...

plate thickness: 8 mm pressure: 60 t notching: width x thickness: 310-310-8 mm mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4 mm ST plate thickness: 3 mm VA blade length: 225 mm engine output: 3,5 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1250 x 900 x 1100 mm Features: - 2x miter stops - 90° fixed angle - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine.